MPE Claculation

FCC ID: N7N-MHS802

RF Exposure Info

Download: PDF
FCCID_1451635

REPORT NO: 11U13729-1                                                    DATE: APRIL 14, 2011
EUT: CDMA+ WIMAX + WIFI MOBILE HOT SPOT                                     FCC ID: N7N-MHS802

8. MAXIMUM PERMISSIBLE EXPOSURE
FCC RULES

§1.1310 The criteria listed in Table 1 shall be used to evaluate the environmental impact of
human exposure to radio-frequency (RF) radiation as specified in §1.1307(b), except in the case
of portable devices which shall be evaluated according to the provisions of §2.1093 of this
chapter.




                                     Page 17 of 20
COMPLIANCE CERTIFICATION SERVICES (UL CCS)                           FORM NO: CCSUP4031B
47173 BENICIA STREET, FREMONT, CA 94538, USA     TEL: (510) 771-1000    FAX: (510) 661-0888
   This report shall not be reproduced except in full, without the written approval of UL CCS.


REPORT NO: 11U13729-1                                                      DATE: APRIL 14, 2011
EUT: CDMA+ WIMAX + WIFI MOBILE HOT SPOT                                      FCC ID: N7N-MHS802

EQUATIONS

Power density is given by:

         S = EIRP / (4 * Pi * D^2)
where
         S = Power density in W/m^2
         EIRP = Equivalent Isotropic Radiated Power in W
         D = Separation distance in m

Power density in units of W/m^2 is converted to units of mWc/m^2 by dividing by 10.


Distance is given by:

         D = SQRT (EIRP / (4 * Pi * S))
where
         D = Separation distance in m
         EIRP = Equivalent Isotropic Radiated Power in W
         S = Power density in W/m^2

In the table(s) below, Power and Gain are entered in units of dBm and dBi respectively and
conversions to linear forms are used for the calculations.


LIMITS

From FCC §1.1310 Table 1 (B), the maximum value of S = 1.0 mW/cm^2


RESULTS

                        Mode     Separation     Output Power     Antenna     FCC Power
    Bandwidth                        Distance                     Gain         Density
    Modulation
                                       (m)         (dBm)           (dBi)     (mW/cm^2)
   5MHz QPSK          WiMAX            0.20        25.58           6.00         0.286
   5MHz 16QAM         WiMAX            0.20        25.62           6.00         0.289
 10MHz QPSK           WiMAX            0.20        25.45           6.00         0.278
 10MHz 16QAM          WiMAX            0.20        25.26           6.00         0.266




                                     Page 18 of 20
COMPLIANCE CERTIFICATION SERVICES (UL CCS)                           FORM NO: CCSUP4031B
47173 BENICIA STREET, FREMONT, CA 94538, USA     TEL: (510) 771-1000    FAX: (510) 661-0888
   This report shall not be reproduced except in full, without the written approval of UL CCS.



Document Created: 2011-04-19 13:59:30
Document Modified: 2011-04-19 13:59:30

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC