SAR attachment 1-6

FCC ID: N7NGOBI2

RF Exposure Info

Download: PDF
FCCID_1367856

Date/Time: 9/14/2010 10:02:32 AM Test Laboratory: Compliance Certification Services PCS 1900_Laptop Mode DUT: Fujitsu-Australia; Type: NA; Serial: NA Communication System: CDMA PCS Band; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.48 mho/m; εr = 52.5; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.04, 8.04, 8.04); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 M-ch_Ant retracted/Area Scan (14x14x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.021 mW/g M-ch_Ant retracted/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 3.73 V/m; Power Drift = -0.206 dB Peak SAR (extrapolated) = 0.026 W/kg SAR(1 g) = 0.020 mW/g; SAR(10 g) = 0.018 mW/g

Date/Time: 9/14/2010 11:29:50 AM Test Laboratory: Compliance Certification Services PCS 1900_Laptop Mode DUT: Fujitsu-Australia; Type: NA; Serial: NA Communication System: CDMA PCS Band; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.48 mho/m; εr = 52.5; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.04, 8.04, 8.04); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 M-ch_Ant extended/Area Scan (14x14x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.044 mW/g M-ch_Ant extended/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 5.47 V/m; Power Drift = -0.159 dB Peak SAR (extrapolated) = 0.055 W/kg SAR(1 g) = 0.037 mW/g; SAR(10 g) = 0.027 mW/g Maximum value of SAR (measured) = 0.043 mW/g

Date/Time: 9/14/2010 12:21:23 PM Test Laboratory: Compliance Certification Services PCS 1900_Bottom face DUT: Fujitsu-Australia; Type: NA; Serial: NA Communication System: CDMA PCS Band; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.48 mho/m; εr = 52.5; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.04, 8.04, 8.04); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 M-ch_Ant retracted/Area Scan (11x11x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.037 mW/g M-ch_Ant retracted/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 4.95 V/m; Power Drift = 0.129 dB Peak SAR (extrapolated) = 0.078 W/kg SAR(1 g) = 0.039 mW/g; SAR(10 g) = 0.026 mW/g Maximum value of SAR (measured) = 0.046 mW/g M-ch_Ant retracted/Zoom Scan (7x7x9)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 4.95 V/m; Power Drift = 0.129 dB Peak SAR (extrapolated) = 0.045 W/kg SAR(1 g) = 0.034 mW/g; SAR(10 g) = 0.026 mW/g Maximum value of SAR (measured) = 0.039 mW/g

Date/Time: 9/14/2010 1:05:10 PM Test Laboratory: Compliance Certification Services PCS 1900_Bottom face DUT: Fujitsu-Australia; Type: NA; Serial: NA Communication System: CDMA PCS Band; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.48 mho/m; εr = 52.5; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.04, 8.04, 8.04); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 M-ch_Ant extended/Area Scan (9x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.239 mW/g M-ch_Ant extended/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 12.6 V/m; Power Drift = -0.215 dB Peak SAR (extrapolated) = 0.308 W/kg SAR(1 g) = 0.202 mW/g; SAR(10 g) = 0.132 mW/g

Date/Time: 9/13/2010 4:26:37 PM Test Laboratory: Compliance Certification Services PCS 1900_Secondary Landscape DUT: Fujitsu-Australia; Type: NA; Serial: NA Communication System: CDMA PCS Band; Frequency: 1908.75 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 1908.75 MHz; σ = 1.52 mho/m; εr = 52.5; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.04, 8.04, 8.04); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 L-ch_Ant retracted/Area Scan (8x9x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.555 mW/g L-ch_Ant retracted/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 19.4 V/m; Power Drift = -0.172 dB Peak SAR (extrapolated) = 1.50 W/kg SAR(1 g) = 0.581 mW/g; SAR(10 g) = 0.236 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.779 mW/g

Date/Time: 9/13/2010 3:29:15 PM Test Laboratory: Compliance Certification Services PCS 1900_Secondary Landscape DUT: Fujitsu-Australia; Type: NA; Serial: NA Communication System: CDMA PCS Band; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.48 mho/m; εr = 52.7; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.04, 8.04, 8.04); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 M-ch_Ant retracted/Area Scan (8x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.565 mW/g M-ch_Ant retracted/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 20.0 V/m; Power Drift = -0.101 dB Peak SAR (extrapolated) = 1.64 W/kg SAR(1 g) = 0.648 mW/g; SAR(10 g) = 0.257 mW/g Maximum value of SAR (measured) = 0.839 mW/g

Date/Time: 9/13/2010 3:54:24 PM Test Laboratory: Compliance Certification Services PCS 1900_Secondary Landscape DUT: Fujitsu-Australia; Type: NA; Serial: NA Communication System: CDMA PCS Band; Frequency: 1908.75 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 1908.75 MHz; σ = 1.52 mho/m; εr = 52.5; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.04, 8.04, 8.04); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 H-ch_Ant retracted/Area Scan (8x9x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.796 mW/g H-ch_Ant retracted/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 23.3 V/m; Power Drift = -0.028 dB Peak SAR (extrapolated) = 2.16 W/kg SAR(1 g) = 0.901 mW/g; SAR(10 g) = 0.356 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.27 mW/g

Date/Time: 9/13/2010 4:24:44 PM Test Laboratory: Compliance Certification Services PCS 1900_Secondary Landscape DUT: Fujitsu-Australia; Type: NA; Serial: NA Communication System: CDMA PCS Band; Frequency: 1908.75 MHz;Duty Cycle: 1:1 H-ch_Ant retracted/Z Scan (1x1x29): Measurement grid: dx=20mm, dy=20mm, dz=3.5mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.23 mW/g

Date/Time: 9/13/2010 5:05:56 PM Test Laboratory: Compliance Certification Services PCS 1900_Secondary Landscape DUT: Fujitsu-Australia; Type: NA; Serial: NA Communication System: CDMA PCS Band; Frequency: 1908.75 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 1908.75 MHz; σ = 1.52 mho/m; εr = 52.5; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.04, 8.04, 8.04); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 H-ch_Ant retracted/Area Scan (8x9x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.824 mW/g H-ch_Ant retracted/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 23.8 V/m; Power Drift = -0.099 dB Peak SAR (extrapolated) = 2.11 W/kg SAR(1 g) = 0.870 mW/g; SAR(10 g) = 0.345 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.15 mW/g 0 dB = 1.15mW/g

Date/Time: 9/14/2010 8:46:30 AM Test Laboratory: Compliance Certification Services PCS 1900_Primary Portrait DUT: Fujitsu-Australia; Type: NA; Serial: NA Communication System: CDMA PCS Band; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.48 mho/m; εr = 52.5; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.04, 8.04, 8.04); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 M-ch_Ant retracted/Area Scan (8x8x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.198 mW/g M-ch_Ant retracted/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 11.8 V/m; Power Drift = 0.220 dB Peak SAR (extrapolated) = 0.350 W/kg SAR(1 g) = 0.186 mW/g; SAR(10 g) = 0.100 mW/g Maximum value of SAR (measured) = 0.234 mW/g

Date/Time: 9/14/2010 9:08:29 AM Test Laboratory: Compliance Certification Services PCS 1900_Primary Portrait DUT: Fujitsu-Australia; Type: NA; Serial: NA Communication System: CDMA PCS Band; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.48 mho/m; εr = 52.5; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.04, 8.04, 8.04); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 M-ch_Ant extended/Area Scan (8x8x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.764 mW/g M-ch_Ant extended/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 22.7 V/m; Power Drift = 0.209 dB Peak SAR (extrapolated) = 1.23 W/kg SAR(1 g) = 0.675 mW/g; SAR(10 g) = 0.377 mW/g Maximum value of SAR (measured) = 0.850 mW/g


Document Created: 2010-09-16 17:01:40
Document Modified: 2010-09-16 17:01:40
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC