SAR Plots 22H

FCC ID: N7NGOBI2

RF Exposure Info

Download: PDF
FCCID_1399008

Date/Time: 12/10/2010 11:33:08 AM Test Laboratory: Compliance Certification Services Cellular 850_Bottom face DUT: Fujitsu-Australia; Type: NA; Serial: NA Communication System: CDMA Cell Band; Frequency: 836.52 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 836.52 MHz; σ = 0.985 mho/m; εr = 54.7; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(10.18, 10.18, 10.18); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: SAM 2 (Twin); Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 M-ch_Ant retracted/Area Scan (9x11x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.006 mW/g M-ch_Ant retracted/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 2.40 V/m; Power Drift = 0.043 dB Peak SAR (extrapolated) = 0.009 W/kg SAR(1 g) = 0.00587 mW/g; SAR(10 g) = 0.00485 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.007 mW/g 0 dB = 0.007mW/g

Date/Time: 12/10/2010 12:41:35 PM Test Laboratory: Compliance Certification Services Cellular 850_Bottom face DUT: Fujitsu-Australia; Type: NA; Serial: NA Communication System: CDMA Cell Band; Frequency: 836.52 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 836.52 MHz; σ = 0.985 mho/m; εr = 54.7; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(10.18, 10.18, 10.18); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: SAM 2 (Twin); Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 M-ch_Ant extended/Area Scan (9x11x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.468 mW/g M-ch_Ant extended/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 22.2 V/m; Power Drift = -0.217 dB Peak SAR (extrapolated) = 0.607 W/kg SAR(1 g) = 0.423 mW/g; SAR(10 g) = 0.303 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.483 mW/g 0 dB = 0.483mW/g

Date/Time: 12/10/2010 1:06:00 PM Test Laboratory: Compliance Certification Services Cellular 850_Bottom face DUT: Fujitsu-Australia; Type: NA; Serial: NA Communication System: CDMA Cell Band; Frequency: 836.52 MHz;Duty Cycle: 1:1 M-ch_Ant extended/Z Scan (1x1x29): Measurement grid: dx=20mm, dy=20mm, dz=3.5mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.480 mW/g

Date/Time: 12/10/2010 9:15:25 AM Test Laboratory: Compliance Certification Services Cellular 850_Secondary Landscape DUT: Fujitsu-Australia; Type: NA; Serial: NA Communication System: CDMA Cell Band; Frequency: 836.52 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 836.52 MHz; σ = 0.985 mho/m; εr = 54.7; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(10.18, 10.18, 10.18); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: SAM 2 (Twin); Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 M-ch_Ant retracted/Area Scan (7x9x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.329 mW/g M-ch_Ant retracted/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 18.2 V/m; Power Drift = -0.108 dB Peak SAR (extrapolated) = 0.798 W/kg SAR(1 g) = 0.303 mW/g; SAR(10 g) = 0.153 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.418 mW/g 0 dB = 0.418mW/g

Date/Time: 12/10/2010 10:03:01 AM Test Laboratory: Compliance Certification Services Cellular 850_Primary Portrait DUT: Fujitsu-Australia; Type: NA; Serial: NA Communication System: CDMA Cell Band; Frequency: 836.52 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 836.52 MHz; σ = 0.985 mho/m; εr = 54.7; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(10.18, 10.18, 10.18); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: SAM 2 (Twin); Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 M-ch_Ant retracted/Area Scan (9x9x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.009 mW/g M-ch_Ant retracted/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 2.96 V/m; Power Drift = -0.186 dB Peak SAR (extrapolated) = 0.020 W/kg SAR(1 g) = 0.00863 mW/g; SAR(10 g) = 0.00511 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.011 mW/g 0 dB = 0.011mW/g

Date/Time: 12/10/2010 10:33:50 AM Test Laboratory: Compliance Certification Services Cellular 850_Primary Portrait DUT: Fujitsu-Australia; Type: NA; Serial: NA Communication System: CDMA Cell Band; Frequency: 836.52 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 836.52 MHz; σ = 0.985 mho/m; εr = 54.7; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(10.18, 10.18, 10.18); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: SAM 2 (Twin); Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 M-ch_Ant extented/Area Scan (9x9x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.305 mW/g M-ch_Ant extented/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 17.8 V/m; Power Drift = -0.169 dB Peak SAR (extrapolated) = 0.577 W/kg SAR(1 g) = 0.292 mW/g; SAR(10 g) = 0.182 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.354 mW/g 0 dB = 0.354mW/g


Document Created: 2010-12-18 17:30:55
Document Modified: 2010-12-18 17:30:55
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC