RF Exposure Info

FCC ID: N82-KOHLER021

RF Exposure Info

Download: PDF
FCCID_3357624

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. 588 West Jindu Road, Xinqiao, Songjiang, 201612 Shanghai, China Telephone: +86 (0) 21 6191 5666 Fax: +86 (0) 21 6191 5678 Report No.: SHEM161100708903 ee.shanghai@sgs.com Page: 1 of 7 1 Cover Page RF Exposure Evalaution REPORT Application No.: SHEM1611007089CR Applicant: Kohler Co. FCC ID: N82-KOHLER021 IC: 4554A-KOHLER021 Equipment Under Test (EUT): NOTE: The following sample(s) submitted was/were identified on behalf of the client as Product Name: UART CLOUD MODULE Model No.(EUT): 1293627 Standards: FCC Rules 47 CFR §2.1091(KDB447498 D01 General RF Exposure Guidance v06) RSS-102 Issue 5 (March 2015) Date of Receipt: 2016-11-03 Date of Test: 2017-01-22 to 2017-02-17 Date of Issue: 2017-02-17 Test Result: Pass* * In the configuration tested, the EUT detailed in this report complied with the standards specified above. Parlam Zhan E&E Section Manager SGS-CSTC (Shanghai) Co., Ltd. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e- document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction. documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to thesample(s) tested and such sample(s) are retained for 90 days only

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHEM161100708903 Page: 2 of 7 2 Contents Page 1 COVER PAGE ................................................................................................................................................. 1 2 CONTENTS ..................................................................................................................................................... 2 3 GENERAL INFORMATION ......................................................................................................................... 3 3.1 CLIENT INFORMATION.................................................................................................................................... 3 3.1 GENERAL DESCRIPTION OF E.U.T. ................................................................................................................. 3 3.2 TECHNICAL SPECIFICATIONS .......................................................................................................................... 3 3.3 TEST LOCATION ............................................................................................................................................. 4 3.4 TEST FACILITY ............................................................................................................................................... 4 4 TEST STANDARDS AND LIMITS ............................................................................................................... 5 5 MEASUREMENT AND CALCULATION ................................................................................................... 5 5.1 MAXIMUM TRANSMIT POWER ........................................................................................................................ 6 5.2 MPE CALCULATION....................................................................................................................................... 6 6 EUT CONSTRUCTIONAL DETAILS .......................................................................................................... 7 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to thesample(s) tested and such sample(s) are retained for 90 days only

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHEM161100708903 Page: 3 of 7 3 General Information 3.1 Client Information Applicant: Kohler Co. Address of Applicant: 444 Highland Drive, Kohler, WI 52044 3.1 General Description of E.U.T. Brand Name: KOHLER Product Description: Module with2.4GHz band DTS and BT function Power Supply: DC 5V 3.2 Technical Specifications BT 4.0: 2402MHz~2480MHz Operation Frequency: DTS: 802.11 b/g/n(HT20): 2412MHz-2462MHz Bluetooth Version: BT 4.0 Single mode BT 4.0: GFSK Modulation Technique: DTS: 802.11b: DSSS(CCK, DQPSK, DBPSK) 802.11g: OFDM(64QAM, 16QAM, QPSK, BPSK) Number of Channel: BT: 40 BT 4.0: PIFA Antenna Antenna Type DTS: PCB Antenna BT 4.0: 0dBi Antenna Gain DTS: 2 dBi This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to thesample(s) tested and such sample(s) are retained for 90 days only

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHEM161100708903 Page: 4 of 7 3.3 Test Location All tests were performed at: SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. No.588 West Jindu Road, Songjiang District, Shanghai, China.201612. Tel: +86 21 6191 5666 Fax: +86 21 6191 5678 3.4 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • CNAS (No. CNAS L0599) CNAS has accredited SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories (CNAS- CL01 Accreditation Criteria for the Competence of Testing and Calibration Laboratories) for the competence in the field of testing. Date of expiry: 2017-07-14. • FCC – Registration No.: 402683 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. has been registered and fully described in a report filed with the Federal Communications Commission (FCC). The acceptance letter from the FCC is maintained in our files. Registration No.: 402683, Expiry Date: 2017-09-16. • Industry Canada (IC) – IC Assigned Code: 8617A The 3m Semi-anechoic chamber of SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. has been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 8617A-1. Expiry Date: 2017-06-18. • VCCI (Member No.: 3061) The 3m Semi-anechoic chamber and Shielded Room of SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. has been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: R-3868, C-4336, T-2221, G-830 respectively. Date of Expiry: 2017-11-16. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to thesample(s) tested and such sample(s) are retained for 90 days only

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHEM161100708903 Page: 5 of 7 4 Test Standards and Limits According to§1.1310 Radiofrequency radiation exposure limits: The limit for general population/uncontrolled exposures 2 Averaging Frequency Power density(mW/cm ) time(minutes) 300MHz~1.5GHz f/1500 30 1.5GHz~100GHz 1.0 30 4.1 IC Radiofrequency radiation exposure limits: According to RSS-102 section 2.5.2, RF exposure evaluation is required if the separation distance between the user and/or bystander and the device’s radiating element is greater than 20 cm, except when the device operates as follows: below 20 MHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 1 W (adjusted for tune-up tolerance); • at or above 20 MHz and below 48 MHz and the source-based, time-averaged maximum e.i.r.p. of the 0.5 device is equal to or less than 4.49/ƒ W (adjusted for tune-up tolerance), where ƒ is in MHz; • at or above 48 MHz and below 300 MHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 0.6 W (adjusted for tune-up tolerance); • at or above 300 MHz and below 6 GHz and the source-based, time-averaged maximum e.i.r.p. of the -2 0.6834 device is equal to or less than 1.31 x 10 ƒ W (adjusted for tune-up tolerance), where ƒ is in MHz; • at or above 6 GHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 5 W (adjusted for tune-up tolerance). For 2.4G device, the limit of worse case is 2.68 W(42.8dBm) This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to thesample(s) tested and such sample(s) are retained for 90 days only

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHEM161100708903 Page: 6 of 7 5 Measurement and Calculation 5.1 Maximum transmit power The Power Data is based on the RF Test Report SHEM161100708901 & SHEM161100708902. Test Data: For BT: Test Frequency Reading Power Cable Loss Output Power Limit Test Test Channel (MHz) (dBm) (dB) (dBm) (dBm) Result Lowest 2402 2.05 0.5 2.55 30 Pass Middle 2440 1.91 0.5 2.41 30 Pass Highest 2480 1.40 0.5 1.90 30 Pass For DTS: Test Reading Power Output Power Test mode Limit (dBm) Result Channel (dBm) (dBm) 2412 20.18 20.68 Pass 802.11b 2437 20.17 20.67 Pass 2462 19.73 20.23 Pass 2412 23.91 24.41 Pass 802.11g 2437 24.01 24.51 30 Pass 2462 23.96 24.46 Pass 2412 23.35 23.85 Pass 802.11 n(HT20) 2437 23.13 23.63 Pass 2462 23.15 23.65 Pass 5.2 MPE Calculation PG According to the formula S= , we can calculate S which is MPE. 4R 2π Note: dBm 10 1) P (Watts) =Power Input to antenna = 10 / 1000 2) G (Antenna gain in numeric) = 10^ (Antenna gain in dBi /10) 3) R = distance to the center of radiation of antenna (in meter) = 20cm 4) MPE limit = 1mW/cm² This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to thesample(s) tested and such sample(s) are retained for 90 days only

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHEM161100708903 Page: 7 of 7 For BT: The Max Conducted Peak Output Power is 2.55 dBm (1.80mW); The best case gain of the antenna is 0dBi. 0dB logarithmic terms convert to numeric result is nearly 1. PG 1.80 × 1 2 So, S= = =0.00036 mW/cm 2 4R π 4 × 400 × 3 .1 4 For DTS: The Max Conducted Peak Output Power is 24.51dBm (282.49mW); The best case gain of the antenna is 2dBi. 2dB logarithmic terms convert to numeric result is nearly 3 PG 282.49 × 1 2 So, S= = x3=0.1686 mW/cm 2 4R π 4 × 400 × 3.14 The BT and the DTS modules cann’t simultaneous transmitting at frequency 2.4GHz band, according to the KDB447498 section 7.1 determine the device is exclusion from SAR test. For IC, the limit of worse case is 2.68 W(42.8dBm) 6 EUT Constructional Details Refer to the < UART _External Photos > & < UART _Internal Photos>. --End of the Report-- This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to thesample(s) tested and such sample(s) are retained for 90 days only


Document Created: 2017-04-12 12:30:03
Document Modified: 2017-04-12 12:30:03
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC