Cover Letter Modular Approval Request

FCC ID: N89-WM141

Cover Letter(s)

Download: PDF
FCCID_1234049

FCC ID: N89- WM141



           Modular Approval Request Letter

Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch
Jan. 26, 2010



Dear Application Examiner,


CyberTAN Technology, Inc.’s 2.4GHz Draft 802.11n 2*2 miniCard Module, FCC ID:
N89- WM141, would like to have your authorization as a modular approval. The
requirements of section 15.212 of FCC rules have been met and shown on the
following statements.

1. “The modular transmitter must have its own RF shielding.” The radio portion of
   this module has been shielded, please see exhibition External Photo.

2. “The modular transmitter must have buffered modulation/data inputs.” The EUT
   has buffered data inputs, it is integrated in chip AR9238.

3.    “The modular transmitter must have its own power supply regulation.” The
     modular transmitter has its own power supply regulation built in AR9238.

4. “The modular transmitter must comply with the antenna requirements of section
     15.203 and 15.204(C).” The EUT meets the FCC antenna requirements. The
     spurious emission, unique antenna connector and photo of antennas are shown
     in the test report.

5. “The modular transmitter must be tested in a stand-alone configuration” The EUT
   was placed on an extended card which connected to Notebook Computer as a
   stand-alone configuration. The EUT was tested via the outside a Notebook
   Computer. Please see section Photographs of Test Configuration in the test
   report.

6.    “The modular transmitter must be labeled with its own FCC ID number.” Please
     see exhibition Label Sample for the FCC ID of this module. And also in the
     exhibition Users Manual, there are instructions give to the OEM on how to label
     the end product.




Report No. : RF981211H04


FCC ID: N89- WM141



7. “The modular transmitter must comply with any specific rule or operating
   requirements applicable to the transmitter and the manufacturer must provide
   adequate instructions along with the module to explain any such requirements.”
   The EUT is compliant with all applicable FCC rules. Detail instructions for
   maintaining compliance are given in the Users Manual.

8. “The modular transmitter must comply with any applicable RF exposure
   requirements.” The EUT is compliant with all applicable RF exposure
   requirements. RF Exposure is addressed in the RF exposure exhibition.




Please contact me if you have any further questions. Thanks for your attention.




Best Regards,



May Chen
Deputy Manager of Hsinchu Certification Service Div.
Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch




Report No. : RF981211H04



Document Created: 2010-01-26 16:24:48
Document Modified: 2010-01-26 16:24:48

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC