SAR Plots 24E

FCC ID: N7NGOBI2

RF Exposure Info

Download: PDF
FCCID_1399009

Date/Time: 12/9/2010 3:21:46 PM Test Laboratory: Compliance Certification Services CDMA2000 PCS_Bottom face DUT: Fujitsu-Australia; Type: NA; Serial: NA Communication System: CDMA PCS Band; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.46 mho/m; εr = 52.6; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.04, 8.04, 8.04); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 M-ch_Ant retracted/Area Scan (9x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.020 mW/g M-ch_Ant retracted/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 3.48 V/m; Power Drift = 0.017 dB Peak SAR (extrapolated) = 0.031 W/kg SAR(1 g) = 0.018 mW/g; SAR(10 g) = 0.015 mW/g

Date/Time: 12/9/2010 3:57:08 PM Test Laboratory: Compliance Certification Services CDMA2000 PCS_Bottom face DUT: Fujitsu-Australia; Type: NA; Serial: NA Communication System: CDMA PCS Band; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.46 mho/m; εr = 52.6; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.04, 8.04, 8.04); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 M-ch_Ant extended/Area Scan (9x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.294 mW/g M-ch_Ant extended/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 14.0 V/m; Power Drift = -0.032 dB Peak SAR (extrapolated) = 0.403 W/kg SAR(1 g) = 0.257 mW/g; SAR(10 g) = 0.165 mW/g Maximum value of SAR (measured) = 0.307 mW/g

Date/Time: 12/9/2010 12:30:45 PM Test Laboratory: Compliance Certification Services CDMA2000 PCS_Secondary Landscape DUT: Fujitsu-Australia; Type: NA; Serial: NA Communication System: CDMA PCS Band; Frequency: 1851.25 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 1851.25 MHz; σ = 1.42 mho/m; εr = 52.7; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.04, 8.04, 8.04); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 L-ch_Ant retracted/Area Scan (7x10x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.885 mW/g L-ch_Ant retracted/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 25.4 V/m; Power Drift = -0.145 dB Peak SAR (extrapolated) = 2.25 W/kg SAR(1 g) = 0.996 mW/g; SAR(10 g) = 0.436 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.40 mW/g 0 dB = 1.40mW/g

Date/Time: 12/9/2010 11:45:29 AM Test Laboratory: Compliance Certification Services CDMA2000 PCS_Secondary Landscape DUT: Fujitsu-Australia; Type: NA; Serial: NA Communication System: CDMA PCS Band; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.46 mho/m; εr = 52.6; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.04, 8.04, 8.04); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 M-ch_Ant retracted/Area Scan (7x10x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.09 mW/g M-ch_Ant retracted/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 28.2 V/m; Power Drift = -0.159 dB Peak SAR (extrapolated) = 2.95 W/kg SAR(1 g) = 1.19 mW/g; SAR(10 g) = 0.513 mW/g Maximum value of SAR (measured) = 1.73 mW/g 0 dB = 1.73mW/g

Date/Time: 12/9/2010 1:10:56 PM Test Laboratory: Compliance Certification Services CDMA2000 PCS_Secondary Landscape DUT: Fujitsu-Australia; Type: NA; Serial: NA Communication System: CDMA PCS Band; Frequency: 1851.25 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 1851.25 MHz; σ = 1.42 mho/m; εr = 52.7; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.04, 8.04, 8.04); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 H-ch_Ant retracted/Area Scan (7x10x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.11 mW/g H-ch_Ant retracted/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 28.6 V/m; Power Drift = -0.142 dB Peak SAR (extrapolated) = 2.96 W/kg SAR(1 g) = 1.26 mW/g; SAR(10 g) = 0.542 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.74 mW/g 0 dB = 1.74mW/g

Date/Time: 12/9/2010 1:34:41 PM Test Laboratory: Compliance Certification Services CDMA2000 PCS_Secondary Landscape DUT: Fujitsu-Australia; Type: NA; Serial: NA Communication System: CDMA PCS Band; Frequency: 1851.25 MHz;Duty Cycle: 1:1 H-ch_Ant retracted/Z Scan (1x1x29): Measurement grid: dx=20mm, dy=20mm, dz=3.5mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.78 mW/g

Date/Time: 12/9/2010 4:38:50 PM Test Laboratory: Compliance Certification Services CDMA2000 PCS_Primary Portrait DUT: Fujitsu-Australia; Type: NA; Serial: NA Communication System: CDMA PCS Band; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.46 mho/m; εr = 52.6; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.04, 8.04, 8.04); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 M-ch_Ant retracted/Area Scan (7x11x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.079 mW/g M-ch_Ant retracted/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 7.56 V/m; Power Drift = -0.191 dB Peak SAR (extrapolated) = 0.159 W/kg SAR(1 g) = 0.074 mW/g; SAR(10 g) = 0.039 mW/g Maximum value of SAR (measured) = 0.093 mW/g 0 dB = 0.093mW/g

Date/Time: 12/9/2010 2:12:21 PM Test Laboratory: Compliance Certification Services CDMA2000 PCS_Primary Portrait DUT: Fujitsu-Australia; Type: NA; Serial: NA Communication System: CDMA PCS Band; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.46 mho/m; εr = 52.6; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.04, 8.04, 8.04); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 M-ch_Ant extended/Area Scan (9x11x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.478 mW/g M-ch_Ant extended/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 18.2 V/m; Power Drift = 0.151 dB Peak SAR (extrapolated) = 0.843 W/kg SAR(1 g) = 0.436 mW/g; SAR(10 g) = 0.250 mW/g Maximum value of SAR (measured) = 0.537 mW/g 0 dB = 0.537mW/g


Document Created: 2010-12-09 17:47:36
Document Modified: 2010-12-09 17:47:36
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC