Modular Approval

FCC ID: N7NHL7588

Cover Letter(s)

Download: PDF
FCCID_2723363

Modular Approval Checklist FCC ID: N7NHL7588 Item Requirements EUT Module RADIO elements are The radio elements must have the radio frequency circuitry shielded. Please see 1 shielded submitted external photograph exhibits Module chipset design 2 The module must have buffered modulation/data inputs incorporates integrated buffer circuitry Module chipset incorporates The module must contain power supply regulation on the 3 voltage regulation to module transceiver circuitry The module must contain a permanently attached antenna, No applicable to licensed 4 or contain a unique antenna connector, and be marketed modules and operated only with specific antenna(s) EUT conformance testing was The module must demonstrate compliance in a stand‐alone 5 performed in a standalone configuration configuration The licensed module must have a FCC ID label on the module itself. That FCC ID label must be visible through a Please refer to FCC ID label window on the final device or it must be visible when an format. Labeling instruction 6 access panel, door or cover is easily removed. If not, a has been provided in the user second label must be placed on the outside of the final manual exhibit(s). device that contains the following text: Contains “FCC ID: N7NHL7588” The Module is compliant with The module must comply with all specific rules applicable all applicable FCC rules. to the transmitter. The grantee must provide 7 Compliance requirements are comprehensive instructions to explain compliance stated in the user manual requirements exhibit(s). Compliance with RF exposure 8 The module must comply with RF exposure requirements requirements is addressed in RF exposure report


Document Created: 2015-08-19 14:36:00
Document Modified: 2015-08-19 14:36:00
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC