FCC Modular Letter

FCC ID: N7NBX31A

Cover Letter(s)

Download: PDF
FCCID_4001989

Modular Approval Checklist FCC ID: N7NBX31A Item Requirements EUT Module RADIO elements are The radio elements must have the radio 1 shielded. Please see submitted frequency circuitry shielded external photograph exhibits Module chipset design The module must have buffered 2 incorporates integrated buffer modulation/data inputs circuitry Module chipset incorporates The module must contain power supply 3 voltage regulation to regulation on the module transceiver circuitry The module must contain a permanently attached antenna, or contain a unique antenna EUT requires professional 4 connector, and be marketed and operated only installation. with specific antenna(s) EUT conformance testing was The module must demonstrate compliance in a 5 performed in a standalone stand-alone configuration configuration The module must have a FCC ID label on the module itself. That FCC ID label must be Please refer to FCC ID label visible through a window on the final device format. Labeling instruction or it must be visible when an access panel, has been provided in the user door or cover is easily removed. If not, a manual exhibit(s). Pursuant to 6 second label must be placed on the outside of FCC Rule §2.925, the FCC the final device that contains the following Identifier will be placed in the text: user manual and on the device packaging. Contains “FCC ID: N7NBX31A” The Module is compliant with The module must comply with all specific all applicable FCC rules. rules applicable to the transmitter. The grantee 7 Compliance requirements are must provide comprehensive instructions to stated in the user manual explain compliance requirements exhibit(s). Compliance with RF exposure The module must comply with RF exposure 8 requirements is addressed in requirements RF exposure report


Document Created: 2018-08-07 15:57:12
Document Modified: 2018-08-07 15:57:12
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC