Sys Check Plots

FCC ID: N7NGOBI2

RF Exposure Info

Download: PDF
FCCID_1481907

Date/Time: 5/11/2011 5:36:16 PM Test Laboratory: UL CCS System Check for D835V2 SN 4D002 DUT: Dipole D835V2; Type: D835V2; Serial: 4d002 Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1 3 Medium parameters used: f = 835 MHz; s = 0.966 mho/m; er = 53.392; ? = 1000 kg/m Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY5 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3686; ConvF(8.78, 8.78, 8.78); Calibrated: 1/24/2011 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1239; Calibrated: 11/17/2010 - Phantom: ELI 4.0; Type: QDOVA001BB; Serial: 1099 - Measurement SW: DASY52, Version 52.6 (1);SEMCAD X Version 14.4.2 (2595) D835V2/Pin=100 mW/Area Scan (6x7x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.044 mW/g D835V2/Pin=100 mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 35.305 V/m; Power Drift = -0.06 dB Peak SAR (extrapolated) = 1.502 W/kg SAR(1 g) = 1 mW/g; SAR(10 g) = 0.659 mW/g Maximum value of SAR (measured) = 1.220 mW/g 0 dB = 1.220mW/g

Date/Time: 5/11/2011 5:51:07 PM Test Laboratory: UL CCS System Check for D835V2 SN 4D002 DUT: Dipole D835V2; Type: D835V2; Serial: 4d002 Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1 D835V2/Pin=100 mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 1.223 mW/g

Date/Time: 5/12/2011 9:46:26 AM Test Laboratory: UL CCS System Check for D835V2 SN 4D002 DUT: Dipole D835V2; Type: D835V2; Serial: 4d002 Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1 3 Medium parameters used: f = 835 MHz; s = 0.96 mho/m; er = 53.052; ? = 1000 kg/m Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY5 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3686; ConvF(8.78, 8.78, 8.78); Calibrated: 1/24/2011 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1239; Calibrated: 11/17/2010 - Phantom: ELI 4.0; Type: QDOVA001BB; Serial: 1099 - Measurement SW: DASY52, Version 52.6 (1);SEMCAD X Version 14.4.2 (2595) D835V2/Pin=100 mW/Area Scan (6x7x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.033 mW/g D835V2/Pin=100 mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 35.388 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 1.486 W/kg SAR(1 g) = 0.991 mW/g; SAR(10 g) = 0.651 mW/g Maximum value of SAR (measured) = 1.206 mW/g 0 dB = 1.210mW/g

Date/Time: 5/12/2011 10:01:13 AM Test Laboratory: UL CCS System Check for D835V2 SN 4D002 DUT: Dipole D835V2; Type: D835V2; Serial: 4d002 Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1 D835V2/Pin=100 mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 1.208 mW/g

Date/Time: 5/13/2011 4:28:32 PM Test Laboratory: UL CCS System Check for D835V2 SN 4D002 DUT: Dipole D835V2; Type: D835V2; Serial: 4d002 Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1 3 Medium parameters used: f = 835 MHz; s = 0.957 mho/m; er = 53.785; ? = 1000 kg/m Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY5 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3686; ConvF(8.78, 8.78, 8.78); Calibrated: 1/24/2011 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1239; Calibrated: 11/17/2010 - Phantom: ELI 4.0; Type: QDOVA001BB; Serial: 1099 - Measurement SW: DASY52, Version 52.6 (1);SEMCAD X Version 14.4.2 (2595) D835V2/Pin=100 mW/Area Scan (6x7x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.027 mW/g D835V2/Pin=100 mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 35.261 V/m; Power Drift = -0.04 dB Peak SAR (extrapolated) = 1.458 W/kg SAR(1 g) = 0.975 mW/g; SAR(10 g) = 0.641 mW/g Maximum value of SAR (measured) = 1.185 mW/g 0 dB = 1.180mW/g

Date/Time: 5/13/2011 4:43:20 PM Test Laboratory: UL CCS System Check for D835V2 SN 4D002 DUT: Dipole D835V2; Type: D835V2; Serial: 4d002 Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1 D835V2/Pin=100 mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 1.187 mW/g

Date/Time: 5/16/2011 2:27:05 PM Test Laboratory: UL CCS System Check D1900V2 SN 5d043 DUT: Dipole 1900 MHz D1900V2; Type: D1900V2; Serial: 5d043 Communication System: CW; Frequency: 1900 MHz;-Duty Cycle: 1:1 3 Medium parameters used: f = 1900 MHz; s = 1.556 mho/m; er = 53.647; ? = 1000 kg/m Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY5 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3686; ConvF(6.99, 6.99, 6.99); Calibrated: 1/24/2011 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1239; Calibrated: 11/17/2010 - Phantom: ELI 4.0; Type: QDOVA001BB; Serial: 1099 - Measurement SW: DASY52, Version 52.6 (1);SEMCAD X Version 14.4.2 (2595) D1900V2/Pin=100 mW/Area Scan (5x6x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 5.390 mW/g D1900V2/Pin=100 mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 60.932 V/m; Power Drift = -0.09 dB Peak SAR (extrapolated) = 7.537 W/kg SAR(1 g) = 4.15 mW/g; SAR(10 g) = 2.17 mW/g Maximum value of SAR (measured) = 5.562 mW/g 0 dB = 5.560mW/g

Date/Time: 5/16/2011 2:41:58 PM Test Laboratory: UL CCS System Check D1900V2 SN 5d043 DUT: Dipole 1900 MHz D1900V2; Type: D1900V2; Serial: 5d043 Communication System: CW; Frequency: 1900 MHz;-Duty Cycle: 1:1 D1900V2/Pin=100 mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 5.542 mW/g

Date/Time: 5/17/2011 9:48:39 AM Test Laboratory: UL CCS System Check D1900V2 SN 5d043 DUT: Dipole 1900 MHz D1900V2; Type: D1900V2; Serial: 5d043 Communication System: CW; Frequency: 1900 MHz;-Duty Cycle: 1:1 3 Medium parameters used: f = 1900 MHz; s = 1.54 mho/m; er = 53.541; ? = 1000 kg/m Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY5 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3686; ConvF(6.99, 6.99, 6.99); Calibrated: 1/24/2011 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1239; Calibrated: 11/17/2010 - Phantom: ELI 4.0; Type: QDOVA001BB; Serial: 1099 - Measurement SW: DASY52, Version 52.6 (1);SEMCAD X Version 14.4.2 (2595) D1900V2/Pin=100 mW/Area Scan (5x6x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 5.210 mW/g D1900V2/Pin=100 mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 60.029 V/m; Power Drift = -0.07 dB Peak SAR (extrapolated) = 7.521 W/kg SAR(1 g) = 4.13 mW/g; SAR(10 g) = 2.16 mW/g Maximum value of SAR (measured) = 5.536 mW/g 0 dB = 5.540mW/g

Date/Time: 5/17/2011 10:06:43 AM Test Laboratory: UL CCS System Check D1900V2 SN 5d043 DUT: Dipole 1900 MHz D1900V2; Type: D1900V2; Serial: 5d043 Communication System: CW; Frequency: 1900 MHz;Duty Cycle: 1:1 D1900V2/Pin=100 mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 5.547 mW/g


Document Created: 2011-05-17 19:52:27
Document Modified: 2011-05-17 19:52:27
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC