SAR attachment 1-4

FCC ID: N7NGOBI2

RF Exposure Info

Download: PDF
FCCID_1367853

Date/Time: 9/13/2010 12:03:17 PM Test Laboratory: Compliance Certification Services UMTS band II_Laptop Mode DUT: Fujitsu-Australia; Type: NA; Serial: NA Communication System: UMTS Band II; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.48 mho/m; εr = 52.7; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.04, 8.04, 8.04); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 M-ch_ Ant retracted/Area Scan (14x14x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.019 mW/g M-ch_ Ant retracted/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 3.44 V/m; Power Drift = -0.077 dB Peak SAR (extrapolated) = 0.030 W/kg SAR(1 g) = 0.018 mW/g; SAR(10 g) = 0.017 mW/g Maximum value of SAR (measured) = 0.020 mW/g

Date/Time: 9/13/2010 12:55:15 PM Test Laboratory: Compliance Certification Services UMTS band II_Laptop Mode DUT: Fujitsu-Australia; Type: NA; Serial: NA Communication System: UMTS Band II; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.48 mho/m; εr = 52.7; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.04, 8.04, 8.04); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 M-ch_Ant extended/Area Scan (14x14x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.026 mW/g M-ch_Ant extended/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 4.29 V/m; Power Drift = -0.090 dB Peak SAR (extrapolated) = 0.033 W/kg SAR(1 g) = 0.025 mW/g; SAR(10 g) = 0.023 mW/g Maximum value of SAR (measured) = 0.027 mW/g

Date/Time: 9/12/2010 9:08:49 PM Test Laboratory: Compliance Certification Services UMTS band II_Bottom face DUT: Fujitsu-Australia; Type: NA; Serial: NA Communication System: UMTS Band II; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.48 mho/m; εr = 53.8; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.04, 8.04, 8.04); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 M-ch_Ant retracted/Area Scan (9x8x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.025 mW/g M-ch_Ant retracted/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 4.18 V/m; Power Drift = -0.111 dB Peak SAR (extrapolated) = 0.040 W/kg SAR(1 g) = 0.025 mW/g; SAR(10 g) = 0.021 mW/g Maximum value of SAR (measured) = 0.031 mW/g M-ch_Ant retracted/Zoom Scan (7x7x9)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 4.18 V/m; Power Drift = -0.111 dB Peak SAR (extrapolated) = 0.078 W/kg SAR(1 g) = 0.013 mW/g; SAR(10 g) = 0.00509 mW/g Maximum value of SAR (measured) = 0.039 mW/g

Date/Time: 9/12/2010 5:45:43 PM Test Laboratory: Compliance Certification Services UMTS band II_Bottom face DUT: Fujitsu-Australia; Type: NA; Serial: NA Communication System: UMTS Band II; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.48 mho/m; εr = 53.8; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.04, 8.04, 8.04); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 M-ch_Ant extended/Area Scan (9x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.159 mW/g M-ch_Ant extended/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 10.1 V/m; Power Drift = 0.049 dB Peak SAR (extrapolated) = 0.209 W/kg SAR(1 g) = 0.141 mW/g; SAR(10 g) = 0.097 mW/g Maximum value of SAR (measured) = 0.166 mW/g

Date/Time: 9/12/2010 11:52:15 AM Test Laboratory: Compliance Certification Services UMTS Bnad II_Secondary Landscape DUT: Fujitsu-Australia; Type: NA; Serial: NA Communication System: UMTS Band II; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.48 mho/m; εr = 53.8; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.04, 8.04, 8.04); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 M-ch_Ant retracted/Area Scan (8x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.494 mW/g M-ch_Ant retracted/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 18.4 V/m; Power Drift = -0.177 dB Peak SAR (extrapolated) = 1.05 W/kg SAR(1 g) = 0.419 mW/g; SAR(10 g) = 0.168 mW/g Maximum value of SAR (measured) = 0.566 mW/g

Date/Time: 9/12/2010 12:14:26 PM Test Laboratory: Compliance Certification Services UMTS Bnad II_Secondary Landscape DUT: Fujitsu-Australia; Type: NA; Serial: NA Communication System: UMTS Band II; Frequency: 1880 MHz;Duty Cycle: 1:1 M-ch_Ant retracted/Z Scan (1x1x29): Measurement grid: dx=20mm, dy=20mm, dz=3.5mm Maximum value of SAR (measured) = 0.556 mW/g

Date/Time: 9/12/2010 4:20:08 PM Test Laboratory: Compliance Certification Services UMTS band II_Primary Portrait DUT: Fujitsu-Australia; Type: NA; Serial: NA Communication System: UMTS Band II; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.48 mho/m; εr = 53.8; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.04, 8.04, 8.04); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 M-ch_Ant retracted/Area Scan (8x8x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.049 mW/g M-ch_Ant retracted/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 5.76 V/m; Power Drift = 0.013 dB Peak SAR (extrapolated) = 0.077 W/kg SAR(1 g) = 0.041 mW/g; SAR(10 g) = 0.022 mW/g Maximum value of SAR (measured) = 0.052 mW/g

Date/Time: 9/12/2010 3:57:16 PM Test Laboratory: Compliance Certification Services UMTS band II_Primary Portrait DUT: Fujitsu-Australia; Type: NA; Serial: NA Communication System: UMTS Band II; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.48 mho/m; εr = 53.8; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.04, 8.04, 8.04); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 M-ch_Ant extended/Area Scan (8x8x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.457 mW/g M-ch_Ant extended/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 17.3 V/m; Power Drift = -0.204 dB Peak SAR (extrapolated) = 0.629 W/kg SAR(1 g) = 0.351 mW/g; SAR(10 g) = 0.197 mW/g Maximum value of SAR (measured) = 0.437 mW/g


Document Created: 2010-09-14 08:15:13
Document Modified: 2010-09-14 08:15:13
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC