10U13412-6A SAR attachment 1-2

FCC ID: N7N-MHS802

RF Exposure Info

Download: PDF
FCCID_1412545

Date/Time: 9/27/2010 11:22:11 AM Test Laboratory: Compliance Certification Services PCS 1900_Top mode DUT: Sierra Wireless; Type: NA; Serial: NA Communication System: CDMA PCS Band; Frequency: 1851.25 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 1851.25 MHz; σ = 1.45 mho/m; εr = 53.9; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.04, 8.04, 8.04); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: SAM 2 (Twin); Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 1xRTT SO32_L-ch/Area Scan (9x9x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.02 mW/g 1xRTT SO32_L-ch/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 26.7 V/m; Power Drift = 0.015 dB Peak SAR (extrapolated) = 1.31 W/kg SAR(1 g) = 0.899 mW/g; SAR(10 g) = 0.588 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.04 mW/g

Date/Time: 9/27/2010 10:18:24 AM Test Laboratory: Compliance Certification Services PCS 1900_Top mode DUT: Sierra Wireless; Type: NA; Serial: NA Communication System: CDMA PCS Band; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.48 mho/m; εr = 53.8; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.04, 8.04, 8.04); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: SAM 2 (Twin); Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 1xRTT SO32_M-ch/Area Scan (9x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.41 mW/g 1xRTT SO32_M-ch/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 30.9 V/m; Power Drift = -0.179 dB Peak SAR (extrapolated) = 1.75 W/kg SAR(1 g) = 1.2 mW/g; SAR(10 g) = 0.779 mW/g Maximum value of SAR (measured) = 1.38 mW/g

Date/Time: 9/27/2010 10:42:18 AM Test Laboratory: Compliance Certification Services PCS 1900_Top mode DUT: Sierra Wireless; Type: NA; Serial: NA Communication System: CDMA PCS Band; Frequency: 1880 MHz;Duty Cycle: 1:1 1xRTT SO32_M-ch/Z Scan (1x1x29): Measurement grid: dx=20mm, dy=20mm, dz=3.5mm Maximum value of SAR (measured) = 1.35 mW/g

Date/Time: 9/27/2010 10:43:36 AM Test Laboratory: Compliance Certification Services PCS 1900_Top mode DUT: Sierra Wireless; Type: NA; Serial: NA Communication System: CDMA PCS Band; Frequency: 1908.75 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 1908.75 MHz; σ = 1.51 mho/m; εr = 53.7; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.04, 8.04, 8.04); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: SAM 2 (Twin); Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 1xRTT SO32_H-ch/Area Scan (9x9x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.01 mW/g 1xRTT SO32_H-ch/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 25.9 V/m; Power Drift = -0.159 dB Peak SAR (extrapolated) = 1.31 W/kg SAR(1 g) = 0.879 mW/g; SAR(10 g) = 0.559 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.02 mW/g

Date/Time: 9/27/2010 9:17:05 AM Test Laboratory: Compliance Certification Services PCS 1900_Top mode DUT: Sierra Wireless; Type: NA; Serial: NA Communication System: CDMA PCS Band; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.48 mho/m; εr = 53.8; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.04, 8.04, 8.04); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: SAM 2 (Twin); Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 1xRTT SO55_M-ch/Area Scan (9x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.34 mW/g 1xRTT SO55_M-ch/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 30.7 V/m; Power Drift = -0.225 dB Peak SAR (extrapolated) = 1.69 W/kg SAR(1 g) = 1.16 mW/g; SAR(10 g) = 0.760 mW/g Maximum value of SAR (measured) = 1.35 mW/g

Date/Time: 9/27/2010 12:33:39 PM Test Laboratory: Compliance Certification Services PCS 1900_Bottom mode DUT: Sierra Wireless; Type: NA; Serial: NA Communication System: CDMA PCS Band; Frequency: 1851.25 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 1851.25 MHz; σ = 1.45 mho/m; εr = 53.9; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.04, 8.04, 8.04); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: SAM 2 (Twin); Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 1xRTT SO32_L-ch/Area Scan (9x9x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.975 mW/g 1xRTT SO32_L-ch/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 25.9 V/m; Power Drift = 0.017 dB Peak SAR (extrapolated) = 1.24 W/kg SAR(1 g) = 0.857 mW/g; SAR(10 g) = 0.564 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.995 mW/g

Date/Time: 9/27/2010 12:11:14 PM Test Laboratory: Compliance Certification Services PCS 1900_Bottom mode DUT: Sierra Wireless; Type: NA; Serial: NA Communication System: CDMA PCS Band; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.48 mho/m; εr = 53.8; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.04, 8.04, 8.04); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: SAM 2 (Twin); Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 1xRTT SO32_M-ch/Area Scan (9x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.29 mW/g 1xRTT SO32_M-ch/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 29.6 V/m; Power Drift = -0.019 dB Peak SAR (extrapolated) = 1.62 W/kg SAR(1 g) = 1.12 mW/g; SAR(10 g) = 0.731 mW/g Maximum value of SAR (measured) = 1.30 mW/g

Date/Time: 9/27/2010 12:56:34 PM Test Laboratory: Compliance Certification Services PCS 1900_Bottom mode DUT: Sierra Wireless; Type: NA; Serial: NA Communication System: CDMA PCS Band; Frequency: 1908.75 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 1908.75 MHz; σ = 1.51 mho/m; εr = 53.7; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.04, 8.04, 8.04); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: SAM 2 (Twin); Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 1xRTT SO32_H-ch/Area Scan (9x9x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.963 mW/g 1xRTT SO32_H-ch/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 24.9 V/m; Power Drift = -0.118 dB Peak SAR (extrapolated) = 1.21 W/kg SAR(1 g) = 0.797 mW/g; SAR(10 g) = 0.509 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.947 mW/g

Date/Time: 9/27/2010 2:08:36 PM Test Laboratory: Compliance Certification Services PCS 1900_Edge mode DUT: Sierra Wireless; Type: NA; Serial: NA Communication System: CDMA PCS Band; Frequency: 1851.25 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 1851.25 MHz; σ = 1.45 mho/m; εr = 53.9; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.04, 8.04, 8.04); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: SAM 2 (Twin); Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 1xRTT SO32_L-ch/Area Scan (9x9x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.710 mW/g 1xRTT SO32_L-ch/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 22.1 V/m; Power Drift = -0.178 dB Peak SAR (extrapolated) = 0.933 W/kg SAR(1 g) = 0.603 mW/g; SAR(10 g) = 0.351 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.728 mW/g

Date/Time: 9/27/2010 1:44:42 PM Test Laboratory: Compliance Certification Services PCS 1900_Edge mode DUT: Sierra Wireless; Type: NA; Serial: NA Communication System: CDMA PCS Band; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.48 mho/m; εr = 53.8; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.04, 8.04, 8.04); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: SAM 2 (Twin); Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 1xRTT SO32_M-ch/Area Scan (9x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.13 mW/g 1xRTT SO32_M-ch/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 27.5 V/m; Power Drift = -0.189 dB Peak SAR (extrapolated) = 1.43 W/kg SAR(1 g) = 0.915 mW/g; SAR(10 g) = 0.528 mW/g Maximum value of SAR (measured) = 1.10 mW/g

Date/Time: 9/27/2010 2:31:10 PM Test Laboratory: Compliance Certification Services PCS 1900_Edge mode DUT: Sierra Wireless; Type: NA; Serial: NA Communication System: CDMA PCS Band; Frequency: 1908.75 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 1908.75 MHz; σ = 1.51 mho/m; εr = 53.7; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.04, 8.04, 8.04); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: SAM 2 (Twin); Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 1xRTT SO32_H-ch/Area Scan (9x9x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.949 mW/g 1xRTT SO32_H-ch/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 25.0 V/m; Power Drift = -0.130 dB Peak SAR (extrapolated) = 1.29 W/kg SAR(1 g) = 0.784 mW/g; SAR(10 g) = 0.446 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.960 mW/g


Document Created: 2010-09-27 17:01:15
Document Modified: 2010-09-27 17:01:15
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC