Revised SAR Plots Cellular

FCC ID: N7NU598

RF Exposure Info

Download: PDF
FCCID_994887

Date/Time: 8/13/2008 12:15:41 PM Test Laboratory: Compliance Certification Services USB Horizontal-down DUT: USB598; Type: USB Modem; Serial: FCC2-F2B Communication System: CDMA; Frequency: 836.52 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 836.52 MHz; σ = 0.995 mho/m; εr = 54.7; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 25.0 deg. C; Liquid Temperature: 24.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(10.22, 10.22, 10.22); Calibrated: 4/23/2008 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 11/16/2007 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 EV-DO Rel 0 @12 mm - M ch 2/Area Scan (7x9x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.650 mW/g EV-DO Rel 0 @12 mm - M ch 2/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 6.74 V/m; Power Drift = -0.471 dB Peak SAR (extrapolated) = 0.828 W/kg SAR(1 g) = 0.571 mW/g; SAR(10 g) = 0.382 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.659 mW/g

Date/Time: 7/25/2008 3:13:19 PM Test Laboratory: Compliance Certification Services USB Horizontal-up DUT: USB598; Type: USB Modem; Serial: FCC2-F2B Communication System: CDMA; Frequency: 824.7 MHz;Duty Cycle: 1:1 Medium parameters used: f = 825 MHz; σ = 0.995 mho/m; εr = 55.6; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 25.5 deg. C; Liquid Temperature: 23.5 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(10.22, 10.22, 10.22); Calibrated: 4/23/2008 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 11/16/2007 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 EV-DO Rel 0 @12 mm - L-ch/Area Scan (7x8x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.825 mW/g EV-DO Rel 0 @12 mm - L-ch/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 9.82 V/m; Power Drift = 0.204 dB Peak SAR (extrapolated) = 1.20 W/kg SAR(1 g) = 0.799 mW/g; SAR(10 g) = 0.517 mW/g Maximum value of SAR (measured) = 0.946 mW/g

Date/Time: 7/25/2008 2:47:05 PM Test Laboratory: Compliance Certification Services USB Horizontal-up DUT: USB598; Type: USB Modem; Serial: FCC2-F2B Communication System: CDMA; Frequency: 836.52 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 836.52 MHz; σ = 1.01 mho/m; εr = 55.4; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 25.5 deg. C; Liquid Temperature: 23.5 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(10.22, 10.22, 10.22); Calibrated: 4/23/2008 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 11/16/2007 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 EV-DO Rel 0 @12 mm - M-ch/Area Scan (7x8x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.02 mW/g EV-DO Rel 0 @12 mm - M-ch/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 10.9 V/m; Power Drift = -0.082 dB Peak SAR (extrapolated) = 1.50 W/kg SAR(1 g) = 0.990 mW/g; SAR(10 g) = 0.636 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.17 mW/g

Date/Time: 7/25/2008 3:48:40 PM Test Laboratory: Compliance Certification Services USB Horizontal-up DUT: USB598; Type: USB Modem; Serial: FCC2-F2B Communication System: CDMA; Frequency: 848.31 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 848.31 MHz; σ = 1.02 mho/m; εr = 55.3; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 25.5 deg. C; Liquid Temperature: 23.5 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(10.22, 10.22, 10.22); Calibrated: 4/23/2008 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 11/16/2007 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 EV-DO Rel 0 @12 mm - H ch/Area Scan (7x8x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.04 mW/g EV-DO Rel 0 @12 mm - H ch/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 10.7 V/m; Power Drift = 0.010 dB Peak SAR (extrapolated) = 1.56 W/kg SAR(1 g) = 0.976 mW/g; SAR(10 g) = 0.627 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.15 mW/g

Date/Time: 7/25/2008 4:33:14 PM Test Laboratory: Compliance Certification Services USB Vertical-left DUT: USB598; Type: USB Modem; Serial: FCC2-F2B Communication System: CDMA; Frequency: 836.52 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 836.52 MHz; σ = 1.01 mho/m; εr = 55.4; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 25.5 deg. C; Liquid Temperature: 23.5 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(10.22, 10.22, 10.22); Calibrated: 4/23/2008 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 11/16/2007 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 EV-DO Rel 0 @ 12 mm - M-ch/Area Scan (7x8x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.852 mW/g EV-DO Rel 0 @ 12 mm - M-ch/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 9.68 V/m; Power Drift = -0.160 dB Peak SAR (extrapolated) = 1.14 W/kg SAR(1 g) = 0.767 mW/g; SAR(10 g) = 0.502 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.900 mW/g

Date/Time: 8/13/2008 10:46:20 AM Test Laboratory: Compliance Certification Services USB Vertical-Right DUT: USB598; Type: USB Modem; Serial: FCC2-F2B Communication System: CDMA; Frequency: 836.52 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 836.52 MHz; σ = 0.995 mho/m; εr = 54.7; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 25.0 deg. C; Liquid Temperature: 24.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(10.22, 10.22, 10.22); Calibrated: 4/23/2008 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 11/16/2007 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 EV-DO Rel 0 @ 12 mm - M ch/Area Scan (7x9x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.249 mW/g EV-DO Rel 0 @ 12 mm - M ch/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 4.78 V/m; Power Drift = -0.236 dB Peak SAR (extrapolated) = 0.328 W/kg SAR(1 g) = 0.211 mW/g; SAR(10 g) = 0.146 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.245 mW/g


Document Created: 2008-08-20 17:23:13
Document Modified: 2008-08-20 17:23:13
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC