Modular cover letter

FCC ID: N82-KOHLER032

Cover Letter(s)

Download: PDF
FCCID_4191329

February 27, 2019 To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Kohler Co. 444 Highland Drive Kohler, WI 53044 RE: Request for FCC module certification FCC ID: N82-KOHLER032, N82-KOHLER033 We hereby request a "Modular" certification for the FCC ID referenced above. The device meets the requirements indicated below as outlined in the FCC KDB 996369 D01 Module Equip Auth Guide v01r04 • The module has metal case covering top and sides as its own RF shielding. The shielding at bottom is implemented by the GND copper plane in PCB substrate. • [Kohler]Please see External Photo.pdf • The device has buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal; [Kohler]There is a STM32 MCU inside module as an embedded processor to buffer the data • The device has power supply regulation on the module; [Kohler]There is an external LDO chip on the module as power supply regulation • The device has a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per Sections 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b); [Kohler] The device integrated a BLE module and a Wi-Fi module, both of them have a PCB antenna • The device has demonstrated compliance in a stand-alone configuration; [Kohler] The device has demonstrated compliance in a stand-alone configuration • The device will be labeled with its permanently affixed FCC ID label, or use an electronic display. [Kohler] The label position of module is clear indicated, please see the label file. • The device does comply with all specific rules applicable to the transmitter including all the conditions provided in the integration instructions by the grantee; [Kohler] The device is compliant with all applicable FCC rules, detail instructions are given in the user manual • The device does comply with RF exposure requirements. [Kohler] The device is compliant with RF exposure requirements, please see MPE file. Sincerely,

Timothy Stessman Staff Analyst Kohler Co.


Document Created: 2019-02-27 17:29:54
Document Modified: 2019-02-27 17:29:54
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC