Modular Cover Letter

FCC ID: N82-KOHLER036

Cover Letter(s)

Download: PDF
FCCID_4245228

                                               Kohler Co.   444 Highland Drive   Kohler, Wisconsin 53044   920—457—4441   kohler.com




                                                                                            KOHLER.
April 9, 2019


To:     SGS North America Inc.
        620 Old Peachtree Road
        SUITE 100
        Suwanee, Georgia
        United States

From:   Kohler Co.
        444 Highland Drive
        Kohler, WI 53044

RE: Request for FCC module certification FCC ID: N82—KOHLERO36

We hereby request a "Modular" certification for the FCC ID referenced above.

The device meets the requirements indicated below as outlined in the FCC KDB 996369 DO1 Module
Equip Auth Guide v01r04
        The device has buffered modulation/data inputs to ensure that the device will comply with Part 15
        requirements with any type of input signal;
        [Kohler]There is a STM32 MCU inside module as an embedded processor to buffer the
        data, and radio frequency circuitry is shielded, please see Internal photo file

        The device has power supply regulation on the module;
        [KohlerJThere is an external LDO chip (TLV70433) on the module as power supply
        regulation

        The device has a permanently attached antenna, or contain a unique antenna connector, and be
        marketed and operated only with specific antenna(s), per Sections 15.203, 15.204(b), 15.204(c),
        15.212(a), 2.929(b);
        [Kohler] The device has a radar transceiver, which has a PCB antenna

        The device has demonstrated compliance in a stand—alone configuration;
        [Kohler] The device has demonstrated compliance in a stand—alone configuration

        The device will be labeled with its permanently affixed FCC ID label, or use an electronic display.
        [Kohler] The label position of module is clear indicated, please see the label file.

        The device does comply with all specific rules applicable to the transmitter including all the
        conditions provided in the integration instructions by the grantee;
        [Kohler] The device is compliant with all applicable FCC rules, detail instructions are given
        in the user manual

        The device does comply with RF exposure requirements.
        [Kohler] The device is compliant with RF exposure requirements, please see External
        photo file.

Sincerely,


Timothy Stessman
Staff Analyst
Kohler Co.



Document Created: 2019-04-09 01:03:56
Document Modified: 2019-04-09 01:03:56

© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC