SAR attachment 2 1 - device plots 1900

FCC ID: N7NAC402

RF Exposure Info

Download: PDF
FCCID_1068256

Date/Time: 1/26/2009 2:10:41 PM Test Laboratory: Compliance Certification Services Lapheld - Express Card Rel. 0 DUT: Sierra Wireless; Type: AC402; Serial: 608EBD6D Communication System: CDMA PCS band; Frequency: 1851.25 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 1851.25 MHz; σ = 1.52 mho/m; εr = 51.8; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 25.0 deg. C; Liquid Temperature: 24.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.7, 8.7, 8.7); Calibrated: 4/23/2008 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 10/20/2008 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 EV-DO Rel. 0 - Low-ch (d=10 mm)/Area Scan (6x10x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.56 mW/g EV-DO Rel. 0 - Low-ch (d=10 mm)/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 1.93 V/m; Power Drift = 0.100 dB Peak SAR (extrapolated) = 2.41 W/kg SAR(1 g) = 1.35 mW/g; SAR(10 g) = 0.750 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.68 mW/g

Date/Time: 1/26/2009 1:45:01 PM Test Laboratory: Compliance Certification Services Lapheld - Express Card Rel. 0 DUT: Sierra Wireless; Type: AC402; Serial: 608EBD6D Communication System: CDMA PCS band; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.55 mho/m; εr = 51.3; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 25.0 deg. C; Liquid Temperature: 24.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.7, 8.7, 8.7); Calibrated: 4/23/2008 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 10/20/2008 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 EV-DO Rel. 0 - Mid-ch (d=10 mm)/Area Scan (6x10x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.70 mW/g EV-DO Rel. 0 - Mid-ch (d=10 mm)/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 32.9 V/m; Power Drift = -0.049 dB Peak SAR (extrapolated) = 2.63 W/kg SAR(1 g) = 1.46 mW/g; SAR(10 g) = 0.801 mW/g Maximum value of SAR (measured) = 1.86 mW/g

Date/Time: 1/26/2009 2:32:54 PM Test Laboratory: Compliance Certification Services Lapheld - Express Card Rel. 0 DUT: Sierra Wireless; Type: AC402; Serial: 608EBD6D Communication System: CDMA PCS band; Frequency: 1851.25 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 1851.25 MHz; σ = 1.52 mho/m; εr = 51.8; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 25.0 deg. C; Liquid Temperature: 24.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.7, 8.7, 8.7); Calibrated: 4/23/2008 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 10/20/2008 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 EV-DO Rel. 0 - High-ch (d=10 mm)/Area Scan (6x10x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.29 mW/g EV-DO Rel. 0 - High-ch (d=10 mm)/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 31.3 V/m; Power Drift = -0.221 dB Peak SAR (extrapolated) = 1.88 W/kg SAR(1 g) = 1.13 mW/g; SAR(10 g) = 0.617 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.42 mW/g

Date/Time: 1/26/2009 12:03:32 PM Test Laboratory: Compliance Certification Services Lapheld - Express Card DUT: Sierra Wireless; Type: AC402; Serial: 608EBD6D Communication System: CDMA PCS band; Frequency: 1851.25 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 1851.25 MHz; σ = 1.52 mho/m; εr = 51.8; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 25.0 deg. C; Liquid Temperature: 24.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.7, 8.7, 8.7); Calibrated: 4/23/2008 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 10/20/2008 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 EV-DO Rev. A - Low-ch (d=10 mm)/Area Scan (6x10x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.61 mW/g EV-DO Rev. A - Low-ch (d=10 mm)/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 32.2 V/m; Power Drift = -0.073 dB Peak SAR (extrapolated) = 2.33 W/kg SAR(1 g) = 1.37 mW/g; SAR(10 g) = 0.768 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.67 mW/g

Date/Time: 1/26/2009 11:37:21 AM Test Laboratory: Compliance Certification Services Lapheld - Express Card DUT: Sierra Wireless; Type: AC402; Serial: 608EBD6D Communication System: CDMA PCS band; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.55 mho/m; εr = 51.3; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 25.0 deg. C; Liquid Temperature: 24.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.7, 8.7, 8.7); Calibrated: 4/23/2008 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 10/20/2008 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 EV-DO Rev. A - Mid-ch (d=10 mm) 2/Area Scan (6x10x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.71 mW/g EV-DO Rev. A - Mid-ch (d=10 mm) 2/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 33.0 V/m; Power Drift = 0.221 dB Peak SAR (extrapolated) = 2.61 W/kg SAR(1 g) = 1.51 mW/g; SAR(10 g) = 0.838 mW/g Maximum value of SAR (measured) = 1.84 mW/g

Date/Time: 1/26/2009 11:58:10 AM Test Laboratory: Compliance Certification Services Lapheld - Express Card DUT: Sierra Wireless; Type: AC402; Serial: 608EBD6D Communication System: CDMA PCS band; Frequency: 1880 MHz;Duty Cycle: 1:1 EV-DO Rev. A - Mid-ch (d=10 mm) 2/Z Scan (1x1x41): Measurement grid: dx=20mm, dy=20mm, dz=2.5mm Maximum value of SAR (measured) = 1.86 mW/g

Date/Time: 1/26/2009 12:45:52 PM Test Laboratory: Compliance Certification Services Lapheld - Express Card DUT: Sierra Wireless; Type: AC402; Serial: 608EBD6D Communication System: CDMA PCS band; Frequency: 1908.75 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 1908.75 MHz; σ = 1.59 mho/m; εr = 51.3; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 25.0 deg. C; Liquid Temperature: 24.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.7, 8.7, 8.7); Calibrated: 4/23/2008 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 10/20/2008 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 EV-DO Rev. A - High-ch (d=10 mm)/Area Scan (6x10x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.44 mW/g EV-DO Rev. A - High-ch (d=10 mm)/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 30.5 V/m; Power Drift = -0.089 dB Peak SAR (extrapolated) = 2.28 W/kg SAR(1 g) = 1.3 mW/g; SAR(10 g) = 0.706 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.60 mW/g

Date/Time: 1/26/2009 4:18:50 PM Test Laboratory: Compliance Certification Services Lapheld - Card Bus PC Card DUT: Sierra Wireless; Type: AC402; Serial: 608EBD6D Communication System: CDMA PCS band; Frequency: 1851.25 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 1851.25 MHz; σ = 1.54 mho/m; εr = 51.6; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 25.0 deg. C; Liquid Temperature: 24.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.7, 8.7, 8.7); Calibrated: 4/23/2008 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 10/20/2008 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 EV-DO Rel. 0 - Low-ch (d=10 mm)/Area Scan (8x11x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.05 mW/g EV-DO Rel. 0 - Low-ch (d=10 mm)/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 28.4 V/m; Power Drift = 0.016 dB Peak SAR (extrapolated) = 1.71 W/kg SAR(1 g) = 1 mW/g; SAR(10 g) = 0.590 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.24 mW/g

Date/Time: 1/26/2009 3:52:51 PM Test Laboratory: Compliance Certification Services Lapheld - Card Bus PC Card DUT: Sierra Wireless; Type: AC402; Serial: 608EBD6D Communication System: CDMA PCS band; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.57 mho/m; εr = 51.3; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 25.0 deg. C; Liquid Temperature: 24.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.7, 8.7, 8.7); Calibrated: 4/23/2008 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 10/20/2008 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 EV-DO Rel. 0 - Mid-ch (d=10 mm)/Area Scan (8x11x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.23 mW/g EV-DO Rel. 0 - Mid-ch (d=10 mm)/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 26.8 V/m; Power Drift = 0.113 dB Peak SAR (extrapolated) = 1.91 W/kg SAR(1 g) = 1.07 mW/g; SAR(10 g) = 0.633 mW/g Maximum value of SAR (measured) = 1.36 mW/g

Date/Time: 1/26/2009 4:44:02 PM Test Laboratory: Compliance Certification Services Lapheld - Card Bus PC Card DUT: Sierra Wireless; Type: AC402; Serial: 608EBD6D Communication System: CDMA PCS band; Frequency: 1908.75 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 1908.75 MHz; σ = 1.59 mho/m; εr = 51.2; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 25.0 deg. C; Liquid Temperature: 24.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.7, 8.7, 8.7); Calibrated: 4/23/2008 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 10/20/2008 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 EV-DO Rel. 0 - High-ch (d=10 mm)/Area Scan (8x11x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.821 mW/g EV-DO Rel. 0 - High-ch (d=10 mm)/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 24.4 V/m; Power Drift = -0.409 dB Peak SAR (extrapolated) = 1.37 W/kg SAR(1 g) = 0.789 mW/g; SAR(10 g) = 0.462 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.959 mW/g

Date/Time: 1/26/2009 5:37:13 PM Test Laboratory: Compliance Certification Services Lapheld - Card Bus PC Card DUT: Sierra Wireless; Type: AC402; Serial: 608EBD6D Communication System: CDMA PCS band; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.57 mho/m; εr = 51.3; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 25.0 deg. C; Liquid Temperature: 24.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.7, 8.7, 8.7); Calibrated: 4/23/2008 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 10/20/2008 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 EV-DO Rev. A - Mid-ch (d=10 mm)/Area Scan (8x11x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.29 mW/g EV-DO Rev. A - Mid-ch (d=10 mm)/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 29.5 V/m; Power Drift = -0.177 dB Peak SAR (extrapolated) = 1.84 W/kg SAR(1 g) = 1.14 mW/g; SAR(10 g) = 0.675 mW/g Maximum value of SAR (measured) = 1.38 mW/g


Document Created: 2009-02-03 17:26:53
Document Modified: 2009-02-03 17:26:53
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC