MODULAR APPROVAL STATEMENT

FCC ID: N7NWISMO228

Cover Letter(s)

Download: PDF
FCCID_1188960

Date: October 20, 2009 Request for Modular Approval FCC ID: N7NWISMO228/ IC: 2417C-WISMO228 Item Requirements EUT 1 The final device is designed for mobile or fixed operation This mini-PCI express Quadband Modem module will be (Portable is not permitted – Reference TCB Exclusion List installed in a host product where the transmitting antenna (17 July 2002) II (g)). can provide 20cm separation distance to the body of user. This module is sold to OEM and will only be installed by OEM or OEM authorized installer. Install this module in a portable configuration is not allowed unless proper equipment authorization has obtained. 2 The maximum antenna gain to allow compliance with RF The antenna gain including cable loss must not exceed exposure requirements is listed on the Grant of 7.5 dBi in cellular band and 3.6 dBi in PCS band, for Certification for the module. purpose of 2.1043 and 2.1091. Above MPE estimate is based upon the measured peak conducted output power. MPE estimate is submitted via separate RF exposure attached. 3 The licensed module must have a FCC label on the module Please refer to the FCC label format. Labeling instruction itself. That FCC ID label must be visible through a window has been provided in the OEM installation instruction. on the final device or it must be visible when an access panel, door or cover is easily removed. If not, a second label must be placed on the outside of the final device that contains the following text: Contains FCC ID: N7NWISMO228/ IC: 2417C-WISMO228 4 The Grant should include the following words in the Modular approval is requested for this application. device description or grant notes: “modular transmitter” or “transmitter module”. 5 The modular transmitter must have its own RF shielding. The module platform is fully shielded to prevent interference between the host computer and the platform. 6 The modular transmitter must have buffered modulation/ The buffer is provided through UART connection. data inputs. 7 The modular transmitter must have its own power supply The power to the module will be provided through 3.6V regulation. supply pins from the notebook. Effective Date: Immediately _____________ Ying Wang


Document Created: 2009-10-23 11:18:00
Document Modified: 2009-10-23 11:18:00
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC