Modular Approval Letter

FCC ID: N7NSL6087

Cover Letter(s)

Download: PDF
FCCID_1298910

Request for Modular Approval FCC ID: N7NSL6087 Item Requirements EUT 1 The final device is designed for mobile or fixed This Modem module will be operation (Portable is not permitted – Reference installed in a host product TCB Exclusion List (17 July 2002) II (g)). where the transmitting antenna can provide 20cm separation distance to the body of user. This module is sold to OEM and will only be installed by OEM or OEM authorized installer. Install this module in a portable configuration is not allowed unless proper equipment authorization has obtained. 2 The maximum antenna gain to allow The antenna gain including compliance with RF exposure requirements is cable loss must not exceed listed on the Grant of Certification for the 8.0 dBi in Cellular band and module. 3.6 dBi in PCS band, for purposes of 2.1043 and 2.1091. Above MPE estimate is based upon the measured peak conducted output power. MPE estimate is submitted via separate RF exposure attachment. 3 The licensed module must have a FCC ID label Please refer to the FCC ID on the module itself. That FCC ID label must be label format. Labeling visible through a window on the final device or instruction has been it must be visible when an access panel, door or provided in the OEM cover is easily removed. If not, a second label installation instruction. must be placed on the outside of the final device that contains the following text: Contains “FCC ID: N7NSL6087” 4 The Grant should include the following words Modular approval is in the device description or grant notes: requested for this “modular transmitter” or “transmitter module”. application.


Document Created: 2010-06-11 16:11:36
Document Modified: 2010-06-11 16:11:36
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC