SAR Plots - repeatability measurements

FCC ID: N7NAC340U

RF Exposure Info

Download: PDF
FCCID_1866291

Test Laboratory: UL CCS SAR Lab E Date: 10/18/2012 GSM850 Frequency: 836.6 MHz; Duty Cycle: 1:4; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.965 mho/m; εr = 54.201; ρ = 1000 kg/m DASY5 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1343; Calibrated: 8/20/2012 - Probe: EX3DV4 - SN3871; ConvF(9.68, 9.68, 9.68); Calibrated: 8/20/2012; - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI v5.0 A; Type: QDOVA002AA; Serial: 1180 Horizontal Up/GPRS 2 slots/Ch 190/Area Scan (10x13x1): Measurement grid: dx=10mm, dy=10mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.31 W/kg Horizontal Up/GPRS 2 slots/Ch 190/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 37.777 V/m; Power Drift = 0.00 dB Peak SAR (extrapolated) = 1.640 mW/g SAR(1 g) = 1.11 mW/g; SAR(10 g) = 0.717 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.35 W/kg 0 dB = 1.35 W/kg = 2.61 dB W/kg Plot No. 1

Test Laboratory: UL CCS SAR Lab E Date: 10/19/2012 GSM1900 Frequency: 1909.8 MHz; Duty Cycle: 1:4; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used: f = 1910 MHz; σ = 1.557 mho/m; εr = 52.453; ρ = 1000 kg/m DASY5 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1343; Calibrated: 8/20/2012 - Probe: EX3DV4 - SN3871; ConvF(7.83, 7.83, 7.83); Calibrated: 8/20/2012; - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI v5.0 B; Type: QDOVA002AA; Serial: 1180 Horizontal Up_Repeated Test/GPRS 2 slots/Ch 810/Area Scan (10x13x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 1.47 W/kg Horizontal Up_Repeated Test/GPRS 2 slots/Ch 810/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 32.013 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 2.008 mW/g SAR(1 g) = 1.25 mW/g; SAR(10 g) = 0.736 mW/g Maximum value of SAR (measured) = 1.57 W/kg 0 dB = 1.57 W/kg = 3.92 dB W/kg Plot No. 2

Test Laboratory: UL CCS SAR Lab E Date: 10/19/2012 LTE Band 4 Frequency: 1732.5 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 1732.5 MHz; σ = 1.492 mho/m; εr = 53.157; ρ = 1000 kg/m DASY5 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1343; Calibrated: 8/20/2012 - Probe: EX3DV4 - SN3871; ConvF(8.1, 8.1, 8.1); Calibrated: 8/20/2012; - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI v5.0 B; Type: QDOVA002AA; Serial: 1180 Horizontal Up/QPSK_RB# 1, 49/Ch 20175/Area Scan (10x13x1): Measurement grid: dx=10mm, dy=10mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.11 W/kg Horizontal Up/QPSK_RB# 1, 49/Ch 20175/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 27.515 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 1.471 mW/g SAR(1 g) = 0.877 mW/g; SAR(10 g) = 0.517 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.957 W/kg 0 dB = 1.11 W/kg = 0.91 dB W/kg Plot No. 3


Document Created: 2012-11-27 18:57:27
Document Modified: 2012-11-27 18:57:27
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC