SAR Test report Appendix B

FCC ID: N7NEM7455

RF Exposure Info

Download: PDF
FCCID_3899267

Test Laboratory: BTL Inc. Date: 2018/6/2 T09_UMTS B2_RMC12.2K_CH9538_Rear Face_0cm_Tablet_Sensor on DUT: 1805C106; Communication System: UID 0, UMTS-FDD(WCDMA) (0); Frequency: 1907.6 MHz; Duty Cycle: 1:1 3 Medium parameters used: f = 1908 MHz; σ = 1.556 S/m; εr = 52.513; ρ = 1000 kg/m Ambient Temperature：23.4 ℃; Liquid Temperature：22.5 ℃ DASY Configuration:  Probe: EX3DV4 - SN7396; ConvF(7.91, 7.91, 7.91); Calibrated: 2018/5/29;  Sensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0  Electronics: DAE4 Sn1390; Calibrated: 2018/5/11  Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:1222  DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373) Area Scan (7x10x1): Interpolated grid: dx=15 mm, dy=15 mm Maximum value of SAR (interpolated) = 0.893 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 0.6830 V/m; Power Drift = 0.10 dB Peak SAR (extrapolated) = 1.31 W/kg SAR(1 g) = 0.683 W/kg; SAR(10 g) = 0.341 W/kg Maximum value of SAR (measured) = 0.857 W/kg

Test Laboratory: BTL Inc. Date: 2018/6/1 T31_UMTS B4_RMC12.2K_CH1413_Rear Face_0cm_Tablet_Sensor on DUT: 1805C106; Communication System: UID 0, UMTS-FDD(WCDMA) (0); Frequency: 1732.6 MHz; Duty Cycle: 1:1 3 Medium parameters used: f = 1733 MHz; σ = 1.48 S/m; εr = 52.446; ρ = 1000 kg/m Ambient Temperature：23.5 ℃; Liquid Temperature：22.3 ℃ DASY Configuration:  Probe: EX3DV4 - SN7396; ConvF(8.2, 8.2, 8.2); Calibrated: 2018/5/29;  Sensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0  Electronics: DAE4 Sn1390; Calibrated: 2018/5/11  Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:1222  DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373) Area Scan (8x11x1): Interpolated grid: dx=15 mm, dy=15 mm Maximum value of SAR (interpolated) = 1.31 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 1.664 V/m; Power Drift = 0.05 dB Peak SAR (extrapolated) = 2.07 W/kg SAR(1 g) = 1.06 W/kg; SAR(10 g) = 0.513 W/kg Maximum value of SAR (measured) = 1.41 W/kg

Test Laboratory: BTL Inc. Date: 2018/5/31 T56_UMTS B5_RMC12.2K_CH4182_Rear Face_0cm_Tablet_Sensor on DUT: 1805C106; Communication System: UID 0, UMTS-FDD(WCDMA) (0); Frequency: 836.4 MHz; Duty Cycle: 1:1 3 Medium parameters used (interpolated): f = 836.4 MHz; σ = 0.979 S/m; εr = 55.603; ρ = 1000 kg/m Ambient Temperature：23.4 ℃; Liquid Temperature：22.4 ℃ DASY Configuration:  Probe: EX3DV4 - SN7396; ConvF(9.89, 9.89, 9.89); Calibrated: 2018/5/29;  Sensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0  Electronics: DAE4 Sn1390; Calibrated: 2018/5/11  Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:1222  DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373) Area Scan (7x10x1): Interpolated grid: dx=15 mm, dy=15 mm Maximum value of SAR (interpolated) = 1.10 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 2.817 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 1.63 W/kg SAR(1 g) = 0.916 W/kg; SAR(10 g) = 0.510 W/kg Maximum value of SAR (measured) = 1.06 W/kg

Test Laboratory: BTL Inc. Date: 2018/6/2 T20_UMTS B2_RMC12.2K_CH9262_Rear Face_1.1cm_Tablet_Sensor off DUT: 1805C106; Communication System: UID 0, UMTS-FDD(WCDMA) (0); Frequency: 1852.4 MHz; Duty Cycle: 1:1 3 Medium parameters used (interpolated): f = 1852.4 MHz; σ = 1.478 S/m; εr = 52.686; ρ = 1000 kg/m Ambient Temperature：23.4 ℃; Liquid Temperature：22.5 ℃ DASY Configuration:  Probe: EX3DV4 - SN7396; ConvF(7.91, 7.91, 7.91); Calibrated: 2018/5/29;  Sensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0  Electronics: DAE4 Sn1390; Calibrated: 2018/5/11  Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:1222  DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373) Area Scan (7x10x1): Interpolated grid: dx=15 mm, dy=15 mm Maximum value of SAR (interpolated) = 1.53 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 6.784 V/m; Power Drift = -0.07 dB Peak SAR (extrapolated) = 2.08 W/kg SAR(1 g) = 1.22 W/kg; SAR(10 g) = 0.675 W/kg Maximum value of SAR (measured) = 1.51 W/kg

Test Laboratory: BTL Inc. Date: 2018/6/1 T43_UMTS B4_RMC12.2K_CH1312_Top Side_1.0cm_Tablet_Sensor off DUT: 1805C106; Communication System: UID 0, UMTS-FDD(WCDMA) (0); Frequency: 1712.4 MHz; Duty Cycle: 1:1 3 Medium parameters used (interpolated): f = 1712.4 MHz; σ = 1.466 S/m; εr = 52.581; ρ = 1000 kg/m Ambient Temperature：23.5 ℃; Liquid Temperature：22.3 ℃ DASY Configuration:  Probe: EX3DV4 - SN7396; ConvF(8.2, 8.2, 8.2); Calibrated: 2018/5/29;  Sensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0  Electronics: DAE4 Sn1390; Calibrated: 2018/5/11  Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:1222  DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373) Area Scan (7x11x1): Interpolated grid: dx=15 mm, dy=15 mm Maximum value of SAR (interpolated) = 1.44 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 9.264 V/m; Power Drift = 0.16 dB Peak SAR (extrapolated) = 1.85 W/kg SAR(1 g) = 1.16 W/kg; SAR(10 g) = 0.700 W/kg Maximum value of SAR (measured) = 1.38 W/kg

Test Laboratory: BTL Inc. Date: 2018/5/31 T66_UMTS B5_RMC12.2K_CH4182_Left Side_0cm_Tablet_Sensor off DUT: 1805C106; Communication System: UID 0, UMTS-FDD(WCDMA) (0); Frequency: 836.4 MHz; Duty Cycle: 1:1 3 Medium parameters used (interpolated): f = 836.4 MHz; σ = 0.979 S/m; εr = 55.603; ρ = 1000 kg/m Ambient Temperature：23.4 ℃; Liquid Temperature：22.4 ℃ DASY Configuration:  Probe: EX3DV4 - SN7396; ConvF(9.89, 9.89, 9.89); Calibrated: 2018/5/29;  Sensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0  Electronics: DAE4 Sn1390; Calibrated: 2018/5/11  Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:1222  DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373) Area Scan (7x13x1): Interpolated grid: dx=15 mm, dy=15 mm Maximum value of SAR (interpolated) = 0.608 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 22.92 V/m; Power Drift = 0.15 dB Peak SAR (extrapolated) = 0.803 W/kg SAR(1 g) = 0.541 W/kg; SAR(10 g) = 0.360 W/kg Maximum value of SAR (measured) = 0.637 W/kg

Test Laboratory: BTL Inc. Date: 2018/6/1 T97_LTE B4_QPSK20M_CH20300_1RB_Rear Face_0cm_Tablet_Sensor on DUT: 1805C106; Communication System: UID 0, LTE-FDD(1RB,20MHz,QPSK) (0); Frequency: 1745 MHz; Duty Cycle: 1:1 3 Medium parameters used: f = 1745 MHz; σ = 1.493 S/m; εr = 52.375; ρ = 1000 kg/m Ambient Temperature：23.5 ℃; Liquid Temperature：22.3 ℃ DASY Configuration:  Probe: EX3DV4 - SN7396; ConvF(8.2, 8.2, 8.2); Calibrated: 2018/5/29;  Sensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0  Electronics: DAE4 Sn1390; Calibrated: 2018/5/11  Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:1222  DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373) Area Scan (8x11x1): Interpolated grid: dx=15 mm, dy=15 mm Maximum value of SAR (interpolated) = 1.16 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 1.589 V/m; Power Drift = 0.07 dB Peak SAR (extrapolated) = 1.97 W/kg SAR(1 g) = 1 W/kg; SAR(10 g) = 0.489 W/kg Maximum value of SAR (measured) = 1.33 W/kg

Test Laboratory: BTL Inc. Date: 2018/6/3 T121_LTE B7_QPSK20M_CH20850_1RB_Rear Face_0cm_Tablet_Sensor on DUT: 1805C106; Communication System: UID 0, LTE-FDD(1RB,20MHz,QPSK) (0); Frequency: 2510 MHz; Duty Cycle: 1:1 3 Medium parameters used: f = 2510 MHz; σ = 2.124 S/m; εr = 52.385; ρ = 1000 kg/m Ambient Temperature：23.2 ℃; Liquid Temperature：22.2 ℃ DASY Configuration:  Probe: EX3DV4 - SN7396; ConvF(7.3, 7.3, 7.3); Calibrated: 2018/5/29;  Sensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0  Electronics: DAE4 Sn1390; Calibrated: 2018/5/11  Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:1222  DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373) Area Scan (8x12x1): Interpolated grid: dx=12 mm, dy=12 mm Maximum value of SAR (interpolated) = 1.45 W/kg Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 0.5300 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 2.40 W/kg SAR(1 g) = 1.01 W/kg; SAR(10 g) = 0.429 W/kg Maximum value of SAR (measured) = 1.25 W/kg

Test Laboratory: BTL Inc. Date: 2018/6/1 T107_LTE B4_QPSK20M_CH20175_1RB_Top Side_1.0cm_Tablet_Sensor off DUT: 1805C106; Communication System: UID 0, LTE-FDD(1RB,20MHz,QPSK) (0); Frequency: 1732.5 MHz; Duty Cycle: 1:1 3 Medium parameters used (interpolated): f = 1732.5 MHz; σ = 1.479 S/m; εr = 52.449; ρ = 1000 kg/m Ambient Temperature：23.5 ℃; Liquid Temperature：22.3 ℃ DASY Configuration:  Probe: EX3DV4 - SN7396; ConvF(8.2, 8.2, 8.2); Calibrated: 2018/5/29;  Sensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0  Electronics: DAE4 Sn1390; Calibrated: 2018/5/11  Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:1222  DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373) Area Scan (7x11x1): Interpolated grid: dx=15 mm, dy=15 mm Maximum value of SAR (interpolated) = 1.35 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 9.216 V/m; Power Drift = 0.19 dB Peak SAR (extrapolated) = 1.77 W/kg SAR(1 g) = 1.11 W/kg; SAR(10 g) = 0.670 W/kg Maximum value of SAR (measured) = 1.32 W/kg

Test Laboratory: BTL Inc. Date: 2018/6/3 T135_LTE B7_QPSK20M_CH21100_1RB_Rear Face_1.1cm_Tablet_Sensor off DUT: 1805C106; Communication System: UID 0, LTE-FDD(1RB,20MHz,QPSK) (0); Frequency: 2535 MHz; Duty Cycle: 1:1 3 Medium parameters used: f = 2535 MHz; σ = 2.113 S/m; εr = 52.544; ρ = 1000 kg/m Ambient Temperature：23.2 ℃; Liquid Temperature：22.2 ℃ DASY Configuration:  Probe: EX3DV4 - SN7396; ConvF(7.3, 7.3, 7.3); Calibrated: 2018/5/29;  Sensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0  Electronics: DAE4 Sn1390; Calibrated: 2018/5/11  Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:1222  DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373) Area Scan (8x12x1): Interpolated grid: dx=12 mm, dy=12 mm Maximum value of SAR (interpolated) = 0.751 W/kg Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 4.761 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 1.41 W/kg SAR(1 g) = 0.672 W/kg; SAR(10 g) = 0.322 W/kg Maximum value of SAR (measured) = 0.874 W/kg

Test Laboratory: BTL Inc. Date: 2018/5/30 T177_LTE B12_QPSK10M_CH23130_1RB_Rear Face_0cm_Tablet_Sensor on DUT: 1805C106; Communication System: UID 0, LTE-FDD(1RB,10MHz,QPSK) (0); Frequency: 711 MHz; Duty Cycle: 1:1 3 Medium parameters used: f = 711 MHz; σ = 0.927 S/m; εr = 56.052; ρ = 1000 kg/m Ambient Temperature：23.2 ℃; Liquid Temperature：22.5 ℃ DASY Configuration:  Probe: EX3DV4 - SN7396; ConvF(10.3, 10.3, 10.3); Calibrated: 2018/5/29;  Sensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0  Electronics: DAE4 Sn1390; Calibrated: 2018/5/11  Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:1222  DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373) Area Scan (8x11x1): Interpolated grid: dx=15 mm, dy=15 mm Maximum value of SAR (interpolated) = 0.471 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 2.983 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 0.721 W/kg SAR(1 g) = 0.427 W/kg; SAR(10 g) = 0.257 W/kg Maximum value of SAR (measured) = 0.504 W/kg

Test Laboratory: BTL Inc. Date: 2018/5/30 T215_LTE B13_QPSK10M_CH23230_1RB_Rear Face_0cm_Tablet_Sensor on DUT: 1805C106; Communication System: UID 0, LTE-FDD(1RB,10MHz,QPSK) (0); Frequency: 782 MHz; Duty Cycle: 1:1 3 Medium parameters used: f = 782 MHz; σ = 0.99 S/m; εr = 55.245; ρ = 1000 kg/m Ambient Temperature：23.2 ℃; Liquid Temperature：22.5 ℃ DASY Configuration:  Probe: EX3DV4 - SN7396; ConvF(10.3, 10.3, 10.3); Calibrated: 2018/5/29;  Sensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0  Electronics: DAE4 Sn1390; Calibrated: 2018/5/11  Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:1222  DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373) Area Scan (8x11x1): Interpolated grid: dx=15 mm, dy=15 mm Maximum value of SAR (interpolated) = 0.547 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 3.747 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 0.811 W/kg SAR(1 g) = 0.452 W/kg; SAR(10 g) = 0.263 W/kg Maximum value of SAR (measured) = 0.572 W/kg

Test Laboratory: BTL Inc. Date: 2018/5/30 T192_LTE B12_QPSK10M_CH23130_1RB_Left Side_0cm_Tablet_Sensor off DUT: 1805C106; Communication System: UID 0, LTE-FDD(1RB,10MHz,QPSK) (0); Frequency: 711 MHz; Duty Cycle: 1:1 3 Medium parameters used: f = 711 MHz; σ = 0.927 S/m; εr = 56.052; ρ = 1000 kg/m Ambient Temperature：23.2 ℃; Liquid Temperature：22.5 ℃ DASY Configuration:  Probe: EX3DV4 - SN7396; ConvF(10.3, 10.3, 10.3); Calibrated: 2018/5/29;  Sensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0  Electronics: DAE4 Sn1390; Calibrated: 2018/5/11  Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:1222  DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373) Area Scan (7x13x1): Interpolated grid: dx=15 mm, dy=15 mm Maximum value of SAR (interpolated) = 0.294 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 15.07 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 0.410 W/kg SAR(1 g) = 0.286 W/kg; SAR(10 g) = 0.198 W/kg Maximum value of SAR (measured) = 0.308 W/kg

Test Laboratory: BTL Inc. Date: 2018/5/30 T221_LTE B13_QPSK10M_CH23230_1RB_Left Side_0cm_Tablet_Sensor off DUT: 1805C106; Communication System: UID 0, LTE-FDD(1RB,10MHz,QPSK) (0); Frequency: 782 MHz; Duty Cycle: 1:1 3 Medium parameters used: f = 782 MHz; σ = 0.99 S/m; εr = 55.245; ρ = 1000 kg/m Ambient Temperature：23.2 ℃; Liquid Temperature：22.5 ℃ DASY Configuration:  Probe: EX3DV4 - SN7396; ConvF(10.3, 10.3, 10.3); Calibrated: 2018/5/29;  Sensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0  Electronics: DAE4 Sn1390; Calibrated: 2018/5/11  Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:1222  DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373) Area Scan (7x13x1): Interpolated grid: dx=15 mm, dy=15 mm Maximum value of SAR (interpolated) = 0.437 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 19.74 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 0.564 W/kg SAR(1 g) = 0.382 W/kg; SAR(10 g) = 0.255 W/kg Maximum value of SAR (measured) = 0.447 W/kg

Test Laboratory: BTL Inc. Date: 2018/6/2 T246_LTE B25_QPSK20M_CH26590_1RB_Rear Face_0cm_Tablet_Sensor on DUT: 1805C106; Communication System: UID 0, LTE-FDD(1RB,20MHz,QPSK) (0); Frequency: 1905 MHz; Duty Cycle: 1:1 3 Medium parameters used: f = 1905 MHz; σ = 1.552 S/m; εr = 52.51; ρ = 1000 kg/m Ambient Temperature：23.4 ℃; Liquid Temperature：22.5 ℃ DASY Configuration:  Probe: EX3DV4 - SN7396; ConvF(7.91, 7.91, 7.91); Calibrated: 2018/5/29;  Sensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0  Electronics: DAE4 Sn1390; Calibrated: 2018/5/11  Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:1222  DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373) Area Scan (7x10x1): Interpolated grid: dx=15 mm, dy=15 mm Maximum value of SAR (interpolated) = 1.14 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 1.535 V/m; Power Drift = 0.05 dB Peak SAR (extrapolated) = 1.68 W/kg SAR(1 g) = 0.883 W/kg; SAR(10 g) = 0.441 W/kg Maximum value of SAR (measured) = 1.12 W/kg

Test Laboratory: BTL Inc. Date: 2018/5/31 T297_LTE B26_QPSK15M_CH26965_1RB_Rear Face_0cm_Tablet_Sensor on DUT: 1805C106; Communication System: UID 0, LTE-FDD (SC-FDMA,1RB,15MHz,QPSK (0); Frequency: 841.5 MHz; Duty Cycle: 1:1 3 Medium parameters used (interpolated): f = 841.5 MHz; σ = 0.985 S/m; εr = 55.54; ρ = 1000 kg/m Ambient Temperature：23.4 ℃; Liquid Temperature：22.4 ℃ DASY Configuration:  Probe: EX3DV4 - SN7396; ConvF(9.89, 9.89, 9.89); Calibrated: 2018/5/29;  Sensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0  Electronics: DAE4 Sn1390; Calibrated: 2018/5/11  Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:1222  DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373) Area Scan (7x10x1): Interpolated grid: dx=15 mm, dy=15 mm Maximum value of SAR (interpolated) = 1.08 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 3.058 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 1.52 W/kg SAR(1 g) = 0.860 W/kg; SAR(10 g) = 0.485 W/kg Maximum value of SAR (measured) = 1.10 W/kg

Test Laboratory: BTL Inc. Date: 2018/6/2 T270_LTE B25_QPSK20M_CH26140_1RB_Rear Face_1.1cm_Tablet_Sensor off DUT: 1805C106; Communication System: UID 0, LTE-FDD(1RB,20MHz,QPSK) (0); Frequency: 1860 MHz; Duty Cycle: 1:1 3 Medium parameters used: f = 1860 MHz; σ = 1.487 S/m; εr = 52.657; ρ = 1000 kg/m Ambient Temperature：23.4 ℃; Liquid Temperature：22.5 ℃ DASY Configuration:  Probe: EX3DV4 - SN7396; ConvF(7.91, 7.91, 7.91); Calibrated: 2018/5/29;  Sensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0  Electronics: DAE4 Sn1390; Calibrated: 2018/5/11  Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:1222  DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373) Area Scan (7x10x1): Interpolated grid: dx=15 mm, dy=15 mm Maximum value of SAR (interpolated) = 1.15 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 7.247 V/m; Power Drift = -0.05 dB Peak SAR (extrapolated) = 1.64 W/kg SAR(1 g) = 0.959 W/kg; SAR(10 g) = 0.530 W/kg Maximum value of SAR (measured) = 1.16 W/kg

Test Laboratory: BTL Inc. Date: 2018/5/31 T312_LTE B26_QPSK15M_CH26965_1RB_Left Side_0cm_Tablet_Sensor off DUT: 1805C106; Communication System: UID 0, LTE-FDD (SC-FDMA, 1RB, 15 MHz,QPSK (0); Frequency: 841.5 MHz; Duty Cycle: 1:1 3 Medium parameters used (interpolated): f = 841.5 MHz; σ = 0.985 S/m; εr = 55.54; ρ = 1000 kg/m Ambient Temperature：23.4 ℃; Liquid Temperature：22.4 ℃ DASY Configuration:  Probe: EX3DV4 - SN7396; ConvF(9.89, 9.89, 9.89); Calibrated: 2018/5/29;  Sensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0  Electronics: DAE4 Sn1390; Calibrated: 2018/5/11  Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:1222  DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373) Area Scan (7x13x1): Interpolated grid: dx=15 mm, dy=15 mm Maximum value of SAR (interpolated) = 0.598 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 23.64 V/m; Power Drift = 0.06 dB Peak SAR (extrapolated) = 0.764 W/kg SAR(1 g) = 0.516 W/kg; SAR(10 g) = 0.344 W/kg Maximum value of SAR (measured) = 0.607 W/kg

Test Laboratory: BTL Inc. Date: 2018/6/3 T325_LTE B41_QPSK20M_CH40620_1RB_Rear Face_0cm_Tablet_Sensor on DUT: 1805C106; Communication System: UID 0, LTE-TDD (SC-FDMA, 1 RB,20MHz, QPSK) (0); Frequency: 2593 MHz; Duty Cycle: 1:1.58 3 Medium parameters used: f = 2593 MHz; σ = 2.225 S/m; εr = 52.106; ρ = 1000 kg/m Ambient Temperature：23.2 ℃; Liquid Temperature：22.2 ℃ DASY Configuration:  Probe: EX3DV4 - SN7396; ConvF(7.3, 7.3, 7.3); Calibrated: 2018/5/29;  Sensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0  Electronics: DAE4 Sn1390; Calibrated: 2018/5/11  Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:1222  DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373) Area Scan (10x13x1): Interpolated grid: dx=12 mm, dy=12 mm Maximum value of SAR (interpolated) = 0.864 W/kg Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 0 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 1.51 W/kg SAR(1 g) = 0.657 W/kg; SAR(10 g) = 0.269 W/kg Maximum value of SAR (measured) = 0.945 W/kg

Test Laboratory: BTL Inc. Date: 2018/6/3 T340_LTE B41_QPSK20M_CH39750_1RB_Rear Face_1.1cm_Tablet_Sensor off DUT: 1805C106; Communication System: UID 0, LTE-TDD (SC-FDMA, 1 RB,20MHz, QPSK) (0); Frequency: 2506 MHz; Duty Cycle: 1:1.58 3 Medium parameters used: f = 2506 MHz; σ = 2.12 S/m; εr = 52.395; ρ = 1000 kg/m Ambient Temperature：23.2 ℃; Liquid Temperature：22.2 ℃ DASY Configuration:  Probe: EX3DV4 - SN7396; ConvF(7.7, 7.7, 7.7); Calibrated: 2018/5/29;  Sensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0  Electronics: DAE4 Sn1390; Calibrated: 2018/5/11  Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:1222  DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373) Area Scan (10x13x1): Interpolated grid: dx=12 mm, dy=12 mm Maximum value of SAR (interpolated) = 0.409 W/kg Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 3.338 V/m; Power Drift = -0.11 dB Peak SAR (extrapolated) = 0.690 W/kg SAR(1 g) = 0.342 W/kg; SAR(10 g) = 0.164 W/kg Maximum value of SAR (measured) = 0.431 W/kg

Test Laboratory: BTL Inc. Date: 2018/6/2 T03_UMTS B2_RMC12.2K_CH9262_Back of Screen_2.5cm_Notebook_Sensor off DUT: 1805C106; Communication System: UID 0, UMTS-FDD(WCDMA) (0); Frequency: 1852.4 MHz; Duty Cycle: 1:1 3 Medium parameters used (interpolated): f = 1852.4 MHz; σ = 1.478 S/m; εr = 52.686; ρ = 1000 kg/m Ambient Temperature：23.4 ℃; Liquid Temperature：22.5 ℃ DASY Configuration:  Probe: EX3DV4 - SN7396; ConvF(7.91, 7.91, 7.91); Calibrated: 2018/5/29;  Sensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0  Electronics: DAE4 Sn1390; Calibrated: 2018/5/11  Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:1222  DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373) Area Scan (7x10x1): Interpolated grid: dx=15 mm, dy=15 mm Maximum value of SAR (interpolated) = 0.258 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 5.338 V/m; Power Drift = 0.06 dB Peak SAR (extrapolated) = 0.339 W/kg SAR(1 g) = 0.218 W/kg; SAR(10 g) = 0.136 W/kg Maximum value of SAR (measured) = 0.258 W/kg

Test Laboratory: BTL Inc. Date: 2018/6/1 T28_UMTS B4_RMC12.2K_CH1513_Back of Screen_2.5cm_Notebook_Sensor off DUT: 1805C106; Communication System: UID 0, UMTS-FDD(WCDMA) (0); Frequency: 1752.6 MHz; Duty Cycle: 1:1 3 Medium parameters used: f = 1753 MHz; σ = 1.504 S/m; εr = 52.334; ρ = 1000 kg/m Ambient Temperature：23.5 ℃; Liquid Temperature：22.3 ℃ DASY Configuration:  Probe: EX3DV4 - SN7396; ConvF(8.2, 8.2, 8.2); Calibrated: 2018/5/29;  Sensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0  Electronics: DAE4 Sn1390; Calibrated: 2018/5/11  Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:1222  DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373) Area Scan (8x11x1): Interpolated grid: dx=15 mm, dy=15 mm Maximum value of SAR (interpolated) = 0.284 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 3.597 V/m; Power Drift = -0.07 dB Peak SAR (extrapolated) = 0.367 W/kg SAR(1 g) = 0.239 W/kg; SAR(10 g) = 0.154 W/kg Maximum value of SAR (measured) = 0.278 W/kg

Test Laboratory: BTL Inc. Date: 2018/5/31 T52_UMTS B5_RMC12.2K_CH4132_Back of Screen_2.5cm_Notebook_Sensor off DUT: 1805C106; Communication System: UID 0, UMTS-FDD(WCDMA) (0); Frequency: 826.4 MHz; Duty Cycle: 1:1 3 Medium parameters used (interpolated): f = 826.4 MHz; σ = 0.968 S/m; εr = 55.724; ρ = 1000 kg/m Ambient Temperature：23.4 ℃; Liquid Temperature：22.4 ℃ DASY Configuration:  Probe: EX3DV4 - SN7396; ConvF(9.89, 9.89, 9.89); Calibrated: 2018/5/29;  Sensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0  Electronics: DAE4 Sn1390; Calibrated: 2018/5/11  Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:1222  DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373) Area Scan (11x13x1): Interpolated grid: dx=15 mm, dy=15 mm Maximum value of SAR (interpolated) = 0.169 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 6.287 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 0.193 W/kg SAR(1 g) = 0.154 W/kg; SAR(10 g) = 0.119 W/kg Maximum value of SAR (measured) = 0.169 W/kg

Test Laboratory: BTL Inc. Date: 2018/6/1 T85_LTE B4_QPSK20M_CH20300_1RB_Back of Screen_2.5cm_Notebook_Sensor off DUT: 1805C106; Communication System: UID 0, LTE-FDD(1RB,20MHz,QPSK) (0); Frequency: 1745 MHz; Duty Cycle: 1:1 3 Medium parameters used: f = 1745 MHz; σ = 1.493 S/m; εr = 52.375; ρ = 1000 kg/m Ambient Temperature：23.5 ℃; Liquid Temperature：22.3 ℃ DASY Configuration:  Probe: EX3DV4 - SN7396; ConvF(8.2, 8.2, 8.2); Calibrated: 2018/5/29;  Sensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0  Electronics: DAE4 Sn1390; Calibrated: 2018/5/11  Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:1222  DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373) Area Scan (11x13x1): Interpolated grid: dx=15 mm, dy=15 mm Maximum value of SAR (interpolated) = 0.272 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 3.426 V/m; Power Drift = 0.06 dB Peak SAR (extrapolated) = 0.341 W/kg SAR(1 g) = 0.223 W/kg; SAR(10 g) = 0.144 W/kg Maximum value of SAR (measured) = 0.259 W/kg

Test Laboratory: BTL Inc. Date: 2018/6/3 T112_LTE B7_QPSK20M_CH21100_1RB_Back of Screen_2.5cm_Notebook_Sensor off DUT: 1805C106; Communication System: UID 0, LTE-FDD(1RB,20MHz,QPSK) (0); Frequency: 2535 MHz; Duty Cycle: 1:1 3 Medium parameters used: f = 2535 MHz; σ = 2.113 S/m; εr = 52.544; ρ = 1000 kg/m Ambient Temperature：23.2 ℃; Liquid Temperature：22.2 ℃ DASY Configuration:  Probe: EX3DV4 - SN7396; ConvF(7.3, 7.3, 7.3); Calibrated: 2018/5/29;  Sensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0  Electronics: DAE4 Sn1390; Calibrated: 2018/5/11  Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:1222  DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373) Area Scan (8x12x1): Interpolated grid: dx=12 mm, dy=12 mm Maximum value of SAR (interpolated) = 0.190 W/kg Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 3.457 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 0.286 W/kg SAR(1 g) = 0.153 W/kg; SAR(10 g) = 0.088 W/kg Maximum value of SAR (measured) = 0.186 W/kg

Test Laboratory: BTL Inc. Date: 2018/5/30 T156_LTE B12_QPSK10M_CH23130_1RB_Back of Screen_2.5cm_Notebook_Sensor off DUT: 1805C106; Communication System: UID 0, LTE-FDD(1RB,10MHz,QPSK) (0); Frequency: 711 MHz; Duty Cycle: 1:1 3 Medium parameters used: f = 711 MHz; σ = 0.927 S/m; εr = 56.052; ρ = 1000 kg/m Ambient Temperature：23.2 ℃; Liquid Temperature：22.5 ℃ DASY Configuration:  Probe: EX3DV4 - SN7396; ConvF(10.3, 10.3, 10.3); Calibrated: 2018/5/29;  Sensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0  Electronics: DAE4 Sn1390; Calibrated: 2018/5/11  Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:1222  DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373) Area Scan (13x12x1): Interpolated grid: dx=15 mm, dy=15 mm Maximum value of SAR (interpolated) = 0.0747 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 3.015 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 0.0940 W/kg SAR(1 g) = 0.070 W/kg; SAR(10 g) = 0.050 W/kg Maximum value of SAR (measured) = 0.0741 W/kg

Test Laboratory: BTL Inc. Date: 2018/5/30 T197_LTE B13_QPSK10M_CH23230_1RB_Back of Screen_2.5cm_Notebook_Sensor off DUT: 1805C106; Communication System: UID 0, LTE-FDD(1RB,10MHz,QPSK) (0); Frequency: 782 MHz; Duty Cycle: 1:1 3 Medium parameters used: f = 782 MHz; σ = 0.99 S/m; εr = 55.245; ρ = 1000 kg/m Ambient Temperature：23.2 ℃; Liquid Temperature：22.5 ℃ DASY Configuration:  Probe: EX3DV4 - SN7396; ConvF(10.3, 10.3, 10.3); Calibrated: 2018/5/29;  Sensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0  Electronics: DAE4 Sn1390; Calibrated: 2018/5/11  Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:1222  DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373) Area Scan (13x12x1): Interpolated grid: dx=15 mm, dy=15 mm Maximum value of SAR (interpolated) = 0.149 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 6.470 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 0.178 W/kg SAR(1 g) = 0.133 W/kg; SAR(10 g) = 0.097 W/kg Maximum value of SAR (measured) = 0.149 W/kg

Test Laboratory: BTL Inc. Date: 2018/6/2 T239_LTE B25_QPSK20M_CH26140_1RB_Back of Screen_2.5cm_Notebook_Sensor off DUT: 1805C106; Communication System: UID 0, LTE-FDD(1RB,20MHz,QPSK) (0); Frequency: 1860 MHz; Duty Cycle: 1:1 Medium parameters used: f = 1860 MHz; σ = 1.487 S/m; εr = 52.657; ρ = 1000 kg/m3 Ambient Temperature：23.4 ℃; Liquid Temperature：22.5 ℃ DASY Configuration:  Probe: EX3DV4 - SN7396; ConvF(7.91, 7.91, 7.91); Calibrated: 2018/5/29;  Sensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0  Electronics: DAE4 Sn1390; Calibrated: 2018/5/11  Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:1222  DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373) Area Scan (7x10x1): Interpolated grid: dx=15 mm, dy=15 mm Maximum value of SAR (interpolated) = 0.225 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 4.833 V/m; Power Drift = -0.13 dB Peak SAR (extrapolated) = 0.291 W/kg SAR(1 g) = 0.185 W/kg; SAR(10 g) = 0.115 W/kg Maximum value of SAR (measured) = 0.217 W/kg

Test Laboratory: BTL Inc. Date: 2018/5/31 T282_LTE B26_QPSK15M_CH26765_1RB_Back of Screen_2.5cm_Notebook_Sensor off DUT: 1805C106; Communication System: UID 0, LTE-FDD (SC-FDMA, 1RB, 15 MHz,QPSK (0); Frequency: 821.5 MHz; Duty Cycle: 1:1 3 Medium parameters used (interpolated): f = 821.5 MHz; σ = 0.962 S/m; εr = 55.78; ρ = 1000 kg/m Ambient Temperature：23.4 ℃; Liquid Temperature：22.4 ℃ DASY Configuration:  Probe: EX3DV4 - SN7396; ConvF(9.89, 9.89, 9.89); Calibrated: 2018/5/29;  Sensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0  Electronics: DAE4 Sn1390; Calibrated: 2018/5/11  Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:1222  DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373) Area Scan (11x13x1): Interpolated grid: dx=15 mm, dy=15 mm Maximum value of SAR (interpolated) = 0.157 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 6.400 V/m; Power Drift = 0.07 dB Peak SAR (extrapolated) = 0.180 W/kg SAR(1 g) = 0.144 W/kg; SAR(10 g) = 0.112 W/kg Maximum value of SAR (measured) = 0.158 W/kg

Test Laboratory: BTL Inc. Date: 2018/6/3 T317_LTE B41_QPSK20M_CH40620_1RB_Back of Screen_2.5cm_Notebook_Sensor off DUT: 1805C106; Communication System: UID 0, LTE-TDD (SC-FDMA, 1 RB,20MHz, QPSK) (0); Frequency: 2593 MHz; Duty Cycle: 1:1.58 3 Medium parameters used: f = 2593 MHz; σ = 2.225 S/m; εr = 52.106; ρ = 1000 kg/m Ambient Temperature：23.2 ℃; Liquid Temperature：22.2 ℃ DASY Configuration:  Probe: EX3DV4 - SN7396; ConvF(7.3, 7.3, 7.3); Calibrated: 2018/5/29;  Sensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0  Electronics: DAE4 Sn1390; Calibrated: 2018/5/11  Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:1222  DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373) Area Scan (10x13x1): Interpolated grid: dx=12 mm, dy=12 mm Maximum value of SAR (interpolated) = 0.0641 W/kg Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 1.634 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 0.105 W/kg SAR(1 g) = 0.054 W/kg; SAR(10 g) = 0.027 W/kg Maximum value of SAR (measured) = 0.0673 W/kg


Document Created: 2019-07-25 02:13:46
Document Modified: 2019-07-25 02:13:46
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC