SAR Plots WCDMA Band V

FCC ID: N7NAC340U

RF Exposure Info

Download: PDF
FCCID_1866272

Test Laboratory: UL CCS SAR Lab E Date: 10/10/2012 WCDMA Band V Frequency: 826.4 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 826.4 MHz; σ = 0.969 mho/m; εr = 53.056; ρ = 1000 kg/m DASY5 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1343; Calibrated: 8/20/2012 - Probe: EX3DV4 - SN3871; ConvF(9.68, 9.68, 9.68); Calibrated: 8/20/2012; - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI v5.0 A; Type: QDOVA002AA; Serial: 1180 Horizontal-Up/Rel.99/CH 4132/Area Scan (10x13x1): Measurement grid: dx=10mm, dy=10mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.993 W/kg Horizontal-Up/Rel.99/CH 4132/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 33.088 V/m; Power Drift = -0.05 dB Peak SAR (extrapolated) = 1.294 mW/g SAR(1 g) = 0.851 mW/g; SAR(10 g) = 0.541 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.05 W/kg 0 dB = 1.05 W/kg = 0.42 dB W/kg Plot No. 1

Test Laboratory: UL CCS SAR Lab E Date: 10/10/2012 WCDMA Band V Frequency: 836.6 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.975 mho/m; εr = 52.73; ρ = 1000 kg/m DASY5 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1343; Calibrated: 8/20/2012 - Probe: EX3DV4 - SN3871; ConvF(9.68, 9.68, 9.68); Calibrated: 8/20/2012; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI v5.0 A; Type: QDOVA002AA; Serial: 1180 Horizontal-Up/Rel.99/CH4183/Area Scan (10x13x1): Measurement grid: dx=10mm, dy=10mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.03 W/kg Horizontal-Up/Rel.99/CH4183/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 34.039 V/m; Power Drift = -0.12 dB Peak SAR (extrapolated) = 1.343 mW/g SAR(1 g) = 0.885 mW/g; SAR(10 g) = 0.560 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.09 W/kg 0 dB = 1.09 W/kg = 0.75 dB W/kg Plot No. 2

Test Laboratory: UL CCS SAR Lab E Date: 10/10/2012 WCDMA Band V Frequency: 846.6 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 846.6 MHz; σ = 0.99 mho/m; εr = 52.725; ρ = 1000 kg/m DASY5 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1343; Calibrated: 8/20/2012 - Probe: EX3DV4 - SN3871; ConvF(9.68, 9.68, 9.68); Calibrated: 8/20/2012; - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI v5.0 A; Type: QDOVA002AA; Serial: 1180 Horizontal-Up/Rel.99/CH 4233/Area Scan (10x13x1): Measurement grid: dx=10mm, dy=10mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.02 W/kg Horizontal-Up/Rel.99/CH 4233/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 33.274 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 1.315 mW/g SAR(1 g) = 0.865 mW/g; SAR(10 g) = 0.546 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.06 W/kg 0 dB = 1.06 W/kg = 0.51 dB W/kg Plot No. 3

Test Laboratory: UL CCS SAR Lab E Date: 10/10/2012 WCDMA Band V Frequency: 836.6 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.975 mho/m; εr = 52.73; ρ = 1000 kg/m DASY5 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1343; Calibrated: 8/20/2012 - Probe: EX3DV4 - SN3871; ConvF(9.68, 9.68, 9.68); Calibrated: 8/20/2012; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI v5.0 A; Type: QDOVA002AA; Serial: 1180 Horizontal-Down/Rel.99/CH 4183/Area Scan (10x13x1): Measurement grid: dx=10mm, dy=10mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.709 W/kg Horizontal-Down/Rel.99/CH 4183/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 27.577 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 0.876 mW/g SAR(1 g) = 0.586 mW/g; SAR(10 g) = 0.371 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.719 W/kg 0 dB = 0.719 W/kg = -2.87 dB W/kg Plot No. 4

Test Laboratory: UL CCS SAR Lab E Date: 10/11/2012 WCDMA Band V Frequency: 836.6 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.975 mho/m; εr = 52.73; ρ = 1000 kg/m DASY5 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1343; Calibrated: 8/20/2012 - Probe: EX3DV4 - SN3871; ConvF(9.68, 9.68, 9.68); Calibrated: 8/20/2012; - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI v5.0 A; Type: QDOVA002AA; Serial: 1180 Vertical Front/Rel.99/CH 4183/Area Scan (8x12x1): Measurement grid: dx=10mm, dy=10mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.0839 W/kg Vertical Front/Rel.99/CH 4183/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 9.389 V/m; Power Drift = -0.05 dB Peak SAR (extrapolated) = 0.100 mW/g SAR(1 g) = 0.072 mW/g; SAR(10 g) = 0.050 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.0840 W/kg 0 dB = 0.0840 W/kg = -21.51 dB W/kg Plot No. 5

Test Laboratory: UL CCS SAR Lab E Date: 10/11/2012 WCDMA Band V Frequency: 836.6 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.975 mho/m; εr = 52.73; ρ = 1000 kg/m DASY5 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1343; Calibrated: 8/20/2012 - Probe: EX3DV4 - SN3871; ConvF(9.68, 9.68, 9.68); Calibrated: 8/20/2012; - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI v5.0 A; Type: QDOVA002AA; Serial: 1180 Vertical Back/Rel.99/CH 4183/Area Scan (8x12x1): Measurement grid: dx=10mm, dy=10mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.395 W/kg Vertical Back/Rel.99/CH 4183/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 21.421 V/m; Power Drift = -0.10 dB Peak SAR (extrapolated) = 0.558 mW/g SAR(1 g) = 0.338 mW/g; SAR(10 g) = 0.205 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.438 W/kg 0 dB = 0.438 W/kg = -7.17 dB W/kg Plot No. 6

Test Laboratory: UL CCS SAR Lab E Date: 10/18/2012 WCDMA Band V Frequency: 836.6 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.965 mho/m; εr = 54.201; ρ = 1000 kg/m DASY5 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1343; Calibrated: 8/20/2012 - Probe: EX3DV4 - SN3871; ConvF(9.68, 9.68, 9.68); Calibrated: 8/20/2012; - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI v5.0 A; Type: QDOVA002AA; Serial: 1180 Bottom Tip/Rel.99/CH 4183/Area Scan (11x9x1): Measurement grid: dx=10mm, dy=10mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.347 W/kg Bottom Tip/Rel.99/CH 4183/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 19.958 V/m; Power Drift = 0.00 dB Peak SAR (extrapolated) = 0.484 mW/g SAR(1 g) = 0.300 mW/g; SAR(10 g) = 0.186 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.380 W/kg 0 dB = 0.380 W/kg = -8.40 dB W/kg Plot No. 7


Document Created: 2012-11-27 17:45:39
Document Modified: 2012-11-27 17:45:39
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC