SAR attachment 1-2

FCC ID: N7NGOBI2

RF Exposure Info

Download: PDF
FCCID_1367851

Date/Time: 9/13/2010 2:04:12 PM Test Laboratory: Compliance Certification Services PCS 1900_Laptop Mode DUT: Fujitsu-Australia; Type: NA; Serial: NA Communication System: PCS1900; Frequency: 1880 MHz;Duty Cycle: 1:4 Medium parameters used: f = 1880 MHz; σ = 1.48 mho/m; εr = 52.7; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.04, 8.04, 8.04); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 2 slot_M-ch_Ant retracted/Area Scan (14x14x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.021 mW/g 2 slot_M-ch_Ant retracted/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 3.40 V/m; Power Drift = 0.155 dB Peak SAR (extrapolated) = 0.024 W/kg SAR(1 g) = 0.018 mW/g; SAR(10 g) = 0.018 mW/g

Date/Time: 9/13/2010 1:30:30 PM Test Laboratory: Compliance Certification Services PCS 1900_Laptop Mode DUT: Fujitsu-Australia; Type: NA; Serial: NA Communication System: PCS1900; Frequency: 1880 MHz;Duty Cycle: 1:4 Medium parameters used: f = 1880 MHz; σ = 1.48 mho/m; εr = 52.7; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.04, 8.04, 8.04); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 2 slot_M-ch_ Ant extended/Area Scan (14x14x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.028 mW/g 2 slot_M-ch_ Ant extended/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 4.24 V/m; Power Drift = 0.144 dB Peak SAR (extrapolated) = 0.032 W/kg SAR(1 g) = 0.026 mW/g; SAR(10 g) = 0.023 mW/g

Date/Time: 9/12/2010 7:03:17 PM Test Laboratory: Compliance Certification Services PCS 1900_Bottom face DUT: Fujitsu-Australia; Type: NA; Serial: NA Communication System: PCS1900; Frequency: 1880 MHz;Duty Cycle: 1:4 Medium parameters used: f = 1880 MHz; σ = 1.48 mho/m; εr = 53.8; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.04, 8.04, 8.04); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 2 slot_M-ch_Ant retracted/Area Scan (9x8x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.028 mW/g 2 slot_M-ch_Ant retracted/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 4.45 V/m; Power Drift = -0.12 dB Peak SAR (extrapolated) = 0.048 W/kg SAR(1 g) = 0.028 mW/g; SAR(10 g) = 0.023 mW/g Maximum value of SAR (measured) = 0.031 mW/g 2 slot_M-ch_Ant retracted/Zoom Scan (7x7x9)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 4.45 V/m; Power Drift = -0.12 dB Peak SAR (extrapolated) = 0.038 W/kg SAR(1 g) = 0.028 mW/g; SAR(10 g) = 0.022 mW/g Maximum value of SAR (measured) = 0.034 mW/g

Date/Time: 9/12/2010 6:38:57 PM Test Laboratory: Compliance Certification Services PCS 1900_Bottom face DUT: Fujitsu-Australia; Type: NA; Serial: NA Communication System: PCS1900; Frequency: 1880 MHz;Duty Cycle: 1:4 Medium parameters used: f = 1880 MHz; σ = 1.48 mho/m; εr = 53.8; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.04, 8.04, 8.04); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 2 slot_M-ch_Ant extended/Area Scan (9x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.148 mW/g 2 slot_M-ch_Ant extended/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 10.2 V/m; Power Drift = 0.129 dB Peak SAR (extrapolated) = 0.209 W/kg SAR(1 g) = 0.144 mW/g; SAR(10 g) = 0.100 mW/g Maximum value of SAR (measured) = 0.165 mW/g

Date/Time: 9/12/2010 12:22:47 PM Test Laboratory: Compliance Certification Services PCS 1900_Secondary Landscape DUT: Fujitsu-Australia; Type: NA; Serial: NA Communication System: PCS1900; Frequency: 1880 MHz;Duty Cycle: 1:4 Medium parameters used: f = 1880 MHz; σ = 1.48 mho/m; εr = 53.8; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.04, 8.04, 8.04); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 2 slot_M-ch_Ant retracted/Area Scan (8x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.658 mW/g 2 slot_M-ch_Ant retracted/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 21.3 V/m; Power Drift = -0.161 dB Peak SAR (extrapolated) = 1.34 W/kg SAR(1 g) = 0.548 mW/g; SAR(10 g) = 0.219 mW/g Maximum value of SAR (measured) = 0.747 mW/g

Date/Time: 9/12/2010 1:25:22 PM Test Laboratory: Compliance Certification Services PCS 1900_Secondary Landscape DUT: Fujitsu-Australia; Type: NA; Serial: NA Communication System: PCS1900; Frequency: 1880 MHz;Duty Cycle: 1:4 2 slot_M-ch_Ant retracted/Z Scan (1x1x29): Measurement grid: dx=20mm, dy=20mm, dz=3.5mm Maximum value of SAR (measured) = 0.751 mW/g

Date/Time: 9/12/2010 2:48:46 PM Test Laboratory: Compliance Certification Services PCS 1900_Primary Portrait DUT: Fujitsu-Australia; Type: NA; Serial: NA Communication System: PCS1900; Frequency: 1880 MHz;Duty Cycle: 1:4 Medium parameters used: f = 1880 MHz; σ = 1.48 mho/m; εr = 53.8; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.04, 8.04, 8.04); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 2 slot_M-ch_Ant retracted/Area Scan (8x8x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.073 mW/g 2 slot_M-ch_Ant retracted/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 6.98 V/m; Power Drift = 0.204 dB Peak SAR (extrapolated) = 0.111 W/kg SAR(1 g) = 0.062 mW/g; SAR(10 g) = 0.033 mW/g Maximum value of SAR (measured) = 0.077 mW/g

Date/Time: 9/12/2010 3:24:51 PM Test Laboratory: Compliance Certification Services PCS 1900_Primary Portrait DUT: Fujitsu-Australia; Type: NA; Serial: NA Communication System: PCS1900; Frequency: 1880 MHz;Duty Cycle: 1:4 Medium parameters used: f = 1880 MHz; σ = 1.48 mho/m; εr = 53.8; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.04, 8.04, 8.04); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 2 slot_M-ch_Ant extended/Area Scan (8x8x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.477 mW/g 2 slot_M-ch_Ant extended/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 17.9 V/m; Power Drift = 0.124 dB Peak SAR (extrapolated) = 0.713 W/kg SAR(1 g) = 0.397 mW/g; SAR(10 g) = 0.221 mW/g Maximum value of SAR (measured) = 0.492 mW/g


Document Created: 2010-09-14 08:14:24
Document Modified: 2010-09-14 08:14:24
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC