SAR Test report Appendix C Part 1

FCC ID: N7NEM7455

RF Exposure Info

Download: PDF
FCCID_3899268

Calibration Laboratory of s Schweizerischer Kalibrierdienst Schmid & Partner Service suisse d‘étaionnage Engineering AG Servizio svizzero dtaratura Zeughausstrasse 43, 8004 Zurich, Switzerland s /Falitabs S swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Ctient BTL—CN (Auden) Certificate No: D750V3—1095_Sep15 CALIBRATION CERTIFICATE | Object D750V3 — SN: 1095 | Calibration procedure(s) QA CAL—05.v9 Calibration procedure for dipole validation kits above 700 MHz Calibration date September 30, 2015 | | This calibration certificate documents the traceabilty to national standards, which realze the physical units of measurements (S1) | The measurements and the uncertainties with confidence probabilty are given on the following pages andare part of the certificate ‘ All calibrations have been conducted in the closed laboratory faciity: environment temperature (22 = 3)°C and humidity < 70% | Calibration Equipment used (M&TE critical for calibration) | Primary Standards _____Jipw Cal Date (Certficate No.) — _ ScheduledCalibration | Power meter EPM—442A aBa74so704 07—Oct—14 (No. 217—02020) Oct—15 Power sensor HP 8481A ussras27es 07—Oct—14 (No. 217—02020) Oct—15 Power sensor HP 8481A MY41092317 07—Oct—14 (No. 217—02021) Oct—15 Reference 20 dB Aftenuator SN: 5058 (20k) Of—Apr—15 (No. 217—02131) Mar—16 Type—N mismatch combination SN: 5047.2 / 06827 Ot—Apr—15 (No. 217—02134) Mar—16 | Reterence Probe EX3DV4 SN: 7349 30—Dec—14 (No. EX3—7349_Dect4) Dec—15 ‘ Daed | SN so1 17—Aug—15 (No. DAE4—601_Aug15) Aug—16 | Secondary Standards 19 # Check Date (inhouse) _ _ ScheduledCheck _ ‘ RF generator R&S SMT—06 100972 15—Jun—15 (in house check Jun—15) in house check Jun—18 Network Analyzer HP 8753E U$37390585 84206 18—Oct—01 (in house check Oct—14) in house check: Oct—15 Name Function Signature Calibratedby Leif Klysner Laboratory Technician gq/%‘fi | n | Approved by Katja Pokovie Technical Manager zPLZC | EL is Issued: October 1, 2015 | This calibrationcertificate shall not be reproduced except in full without written approval ofthe laboratory Certificate No: D750V3—1095_Sep15 Page 1 of 8

Calibration Laboratory of g Schweizerischer Kalibrierdienst Schmid & Partner _ Service suisse d‘étalonnage Engineering AG Servizio svizzero dtaratura Zeughausstrasse 43, 8004 Zurich, Switzerland S swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilatora! Agrooment for the recognition of calibration certificates Glossary: TSL tissue simulating liquid ConvF sensitivity in TSL / NORM x.y.z N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2013, "IEEE Recommended Practice for Determining the Peak Spatial— Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 b) IEC 62209—1, "Procedure to measure the Specific Absorption Rate (SAR) for hand—held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz)", February 2005 c) IEC 62209—2, "Procedure to determine the Specific Absorption Rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz)", March 2010 d) KDB 865664, "SAR Measurement Requirements for 100 MHz to 6 GHz" Additional Documentation: e) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: * Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. * Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented parallel to the body axis. * Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. * Electrical Delay: One—way delay between the SMA connector and the antenna feed point No uncertainty required. * SAR measured: SAR measured at the stated antenna input power. * SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. «_ SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. The reported uncertainty of measurementis stated as the standard uncertainty of measurement | multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probatbility of approximately 95%. Certificate No: D750V3—1095_Sep15 Page 2 of 8

Measurement Conditions DASY system configuration, as far as not given on page 1 DASY Version DASY5 V52.8.8 Extrapolation Advanced Extrapolation Phantom Modular Flat Phantom Distance Dipole Center — TSL 15 mm with Spacer 4 Zoom Scan Resolution dx, dy, dz =5 mm Frequency 750 MHz + 1 MHz Head TSL parameters The following parameters and calculations were applied Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 41.9 0.89 mho/m Measured Head TSL parameters (22.0 £0.2) °C 42.0 + 6 % 0.92 mho/m + 6 % Head TSL temperature change during test <0.5 °C SAR result with Head TSL SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 250 mW input power 2.12 Wikg SAR for nominal Head TSL parameters normalized to 1W 8.27 Wikg + 17.0 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 250 mW input power 1.38 Wikg SAR for nominal Head TSL parameters normalized to 1W 5.41 Wikg 2 16.5 % (k=2) Body TSL parameters The following parameters and calculations were applied Temperature Permittivity Conductivity —l Nominal Body TSL parameters 22.0 °C 55.5 0.96 mho/m Measured Body TSL parameters (22.0 2 0.2) °C 53.9 26 % 0.98 mho/m + 6 % Body TSL temperature change during test <0.5 °C SAR result with Body TSL SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 250 mW input power 2.21 Wikg SAR for nominal Body TSL parameters normalized to 1W 8.65 Wikg 2 17.0 % (k=2) SAR averaged over 10 m (10 g) of Body TSL condition SAR measured 250 mW input power 1.46 Wikg SAR for nominal Body TSL parameters normalized to 1W 5.74 Wikg 2 16.5 %(k=2) Certificate No: D750V3—1095_Sep15 Page 3 of 8

Appendix (Additional assessments outside the scope of SCS 0108) Antenna Parameters with Head TSL Impedance, transformedto feed point 53.8 0 — 0.3 i0 Return Loss —28.7 dB Antenna Parameters with Body TSL Impedance, transformed to feed point 48.9 0 — 2.4 jO Return Loss —31.5 dB General Antenna Parameters and Design Electrical Delay (one direction) 1.032 ns After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semirigid coaxia! cable. The center conductor of the feeding line is directly connected to the second arm of thedipole. The antennais therefore short—circuited for DC—signals. On some of the dipoles, small end caps are added to the dipole arms in order to improve matching when loaded according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still according to the Standard No excessiveforce must be applied to thedipole arms, because they might bend or the soldered connections near the feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Manufactured on April 11, 2013 Certificate No: D750V3—1095_Sep15 Page 4 of 8

DASY5 Validation Report for Head TSL Date: 17.09.2015 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 750 MHz; Type: D750V3; Serial: D750V3 — SN: 1095 Communication System: UID0 CW; Frequency: 750 MHz Medium parameters used: f= 750 MHz; 0 = 0.92 $/m; &, = 42; p = 1000 kg/m Phantom section: Flat Section Measurement Standard: DASYS5 (IEEE/IEC/ANSI C63.19—2011) DASY52 Configuration: * Probe: EX3DV4 SN7349; ConvF(10.1, 10.1, 10.1); Calibrated: 30.12.2014 «_ Sensor—Surface: 1.4mm (Mechanical Surface Detection) *« Electronics: DAE4 Sn601; Calibrated: 17.08.2015 * Phantom: Flat Phantom 4.9L; Type: QDOOOP49AA; Serial: 1001 + DASY32 52.8.8(1222); SEMCAD X 14.6.10(7331) Dipole Calibrationfor Head Tissue/Pin=250 mW, d=15mm/Zoom Scan(7x7x7)/Cube0: Measurement grid: dx=5mm, dy=5mm, dz=5mm ReferenceValue = 58.22 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 3.20 W/kg SAR(I g) = 2.12 W/kg; SAR(1O g) = 1.38 W/kg Maximum valueof SAR (measured) = 2.83 W/kg .60 12.00 0 dB = 2.83 W/kg = 4.52 dB W/ke Certificate No: D750V3—1095_Sep15 Page 5 of 8

Impedance Measurement Plot for Head TSL es saere —orm34 be i _ i 7 Y _ a H2 $11 LoG S de/REF —20 d 750.000 0o8 MHz bel _ foaaes d frg lE\‘ + : + 4 \. Hig 550,000 006 MHz ¢ L.oue Certificate No: D750V3—1095_Sep15 Page 6 of 8

DASYS5 Validation Report for Body TSL Date: 30.09.2015 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 750 MHz; Type: D750V3; Serial: D750V3 — SN: 1095 Communication System: UID 0 — CW; Frequency: 750 MHz Medium parameters used: f= 750 MHz: 0 = 0.98 $/m; &, = 53.9: p = 1000 kg/m Phantom section: Flat Section Measurement Standard: DASYS (IEEE/EC/ANSI C63.19—2011) DASY52 Configuration * Probe: EX3DV4 SN7349; ConvF(9.61, 9.61, 9.61); Calibrated: 30.12.2014: * Sensor—Surface: 1.4mm (Mechanical Surface Detection) + Electronics: DAE4 $n601; Calibrated: 17.08.2015 * Phantom: Flat Phantom 4.9L; Type: QDOOOP49AA; Serial: 1001 «+ DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Dipole Calibration for BodyTissue/Pin=250 mW, d=15mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=Smm, dz=5mm ReferenceValue = 57.71 V/m; Power Drift =0.01 dB Peak SAR (extrapolated) = 3.27 W/kg SAR(I g) =2.21 W/kg; SAR(10 g) = 1.46 W/kg Maximum valueof SAR (measured) 2.92 W/kg aB 10 | 2.20 —8.80 11.00 0 dB= 2.92 W/kg = 4.65 dBW/ke Certificate No: D750V3—1095_Sep15 Page of 8

Impedance Measurement Plot for Body TSL 30 Sep 2015 i 4 #. t nz si1 Los 5 dB/REF —20 ce 11—31.458 ae se.000 aso m be i —>—. Hia I I I { se.000 ea6 miz Certificate No: D OV3—1095_Sep15 Page 8 of 8

Dipole Internal Calibration Record NO.： Asset No.： E-429 Model No.： D750MHzV3 Cal. Date： 2015/9/30 Equipment： ENA Network Analyzer Serial No.： 1095 Next Cal. Date： 2018/9/30 Environmental condition： Temp： 23.3 ℃ R.H.： 53% Standard List IEEE Recommended Practice for Determining the Peak Spatial-Averaged Specific Absorpiton Rate(SAR) in the 1 IEEE Std 1528-2013 Human Head from Wireless Communication Devices: Measurement Texhniques, June 2013 Procedure to determine the Specific Absorption Rate (SAR) for wireless communication devices used in close 2 IEC 62209-2 proximity to the human body(frequency range of 30 MHz to 6 GHz), March 2010 3 KDB865664 SAR Measurement Requirements for 100 MHz to 6 GHz Equipment Information Equipment： Manufacturer： Model No.： Serial No.： Cal.Organization： Certificate No.： Cal. Date： ENA Network Agilent E5071C MY46102965 NA NA Mar. 27, 2016 Analyzer Calibration Value： For Head Tissue Frequency Item Original Cal. Result Verified on 2016/7/27 Deviation Result Annex Impedance, transformed to 53.8Ω-0.3jΩ 51.77Ω+1.02jΩ <5Ω Pass 750MHz feed point(Ω) Return Loss(dB) -28.7 -28.3 1% Pass For Body Tissue Frequency Item Original Cal. Result Verified on 2016/7/22 Deviation Impedance, transformed to 48.9Ω-2.4jΩ 49.01Ω-1.83jΩ <5Ω Pass 750MHz feed point Return Loss(dB) -31.5 -29.2 7% Pass Impedance Test- Head Return Loss-Head Impedance Test- Body Return Loss-Body From NO.：E_YYMMDD；E=Dipole NO. ,YYMMDD=Year/Month/Date。 FM-xxx-xx Ver.1.0

Calibration Laboratory of Schweizerischer Kalibrierdienst w o Schmid & Partner Service suisse d‘étalonnage Engineering AG Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is oneof the signatories to the EA Multilateral Agreementfor the recognition of calibration certificates Client BTL—CN (Auden) Certificate No: D835V2—4d160_Sep15 ICALIBRATION CERTIFICATE | Object D835V2 — SN: 40160 Calibration procedure(s) QA CAL—05.v9 Calibration procedure for dipole validation kits above 700 MHz Calibration date September 30, 2015 This calibration certificate documents the traceabilty to national standards, which realize the physical units of measurements (S1) The measurements and the uncertainties with confidence probabiliy are given on the following pages and are part of the certficate All calibrations have been conducted in the closed laboratory facifty: environment temperature (22 > 3)°C andhumidity < 70% Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date (Certficate No.) duled Calibration | Power meter EPM—442A GB37480704 07—Oct—14 (No. 217—02020) Oct—15 | Power sensor HP 8481A US37202783 07—Oct—14 (No. 217—02020) Oct—15 | Power sensor HP 8481A My41092317 07—Oct—14 (No. 217—02021) Oct—15 | Reference 20 dB Aftenuator SN: 5058 (20k) O1—Apr—15 (No. 217—02131) Mar—16 Type—N mismatch combination SN: 5047.2 / 06327 O1—Apr—15 (No. 217—02134) Mar—16 Reference Probe EX3DV4 SN: 7349 30—Dec—14 (No. EX3—7349_Dect4) Dec—15 Dacd SN: 601 17—Aug—15 (No. DAE—601. Aug15) Aug—16 Secondary Standards iD # Check Date (in house) _ScheduledCheck RF generator R&S SMT—06 100972 15—Jun—15 (in house check Jun—15) In house check: Jun—18 Network Analyzer HP 8753E | Us37390585 S4206 18—Oct—01 (in house check Oct—14) in house check: Oct—15 Name Function Signature 7. | Calibrated by Leif Kysner Laboratory Technician Approved by Katia Pokovie Technical Manager | issued: October 2, 2015 | | This calibration certificate shall not be reproduced except in full without written approval of the laboratory Certificate No: DBS5V2—40160_Sep15 Page 1 of 8

Calibration Laboratory of g Schweizerischer Kalibrierdienst Schmid & Partner g Service suisse d‘étalonnage Engineering AG Servizio svizzero d taratura Zeughausstrasse 43, 8004 Zurich, Switzerland S swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreementfor the recognition of calibration certificates Glossary: TSL tissue simulating liquid ConvF sensitivity in TSL / NORM x,y,z N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2013, "IEEE Recommended Practice for Determining the Peak Spatial— Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 b) IEC 62209—1, "Procedure to measure the Specific Absorption Rate (SAR) for hand—held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz)®, February 2005 c) IEC 62209—2, "Procedure to determine the Specific Absorption Rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz)", March 2010 d) KDB 865664, "SAR Measurement Requirements for 100 MHz to 6 GHz" Additional Documentation: e) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: * Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. * Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented parallel to the body axis. * Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. * Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. * SAR measured: SAR measured at the stated antenna input power. «_ SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. «_ SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. The reported uncertainty of measurementis stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probatbility of approximately 95%. Certificate No: DB35V2—40160_Sep15 Page 2 of 8

Measurement Conditions DASY system configuration, as far as not given onpage 1 DASY Version DASY5 V52..8 Extrapolation Advanced Extrapolation Phantom Modular Flat Phantom Distance Dipole Center— TSL 15 mm with Spacer Zoom Scan Resolution dx, dy, dz =5 mm Frequency 835 MHz a 1 MHz i Head TSL parameters The following parameters and calculations were applied Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 41.5 0.90 mho/m Measured Head TSL parameters (22.0 £ 0.2) °C 41.8 x 6 % 0.94 mho/m + 6 % Head TSL temperature change during test <0.5 °C SAR result with Head TSL SAR averaged over 1 cm‘ (1 g) of Head TSL Condition SAR measured 250 mW input power 2.45 Wikg SAR for nominal Head TSL parameters normalized to 1W 9.50 Wikg + 17.0 % (k=2) SAR averaged over 10 cm‘ (10 g) of Head TSL condition SAR measured 250 mW input power 1.58 Wikg SAR for nominal Head TSL parameters normalized to 1W 6.17 Wikg 2 16.5 % (k=2) Body TSL parameters The following parameters and calculations were applied Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 55.2 0.97 mho/m Measured Body TSL parameters (22.0 2 0.2) °C 58.8 16 % 1.00 mho/m x 6 % Body TSL temperature change during test <0.5 °C SAR result with Body TSL SAR averaged over 1 cm‘ (1 g) of Body TSL Condition SAR measured 250 mW input power 2.45 Wikg SAR for nominal Body TSL parameters normalized to 1W 9.52 Wikg x 17.0 % (k=2) SAR averaged over 10 cm‘ (10 g) of Body TSL condition SAR measured 250 mW input power 1.59 Wikg SAR for nominal Body TSL parameters normalized to 1W 6.22 Wikg x 16.5 %(k=2) Certificate No: D835V2—40160_Sep15 Page 3 of 8

Appendix (Additional assessments outside the scope of SCS 0108) Antenna Parameters with Head TSL Impedance, transformed to feed point 51.6 2 — 3.1 jQ Return Loss —29.3 dB Antenna Parameters with Body TSL Impedance, transformed to feed point 47.2 0 — 5.0 t Return Loss —24.7 dB General Antenna Parameters and Design Electrical Delay (one direction) 1.442 ns After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short—circuited for DC—signals. On some of the dipoles, small end caps are added to the dipole arms in order to improve matching when loaded according to the position as explained in the *Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still according to the Standard No excessive force must be applied to thedipole arms, because they might bend or the soldered connections near the feedpoint may be damaged Additional EUT Data Manufactured by SPEAG Manufactured on December 28, 2012 Certificate No: DB35V2—4d160_Sep15 Page 4 of 8

DASY5 Validation Report for Head TSL Date: 17.09.2015 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 835 MHz; Type: D835V2; Serial: D835V2 — SN: 40160 Communication System: UID 0 — CW; Frequency: 835 MHz Medium parameters used: 1 = 835 MHz; 0 = 0.94 $/m; &, =41.8; p = 1000 kg/m Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19—2011) DASY52 Configuration * Probe: EX3DV4 SN7349; ConyF(9.77, 9.77, 9.77); Calibrated: 30.12.2014 * Sensor—Surface: 1.4mm (Mechanical Surface Detection) *« Electronics: DAE4 S$n601; Calibrated: 17.08.2015 * Phantom: Flat Phantom 4.9L; Type: QDOOOP49AA; Serial: 1001 + DASY32 52.8.8(1222); SEMCAD X 14.6.10(7331) Dipole Calibration for Head Tissue/Pin=250 mW, d=15mm/Zoom Scan(7x7x7)/Cube0: Measurement grid: dx=5mm, dy=3mm, dz=5mm ReferenceValue = 61.89 V/m; Power Drift =—0.01 dB Peak SAR (extrapolated) = 3.77 W/kg SAR(I g) = 2.45 W/kg:; SAR(10 g) = 1.58 W/kg Maximum valueof SAR (measured) =3.31 W/kg «n o «.60 12.00 0 dB =3.31 W/kg = 5.20 dBW/kg Certificate No: DB35V2—4d160_Sep15 Page 5 of 8

Impedance Measurement Plot for Head TSL CHD si u re 2 S1.645 a s.er0 non fH + a ts C & + + ? y o#— | i © ¢ m a Avg 16° + | age..w——— + 4 ; 1 | : i i ; . + 4 + + wia o + 4 + 1 . + + . + s T stor 1 035.000 an0 MHz Certificate No: DB35V2—40160_Sep15 Page 6 of 8

DASY5 Validation Report for Body TSL Date: 30.09.2015 Test Laboratory: SPEAG, Zurich, Switzerland DU" Dipole 835 MHz; Type: D835V2; Serial: D835V2 — SN: 40160 Communication System: UID 0 CW; Frequency: 835 MHz Medium parameters used: f = 835 MHz: 0 = 1 S/m; &, = 53.8; p = 1000 kg/m Phantom section: Flat Section Measurement Standard: DASYS5 (IEEE/IEC/ANSI €63.19—2011) DASY52 Configuration * Probe: EX3DV4 SN7349; ConvF(9.72, 9.72, 9.72); Calibrated: 30.12.2014 «_ Sensor—Surface: 1.4mm (Mechanical Surface Detection) * Electronics: DAE4 Sn601; Calibrated: 17.08.2015 * Phantom: Flat Phantom 4.9L; Type: QDOOOP49AA; Serial: 1001 «_ DASY32 52.8.8(1222); SEMCAD X 14.6.10(7331) Dipole Calibration for Body Tissue/Pin=250 mW, d=1Smm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value 59.47 V/m; Power Drift = 0.06 dB Peak SAR (extrapolated) = 3.78 W/kg SAR(I g) = 2.45 W/kg; SAR(IO g) = 1.59 W/kg Maximum value of SAR (measured) = 3.30 W/kg —2.40 —4.80 —1.20 —8.60 12.00 0 dB = 3.30 W/kg = 5.19 dBW/ke Certificate No: D835 2—40160_Sep15 Page 7 of 8

Impedance Measurement Plot for Body TSL 3 . a is **~A e 1 7 S »! | i Hia Los _5 de/Rgr —20 de l 1—24.559 a8 te1 t it | ca / | | 4 + L4 y 4 + 4 y 7 # . + e } ¥——4—L ; + 4 t iva | Te flceho mand M } . 4 | + + + + U + OHI + + + 4 C ma | + 1 L } . 1 ; 1 4 hat — — — sTop 1 635.000 aod Hiz Certificate No: DB35V2—40160_Sep15 Page 8 of 8

Dipole Internal Calibration Record NO.： Asset No.： E-437 Model No.： D835MHzV2 Cal. Date： 2015/9/30 Equipment： ENA Network Analyzer Serial No.： 4d160 Next Cal. Date： 2018/9/30 Environmental condition： Temp： 23.4 ℃ R.H.： 59% Standard List IEEE Recommended Practice for Determining the Peak Spatial-Averaged Specific Absorpiton 1 IEEE Std 1528-2013 Rate(SAR) in the Human Head from Wireless Communication Devices: Measurement Texhniques, June 2013 Procedure to determine the Specific Absorption Rate (SAR) for wireless communication devices used in 2 IEC 62209-2 close proximity to the human body(frequency range of 30 MHz to 6 GHz), March 2010 3 KDB865664 SAR Measurement Requirements for 100 MHz to 6 GHz Equipment Information Equipment： Manufacturer： Model No.： Serial No.： Cal.Organization： Certificate No.： Cal. Date： ENA Network Agilent E5071C MY46102965 NA NA Mar. 27, 2016 Analyzer Original Cal. Report Calibration Value： For Head Tissue Frequency Item Original Cal. Result Verified on 2016/7/26 Deviation Result Annex Impedance, transformed to feed 51.6Ω-3.1jΩ 48.3Ω-1.1jΩ <5Ω Pass 835MHz Return Loss(dB) -29.3 -33.5 -14.3% Pass For Body Tissue Frequency Item Original Cal. Result Verified on 2016/7/12 Deviation Impedance, I d transformed f d to feed f d 47.2Ω-5jΩ 47 2Ω 5jΩ 47.81Ω-5.24jΩ 47 81Ω 5 24jΩ <5Ω 5Ω Pass P 835MHz Return Loss(dB) -24.7 -25.44 -3.0% Pass Impedance Test -Head Return Loss Test-Head Impedance Test -Body Return Loss Test-Body From NO.：E_YYMMDD；E=Dipole NO. ,YYMMDD=Year/Month/Date。 FM-xxx-xx Ver.1.0


Document Created: 2019-08-29 18:15:30
Document Modified: 2019-08-29 18:15:30
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC