SAR attachment 2-1

FCC ID: N7NAC500

RF Exposure Info

Download: PDF
FCCID_1209287

Date/Time: 10/19/2009 4:55:31 PM Test Laboratory: Compliance Certification Services WCDMA Band II DUT: Sierra Wireless; Type: AirCard504; Serial: F9E26290179E20C Communication System: PCS 1900; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.48 mho/m; εr = 54; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 23.0 deg. C; Liquid Temperature: 22.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3686; ConvF(6.85, 6.85, 6.85); Calibrated: 3/23/2009 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 10/20/2008 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 M-ch_Band II R99/Area Scan (10x7x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.844 mW/g M-ch_Band II R99/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 17.7 V/m; Power Drift = -1.28 dB Peak SAR (extrapolated) = 1.15 W/kg SAR(1 g) = 0.734 mW/g; SAR(10 g) = 0.452 mW/g Maximum value of SAR (measured) = 0.878 mW/g 0 dB = 0.878mW/g

Date/Time: 10/27/2009 5:37:56 PM Test Laboratory: Compliance Certification Services WCDMA Band II Ant wide open DUT: Sierra Wireless; Type: AirCard504; Serial: F9E26290179E20C Communication System: PCS 1900; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.48 mho/m; εr = 53.8; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3686; ConvF(6.85, 6.85, 6.85); Calibrated: 3/23/2009 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 9/15/2009 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 M-ch_Band II R99/Area Scan (11x7x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.362 mW/g M-ch_Band II R99/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 13.3 V/m; Power Drift = -0.264 dB Peak SAR (extrapolated) = 0.530 W/kg SAR(1 g) = 0.350 mW/g; SAR(10 g) = 0.226 mW/g Maximum value of SAR (measured) = 0.408 mW/g 0 dB = 0.408mW/g


Document Created: 2009-10-29 13:53:48
Document Modified: 2009-10-29 13:53:48
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC