Sweep time 2 sec

FCC ID: N7NAC750

Test Report

Download: PDF
FCCID_233376

3/15/2002 ‘Re: FCC ID N7NAC750 Applicant: Sierra Wireless Inc. Correspondence Reference Number: 22318 731 Confirmation Number: EA753377 B) Regarding your answer to question 2 and the above reference phone call, it was stated that a sweep time of 5 ms was used for the 30-1000 MHZ plots on pages 14-27 of the test report. Please provide new data with at least 2 second sweep times while using a peak hold mode. Please perform this test with the rotating table moving at no more than 10 degrees in two seconds.’ Response to item B): The plot below shows the results of testing with the settings and test method described in item B). These settings and test method produced identical results for the high, middle and low channels in either TX or idle mode. Only one result graph is included it shows the max. hold peak values for all the channels. The model of host laptop used during this testing is different than that used for the previous testing. Any difference in the results is due to this difference in host laptop PC used for testing. 3/15/02 2:51PM

CETECOM Inc. 411 Dixon Landing Road; Milpitas, CA 95035 Manufacturer: Sierra Wireless Operating condition: TCH CH low, mid and high , PCS 1900 and Idle mode Test Engineer: PETE KREBILL Antenna : vertical/horizontal EUT: vertical Specification: FCC 24 SWEEP TABLE: "FCC 24 Spur 30M-1G" Short Description: FCC 24 30MHz-1GHz Start Stop Detector Meas. IF Frequency Frequency Time Bandw. 30.0 MHz 1.0 GHz MaxPeak 2.0 s 1 MHz Level [dBm] 0 -20 -40 -60 -80 -100 30M40M 50M 70M 100M 200M 300M 400M 600M 1G Frequency [Hz] 3/15/02 2:51PM


Document Created: 2002-03-26 16:01:42
Document Modified: 2002-03-26 16:01:42
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC