SAR Test Plots

FCC ID: N7NGOBI2

RF Exposure Info

Download: PDF
FCCID_1516544

Date: 7/29/2011 Test Laboratory: UL CCS SAR Lab B GPRS850_SecondaryPortrait Communication System: GPRS-FDD(TDMA,GMSK, 2 slot); Frequency: 836.6 MHz;Duty Cycle: 1:4.00037 3 Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.988 mho/m; εr = 55.488; ρ = 1000 kg/m Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY5 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3773; ConvF(8.67, 8.67, 8.67); Calibrated: 5/3/2011 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1258; Calibrated: 5/2/2011 - Phantom: ELI v5.0 (B); Type: QDOVA001BB; Serial: 1118 - Measurement SW: DASY52, Version 52.6 (2);SEMCAD X Version 14.4.5 (3634) GPRS850/SecondaryPortrait/Area Scan (71x121x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (interpolated) = 0.178 mW/g GPRS850/SecondaryPortrait/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 13.472 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 0.253 W/kg SAR(1 g) = 0.131 mW/g; SAR(10 g) = 0.071 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.175 mW/g 0 dB = 0.180mW/g

Date: 7/29/2011 Test Laboratory: UL CCS SAR Lab B GPRS850_SecondaryPortrait Communication System: GPRS-FDD(TDMA,GMSK, 2 slot); Frequency: 836.6 MHz;Duty Cycle: 1:4.00037 GPRS850/SecondaryPortrait/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.177 mW/g

Date: 7/29/2011 Test Laboratory: UL CCS SAR Lab B GPRS850_Base Communication System: GPRS-FDD(TDMA,GMSK, 2 slot); Frequency: 836.6 MHz;Duty Cycle: 1:4.00037 3 Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.988 mho/m; εr = 55.488; ρ = 1000 kg/m Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY5 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3773; ConvF(8.67, 8.67, 8.67); Calibrated: 5/3/2011 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1258; Calibrated: 5/2/2011 - Phantom: ELI v5.0 (B); Type: QDOVA001BB; Serial: 1118 - Measurement SW: DASY52, Version 52.6 (2);SEMCAD X Version 14.4.5 (3634) GPRS850/Base/Area Scan (131x151x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (interpolated) = 0.096 mW/g GPRS850/Base/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 9.890 V/m; Power Drift = -0.21 dB Peak SAR (extrapolated) = 0.131 W/kg SAR(1 g) = 0.071 mW/g; SAR(10 g) = 0.039 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.094 mW/g 0 dB = 0.090mW/g

Date: 7/29/2011 Test Laboratory: UL CCS SAR Lab B GPRS850_Base Communication System: GPRS-FDD(TDMA,GMSK, 2 slot); Frequency: 836.6 MHz;Duty Cycle: 1:4.00037 GPRS850/Base/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.094 mW/g

Date: 7/29/2011 Test Laboratory: UL CCS SAR Lab B UMTS Band V_SecondaryPortrait Communication System: UMTS-FDD (WCDMA); Frequency: 836.6 MHz;Duty Cycle: 1:1 3 Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.988 mho/m; εr = 55.488; ρ = 1000 kg/m Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY5 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3773; ConvF(8.67, 8.67, 8.67); Calibrated: 5/3/2011 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1258; Calibrated: 5/2/2011 - Phantom: ELI v5.0 (B); Type: QDOVA001BB; Serial: 1118 - Measurement SW: DASY52, Version 52.6 (2);SEMCAD X Version 14.4.5 (3634) UMTS Band V/SecondaryPortrait/Area Scan (91x141x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (interpolated) = 0.252 mW/g UMTS Band V/SecondaryPortrait/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 16.045 V/m; Power Drift = 0.0095 dB Peak SAR (extrapolated) = 0.291 W/kg SAR(1 g) = 0.218 mW/g; SAR(10 g) = 0.156 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.253 mW/g 0 dB = 0.250mW/g

Date: 7/29/2011 Test Laboratory: UL CCS SAR Lab B UMTS Band V_SecondaryPortrait Communication System: UMTS-FDD (WCDMA); Frequency: 836.6 MHz;Duty Cycle: 1:1 UMTS Band V/SecondaryPortrait/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.253 mW/g

Date: 7/28/2011 Test Laboratory: UL CCS SAR Lab B UMTS Band V_Base Communication System: UMTS-FDD (WCDMA); Frequency: 836.6 MHz;Duty Cycle: 1:1 3 Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.988 mho/m; εr = 55.488; ρ = 1000 kg/m Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY5 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3773; ConvF(8.67, 8.67, 8.67); Calibrated: 5/3/2011 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1258; Calibrated: 5/2/2011 - Phantom: ELI v5.0 (B); Type: QDOVA001BB; Serial: 1118 - Measurement SW: DASY52, Version 52.6 (2);SEMCAD X Version 14.4.5 (3634) UMTS Band V/Base/Area Scan (151x171x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (interpolated) = 0.220 mW/g UMTS Band V/Base/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 13.991 V/m; Power Drift = 0.37 dB Peak SAR (extrapolated) = 0.236 W/kg SAR(1 g) = 0.170 mW/g; SAR(10 g) = 0.122 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.198 mW/g 0 dB = 0.200mW/g

Date: 7/28/2011 Test Laboratory: UL CCS SAR Lab B UMTS Band V_Base Communication System: UMTS-FDD (WCDMA); Frequency: 836.6 MHz;Duty Cycle: 1:1 UMTS Band V/Base/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.204 mW/g

Date: 7/29/2011 Test Laboratory: UL CCS SAR Lab B CDMA Cell_SecondaryPortrait Communication System: CDMA2000; Frequency: 836.52 MHz;Duty Cycle: 1:1 3 Medium parameters used (interpolated): f = 836.52 MHz; σ = 0.988 mho/m; εr = 55.488; ρ = 1000 kg/m Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY5 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3773; ConvF(8.67, 8.67, 8.67); Calibrated: 5/3/2011 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1258; Calibrated: 5/2/2011 - Phantom: ELI v5.0 (B); Type: QDOVA001BB; Serial: 1118 - Measurement SW: DASY52, Version 52.6 (2);SEMCAD X Version 14.4.5 (3634) CDMA Cell/SecondaryPortrait/Area Scan (71x121x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (interpolated) = 0.253 mW/g CDMA Cell/SecondaryPortrait/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 15.918 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 0.290 W/kg SAR(1 g) = 0.218 mW/g; SAR(10 g) = 0.155 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.252 mW/g 0 dB = 0.250mW/g

Date: 7/29/2011 Test Laboratory: UL CCS SAR Lab B CDMA Cell_SecondaryPortrait Communication System: CDMA2000; Frequency: 836.52 MHz;Duty Cycle: 1:1 CDMA Cell/SecondaryPortrait/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.253 mW/g

Date: 7/29/2011 Test Laboratory: UL CCS SAR Lab B CDMA Cell_Base Communication System: CDMA2000; Frequency: 836.52 MHz;Duty Cycle: 1:1 3 Medium parameters used (interpolated): f = 836.52 MHz; σ = 0.988 mho/m; εr = 55.488; ρ = 1000 kg/m Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY5 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3773; ConvF(8.67, 8.67, 8.67); Calibrated: 5/3/2011 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1258; Calibrated: 5/2/2011 - Phantom: ELI v5.0 (B); Type: QDOVA001BB; Serial: 1118 - Measurement SW: DASY52, Version 52.6 (2);SEMCAD X Version 14.4.5 (3634) CDMA Cell/Base/Area Scan (131x151x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (interpolated) = 0.210 mW/g CDMA Cell/Base/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 14.877 V/m; Power Drift = -0.20 dB Peak SAR (extrapolated) = 0.253 W/kg SAR(1 g) = 0.184 mW/g; SAR(10 g) = 0.132 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.215 mW/g 0 dB = 0.210mW/g

Date: 7/29/2011 Test Laboratory: UL CCS SAR Lab B CDMA Cell_Base Communication System: CDMA2000; Frequency: 836.52 MHz;Duty Cycle: 1:1 CDMA Cell/Base/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.216 mW/g

Date: 7/28/2011 Test Laboratory: UL CCS SAR Lab B GPRS1900_SecondaryPortrait Communication System: GPRS-FDD(TDMA,GMSK, 2 slot); Frequency: 1880 MHz;Duty Cycle: 1:4.00037 3 Medium parameters used: f = 1880 MHz; σ = 1.496 mho/m; εr = 53.531; ρ = 1000 kg/m Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY5 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3773; ConvF(7.37, 7.37, 7.37); Calibrated: 5/3/2011 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1258; Calibrated: 5/2/2011 - Phantom: ELI v5.0 (A); Type: QDOVA001BB; Serial: 1120 - Measurement SW: DASY52, Version 52.6 (2);SEMCAD X Version 14.4.5 (3634) GPRS1900/SecondaryPortrait/Area Scan (81x131x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.299 mW/g GPRS1900/SecondaryPortrait/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 14.080 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 0.397 W/kg SAR(1 g) = 0.244 mW/g; SAR(10 g) = 0.147 mW/g Maximum value of SAR (measured) = 0.309 mW/g 0 dB = 0.310mW/g

Date: 7/28/2011 Test Laboratory: UL CCS SAR Lab B GPRS1900_SecondaryPortrait Communication System: GPRS-FDD(TDMA,GMSK, 2 slot); Frequency: 1880 MHz;Duty Cycle: 1:4.00037 GPRS1900/SecondaryPortrait/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 0.301 mW/g

Date: 7/28/2011 Test Laboratory: UL CCS SAR Lab B GPRS1900_Base Communication System: GPRS-FDD(TDMA,GMSK, 2 slot); Frequency: 1880 MHz;Duty Cycle: 1:4.00037 3 Medium parameters used: f = 1880 MHz; σ = 1.496 mho/m; εr = 53.531; ρ = 1000 kg/m Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY5 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3773; ConvF(7.37, 7.37, 7.37); Calibrated: 5/3/2011 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1258; Calibrated: 5/2/2011 - Phantom: ELI v5.0 (A); Type: QDOVA001BB; Serial: 1120 - Measurement SW: DASY52, Version 52.6 (2);SEMCAD X Version 14.4.5 (3634) GPRS1900/Base/Area Scan (101x141x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.165 mW/g GPRS1900/Base/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 10.026 V/m; Power Drift = -0.05 dB Peak SAR (extrapolated) = 0.194 W/kg SAR(1 g) = 0.126 mW/g; SAR(10 g) = 0.077 mW/g Maximum value of SAR (measured) = 0.156 mW/g 0 dB = 0.160mW/g

Date: 7/28/2011 Test Laboratory: UL CCS SAR Lab B GPRS1900_Base Communication System: GPRS-FDD(TDMA,GMSK, 2 slot); Frequency: 1880 MHz;Duty Cycle: 1:4.00037 GPRS1900/Base/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 0.168 mW/g

Date: 7/29/2011 Test Laboratory: UL CCS SAR Lab B UMTS Band II_SecondaryPortrait Communication System: UMTS-FDD (WCDMA); Frequency: 1880 MHz;Duty Cycle: 1:1 3 Medium parameters used: f = 1880 MHz; σ = 1.496 mho/m; εr = 53.531; ρ = 1000 kg/m Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY5 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3773; ConvF(7.37, 7.37, 7.37); Calibrated: 5/3/2011 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1258; Calibrated: 5/2/2011 - Phantom: ELI v5.0 (A); Type: QDOVA001BB; Serial: 1117 - Measurement SW: DASY52, Version 52.6 (2);SEMCAD X Version 14.4.5 (3634) UMTS Band II/SecondaryPortrait/Area Scan (91x141x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.408 mW/g UMTS Band II/SecondaryPortrait/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 16.064 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 0.547 W/kg SAR(1 g) = 0.334 mW/g; SAR(10 g) = 0.200 mW/g Maximum value of SAR (measured) = 0.423 mW/g 0 dB = 0.420mW/g

Date: 7/29/2011 Test Laboratory: UL CCS SAR Lab B UMTS Band II_SecondaryPortrait Communication System: UMTS-FDD (WCDMA); Frequency: 1880 MHz;Duty Cycle: 1:1 UMTS Band II/SecondaryPortrait/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 0.426 mW/g

Date: 7/28/2011 Test Laboratory: UL CCS SAR Lab B UMTS Band II_Base Communication System: UMTS-FDD (WCDMA); Frequency: 1880 MHz;Duty Cycle: 1:1 3 Medium parameters used: f = 1880 MHz; σ = 1.496 mho/m; εr = 53.531; ρ = 1000 kg/m Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY5 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3773; ConvF(7.37, 7.37, 7.37); Calibrated: 5/3/2011 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1258; Calibrated: 5/2/2011 - Phantom: ELI v5.0 (A); Type: QDOVA001BB; Serial: 1120 - Measurement SW: DASY52, Version 52.6 (2);SEMCAD X Version 14.4.5 (3634) UMTS Band II/Base/Area Scan (151x171x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.208 mW/g UMTS Band II/Base/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 11.992 V/m; Power Drift = -0.0053 dB Peak SAR (extrapolated) = 0.265 W/kg SAR(1 g) = 0.171 mW/g; SAR(10 g) = 0.106 mW/g Maximum value of SAR (measured) = 0.210 mW/g 0 dB = 0.210mW/g

Date: 7/28/2011 Test Laboratory: UL CCS SAR Lab B UMTS Band II_Base Communication System: UMTS-FDD (WCDMA); Frequency: 1880 MHz;Duty Cycle: 1:1 UMTS Band II/Base/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 0.211 mW/g

Date: 7/28/2011 Test Laboratory: UL CCS SAR Lab B CDMA PCS_SecondaryPortrait Communication System: CDMA2000; Frequency: 1880 MHz;Duty Cycle: 1:1 3 Medium parameters used: f = 1880 MHz; σ = 1.496 mho/m; εr = 53.531; ρ = 1000 kg/m Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY5 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3773; ConvF(7.37, 7.37, 7.37); Calibrated: 5/3/2011 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1258; Calibrated: 5/2/2011 - Phantom: ELI v5.0 (A); Type: QDOVA001BB; Serial: 1120 - Measurement SW: DASY52, Version 52.6 (2);SEMCAD X Version 14.4.5 (3634) CDMA PCS/SecondaryPortrait/Area Scan (81x131x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.395 mW/g CDMA PCS/SecondaryPortrait/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 15.973 V/m; Power Drift = 0.14 dB Peak SAR (extrapolated) = 0.505 W/kg SAR(1 g) = 0.312 mW/g; SAR(10 g) = 0.189 mW/g Maximum value of SAR (measured) = 0.389 mW/g 0 dB = 0.390mW/g

Date: 7/28/2011 Test Laboratory: UL CCS SAR Lab B CDMA PCS_SecondaryPortrait Communication System: CDMA2000; Frequency: 1880 MHz;Duty Cycle: 1:1 CDMA PCS/SecondaryPortrait/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 0.405 mW/g

Date: 7/28/2011 Test Laboratory: UL CCS SAR Lab B CDMA PCS_Base Communication System: CDMA2000; Frequency: 1880 MHz;Duty Cycle: 1:1 3 Medium parameters used: f = 1880 MHz; σ = 1.496 mho/m; εr = 53.531; ρ = 1000 kg/m Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY5 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3773; ConvF(7.37, 7.37, 7.37); Calibrated: 5/3/2011 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1258; Calibrated: 5/2/2011 - Phantom: ELI v5.0 (A); Type: QDOVA001BB; Serial: 1120 - Measurement SW: DASY52, Version 52.6 (2);SEMCAD X Version 14.4.5 (3634) CDMA PCS/Base/Area Scan (101x141x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.210 mW/g CDMA PCS/Base/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 11.719 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 0.256 W/kg SAR(1 g) = 0.164 mW/g; SAR(10 g) = 0.101 mW/g Maximum value of SAR (measured) = 0.202 mW/g 0 dB = 0.200mW/g

Date: 7/28/2011 Test Laboratory: UL CCS SAR Lab B CDMA PCS_Base Communication System: CDMA2000; Frequency: 1880 MHz;Duty Cycle: 1:1 CDMA PCS/Base/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 0.203 mW/g


Document Created: 2011-08-01 21:10:05
Document Modified: 2011-08-01 21:10:05
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC