10U13412-5A SAR attachment 1

FCC ID: N7N-MHS802

RF Exposure Info

Download: PDF
FCCID_1412528

Date/Time: 10/5/2010 2:50:15 PM Test Laboratory: Compliance Certification Services WiMAX_Top mode (5MHz) DUT: Sierra Wireless; Type: NA; Serial: NA Communication System: WiMAX 2.6GHz; Frequency: 2593 MHz;Duty Cycle: 1:3.24 Medium parameters used (interpolated): f = 2593 MHz; σ = 2.23 mho/m; εr = 51.7; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(7.4, 7.4, 7.4); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 5MHz_QPSK_M-ch_TX1/Area Scan (9x9x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.116 mW/g 5MHz_QPSK_M-ch_TX1/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 7.25 V/m; Power Drift = -0.177 dB Peak SAR (extrapolated) = 0.325 W/kg SAR(1 g) = 0.096 mW/g; SAR(10 g) = 0.052 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.325 mW/g

Date/Time: 10/5/2010 3:14:39 PM Test Laboratory: Compliance Certification Services WiMAX_Top mode (5MHz) DUT: Sierra Wireless; Type: NA; Serial: NA Communication System: WiMAX 2.6GHz; Frequency: 2593 MHz;Duty Cycle: 1:3.24 Medium parameters used (interpolated): f = 2593 MHz; σ = 2.23 mho/m; εr = 51.7; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(7.4, 7.4, 7.4); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 5MHz_16QAM_M-ch_TX1/Area Scan (9x9x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.112 mW/g 5MHz_16QAM_M-ch_TX1/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 7.16 V/m; Power Drift = -0.168 dB Peak SAR (extrapolated) = 0.174 W/kg SAR(1 g) = 0.093 mW/g; SAR(10 g) = 0.051 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.116 mW/g

Date/Time: 10/5/2010 11:47:51 AM Test Laboratory: Compliance Certification Services WiMAX_Top mode (10MHz) DUT: Sierra Wireless; Type: NA; Serial: NA Communication System: WiMAX 2.6GHz; Frequency: 2593 MHz;Duty Cycle: 1:3.24 Medium parameters used (interpolated): f = 2593 MHz; σ = 2.23 mho/m; εr = 51.7; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(7.4, 7.4, 7.4); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 10MHz_QPSK_M-ch_TX1/Area Scan (9x9x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.107 mW/g 10MHz_QPSK_M-ch_TX1/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 6.98 V/m; Power Drift = 0.187 dB Peak SAR (extrapolated) = 0.173 W/kg SAR(1 g) = 0.092 mW/g; SAR(10 g) = 0.050 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.112 mW/g

Date/Time: 10/5/2010 12:59:13 PM Test Laboratory: Compliance Certification Services WiMAX_Top mode (10MHz) DUT: Sierra Wireless; Type: NA; Serial: NA Communication System: WiMAX 2.6GHz; Frequency: 2593 MHz;Duty Cycle: 1:3.24 Medium parameters used (interpolated): f = 2593 MHz; σ = 2.23 mho/m; εr = 51.7; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(7.4, 7.4, 7.4); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 10MHz_16QAM_M-ch_TX1/Area Scan (9x9x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.110 mW/g 10MHz_16QAM_M-ch_TX1/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 7.08 V/m; Power Drift = -0.241 dB Peak SAR (extrapolated) = 0.167 W/kg SAR(1 g) = 0.091 mW/g; SAR(10 g) = 0.049 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.114 mW/g

Date/Time: 10/5/2010 2:01:26 PM Test Laboratory: Compliance Certification Services WiMAX_Top mode (5MHz) DUT: Sierra Wireless; Type: NA; Serial: NA Communication System: WiMAX 2.6GHz; Frequency: 2593 MHz;Duty Cycle: 1:3.24 Medium parameters used (interpolated): f = 2593 MHz; σ = 2.23 mho/m; εr = 51.7; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(7.4, 7.4, 7.4); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 5MHz_QPSK_M-ch_TX2/Area Scan (9x9x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.347 mW/g 5MHz_QPSK_M-ch_TX2/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 12.5 V/m; Power Drift = -0.098 dB Peak SAR (extrapolated) = 0.593 W/kg SAR(1 g) = 0.323 mW/g; SAR(10 g) = 0.174 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.401 mW/g

Date/Time: 10/5/2010 2:26:13 PM Test Laboratory: Compliance Certification Services WiMAX_Top mode (5MHz) DUT: Sierra Wireless; Type: NA; Serial: NA Communication System: WiMAX 2.6GHz; Frequency: 2593 MHz;Duty Cycle: 1:3.24 Medium parameters used (interpolated): f = 2593 MHz; σ = 2.23 mho/m; εr = 51.7; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(7.4, 7.4, 7.4); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 5MHz_16QAM_M-ch_TX2/Area Scan (9x9x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.333 mW/g 5MHz_16QAM_M-ch_TX2/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 12.3 V/m; Power Drift = -0.188 dB Peak SAR (extrapolated) = 0.554 W/kg SAR(1 g) = 0.306 mW/g; SAR(10 g) = 0.166 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.379 mW/g

Date/Time: 10/5/2010 12:11:42 PM Test Laboratory: Compliance Certification Services WiMAX_Top mode (10MHz) DUT: Sierra Wireless; Type: NA; Serial: NA Communication System: WiMAX 2.6GHz; Frequency: 2593 MHz;Duty Cycle: 1:3.24 Medium parameters used (interpolated): f = 2593 MHz; σ = 2.23 mho/m; εr = 51.7; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(7.4, 7.4, 7.4); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 10MHz_QPSK_M-ch_TX2/Area Scan (9x9x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.318 mW/g 10MHz_QPSK_M-ch_TX2/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 12.0 V/m; Power Drift = -0.166 dB Peak SAR (extrapolated) = 0.491 W/kg SAR(1 g) = 0.272 mW/g; SAR(10 g) = 0.148 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.336 mW/g

Date/Time: 10/5/2010 12:35:38 PM Test Laboratory: Compliance Certification Services WiMAX_Top mode (10MHz) DUT: Sierra Wireless; Type: NA; Serial: NA Communication System: WiMAX 2.6GHz; Frequency: 2593 MHz;Duty Cycle: 1:3.24 Medium parameters used (interpolated): f = 2593 MHz; σ = 2.23 mho/m; εr = 51.7; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(7.4, 7.4, 7.4); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 10MHz_16QAM_M-ch_TX2/Area Scan (9x9x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.300 mW/g 10MHz_16QAM_M-ch_TX2/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 11.6 V/m; Power Drift = -0.211 dB Peak SAR (extrapolated) = 0.480 W/kg SAR(1 g) = 0.264 mW/g; SAR(10 g) = 0.144 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.326 mW/g

Date/Time: 10/5/2010 6:29:30 PM Test Laboratory: Compliance Certification Services WiMAX_Bottom mode (5MHz) DUT: Sierra Wireless; Type: NA; Serial: NA Communication System: WiMAX 2.6GHz; Frequency: 2593 MHz;Duty Cycle: 1:3.24 Medium parameters used (interpolated): f = 2593 MHz; σ = 2.23 mho/m; εr = 52.2; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(7.4, 7.4, 7.4); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 5MHz_QPSK_M-ch_TX1/Area Scan (9x9x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.091 mW/g 5MHz_QPSK_M-ch_TX1/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 6.52 V/m; Power Drift = -0.057 dB Peak SAR (extrapolated) = 0.143 W/kg SAR(1 g) = 0.075 mW/g; SAR(10 g) = 0.041 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.095 mW/g

Date/Time: 10/5/2010 4:50:49 PM Test Laboratory: Compliance Certification Services WiMAX_Bottom mode (5MHz) DUT: Sierra Wireless; Type: NA; Serial: NA Communication System: WiMAX 2.6GHz; Frequency: 2593 MHz;Duty Cycle: 1:3.24 Medium parameters used (interpolated): f = 2593 MHz; σ = 2.23 mho/m; εr = 52.2; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(7.4, 7.4, 7.4); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 5MHz_16QAM_M-ch_TX1/Area Scan (9x9x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.098 mW/g 5MHz_16QAM_M-ch_TX1/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 6.57 V/m; Power Drift = -0.208 dB Peak SAR (extrapolated) = 0.146 W/kg SAR(1 g) = 0.075 mW/g; SAR(10 g) = 0.041 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.092 mW/g

Date/Time: 10/5/2010 6:58:03 PM Test Laboratory: Compliance Certification Services WiMAX_Bottom mode (10MHz) DUT: Sierra Wireless; Type: NA; Serial: NA Communication System: WiMAX 2.6GHz; Frequency: 2593 MHz;Duty Cycle: 1:3.24 Medium parameters used (interpolated): f = 2593 MHz; σ = 2.23 mho/m; εr = 52.2; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(7.4, 7.4, 7.4); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 10MHz_QPSK_M-ch_TX1/Area Scan (9x9x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.077 mW/g 10MHz_QPSK_M-ch_TX1/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 5.83 V/m; Power Drift = -0.164 dB Peak SAR (extrapolated) = 0.122 W/kg SAR(1 g) = 0.064 mW/g; SAR(10 g) = 0.034 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.078 mW/g

Date/Time: 10/5/2010 8:10:14 PM Test Laboratory: Compliance Certification Services WiMAX_Bottom mode (10MHz) DUT: Sierra Wireless; Type: NA; Serial: NA Communication System: WiMAX 2.6GHz; Frequency: 2593 MHz;Duty Cycle: 1:3.24 Medium parameters used (interpolated): f = 2593 MHz; σ = 2.23 mho/m; εr = 52.2; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(7.4, 7.4, 7.4); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 10MHz_16QAM_M-ch_TX1/Area Scan (9x9x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.068 mW/g 10MHz_16QAM_M-ch_TX1/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 5.57 V/m; Power Drift = -0.094 dB Peak SAR (extrapolated) = 0.112 W/kg SAR(1 g) = 0.059 mW/g; SAR(10 g) = 0.032 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.073 mW/g

Date/Time: 10/5/2010 6:06:12 PM Test Laboratory: Compliance Certification Services WiMAX_Bottom mode (5MHz) DUT: Sierra Wireless; Type: NA; Serial: NA Communication System: WiMAX 2.6GHz; Frequency: 2593 MHz;Duty Cycle: 1:3.24 Medium parameters used (interpolated): f = 2593 MHz; σ = 2.23 mho/m; εr = 52.2; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(7.4, 7.4, 7.4); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 5MHz_QPSK_M-ch_TX2/Area Scan (9x9x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.253 mW/g 5MHz_QPSK_M-ch_TX2/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 10.3 V/m; Power Drift = -0.187 dB Peak SAR (extrapolated) = 0.324 W/kg SAR(1 g) = 0.181 mW/g; SAR(10 g) = 0.104 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.261 mW/g

Date/Time: 10/5/2010 5:14:50 PM Test Laboratory: Compliance Certification Services WiMAX_Bottom mode (5MHz) DUT: Sierra Wireless; Type: NA; Serial: NA Communication System: WiMAX 2.6GHz; Frequency: 2593 MHz;Duty Cycle: 1:3.24 Medium parameters used (interpolated): f = 2593 MHz; σ = 2.23 mho/m; εr = 52.2; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(7.4, 7.4, 7.4); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 5MHz_16QAM_M-ch_TX2/Area Scan (9x9x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.179 mW/g 5MHz_16QAM_M-ch_TX2/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 8.85 V/m; Power Drift = -0.131 dB Peak SAR (extrapolated) = 0.264 W/kg SAR(1 g) = 0.149 mW/g; SAR(10 g) = 0.086 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.180 mW/g

Date/Time: 10/5/2010 7:21:52 PM Test Laboratory: Compliance Certification Services WiMAX_Bottom mode (10MHz) DUT: Sierra Wireless; Type: NA; Serial: NA Communication System: WiMAX 2.6GHz; Frequency: 2593 MHz;Duty Cycle: 1:3.24 Medium parameters used (interpolated): f = 2593 MHz; σ = 2.23 mho/m; εr = 52.2; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(7.4, 7.4, 7.4); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 10MHz_QPSK_M-ch_TX2/Area Scan (9x9x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.165 mW/g 10MHz_QPSK_M-ch_TX2/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 8.61 V/m; Power Drift = -0.090 dB Peak SAR (extrapolated) = 0.249 W/kg SAR(1 g) = 0.141 mW/g; SAR(10 g) = 0.082 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.170 mW/g

Date/Time: 10/5/2010 7:45:43 PM Test Laboratory: Compliance Certification Services WiMAX_Bottom mode (10MHz) DUT: Sierra Wireless; Type: NA; Serial: NA Communication System: WiMAX 2.6GHz; Frequency: 2593 MHz;Duty Cycle: 1:3.24 Medium parameters used (interpolated): f = 2593 MHz; σ = 2.23 mho/m; εr = 52.2; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(7.4, 7.4, 7.4); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 10MHz_16QAM_M-ch_TX2/Area Scan (9x9x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.160 mW/g 10MHz_16QAM_M-ch_TX2/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 8.48 V/m; Power Drift = -0.016 dB Peak SAR (extrapolated) = 0.245 W/kg SAR(1 g) = 0.139 mW/g; SAR(10 g) = 0.081 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.168 mW/g

Date/Time: 10/5/2010 9:43:55 AM Test Laboratory: Compliance Certification Services WiMAX_Edge mode (5MHz) DUT: Sierra Wireless; Type: NA; Serial: NA Communication System: WiMAX 2.6GHz; Frequency: 2593 MHz;Duty Cycle: 1:3.24 Medium parameters used (interpolated): f = 2593 MHz; σ = 2.23 mho/m; εr = 51.7; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(7.4, 7.4, 7.4); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 5MHz_QPSK_M-ch_TX1/Area Scan (7x7x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.078 mW/g 5MHz_QPSK_M-ch_TX1/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 5.94 V/m; Power Drift = 0.165 dB Peak SAR (extrapolated) = 0.151 W/kg SAR(1 g) = 0.082 mW/g; SAR(10 g) = 0.042 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.103 mW/g

Date/Time: 10/5/2010 10:05:48 AM Test Laboratory: Compliance Certification Services WiMAX_Edge mode (5MHz) DUT: Sierra Wireless; Type: NA; Serial: NA Communication System: WiMAX 2.6GHz; Frequency: 2593 MHz;Duty Cycle: 1:3.24 Medium parameters used (interpolated): f = 2593 MHz; σ = 2.23 mho/m; εr = 51.7; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(7.4, 7.4, 7.4); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 5MHz_16QAM_M-ch_TX1/Area Scan (7x7x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.151 mW/g 5MHz_16QAM_M-ch_TX1/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 8.59 V/m; Power Drift = 0.217 dB Peak SAR (extrapolated) = 0.302 W/kg SAR(1 g) = 0.168 mW/g; SAR(10 g) = 0.087 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.210 mW/g

Date/Time: 9/23/2010 7:13:25 PM Test Laboratory: Compliance Certification Services WiMAX_Edge mode (10MHz) DUT: Sierra Wireless; Type: NA; Serial: NA Communication System: WiMAX 2.6GHz; Frequency: 2593 MHz;Duty Cycle: 1:3.24 Medium parameters used (interpolated): f = 2593 MHz; σ = 2.23 mho/m; εr = 52.2; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(7.4, 7.4, 7.4); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 10MHz_16QAM_M-ch_TX1/Area Scan (7x7x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.217 mW/g 10MHz_16QAM_M-ch_TX1/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 9.95 V/m; Power Drift = -0.180 dB Peak SAR (extrapolated) = 0.330 W/kg SAR(1 g) = 0.177 mW/g; SAR(10 g) = 0.091 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.222 mW/g

Date/Time: 9/23/2010 7:13:25 PM Test Laboratory: Compliance Certification Services WiMAX_Edge mode (10MHz) DUT: Sierra Wireless; Type: NA; Serial: NA Communication System: WiMAX 2.6GHz; Frequency: 2593 MHz;Duty Cycle: 1:3.24 Medium parameters used (interpolated): f = 2593 MHz; σ = 2.23 mho/m; εr = 52.2; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(7.4, 7.4, 7.4); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 10MHz_16QAM_M-ch_TX1/Area Scan (7x7x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.217 mW/g 10MHz_16QAM_M-ch_TX1/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 9.95 V/m; Power Drift = -0.180 dB Peak SAR (extrapolated) = 0.330 W/kg SAR(1 g) = 0.177 mW/g; SAR(10 g) = 0.091 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.222 mW/g

Date/Time: 9/23/2010 5:41:59 PM Test Laboratory: Compliance Certification Services WiMAX_Edge mode (5MHz) DUT: Sierra Wireless; Type: NA; Serial: NA Communication System: WiMAX 2.6GHz; Frequency: 2593 MHz;Duty Cycle: 1:3.24 Medium parameters used (interpolated): f = 2593 MHz; σ = 2.23 mho/m; εr = 52.2; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(7.4, 7.4, 7.4); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 5MHz_QPSK_M-ch_TX2/Area Scan (7x7x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.496 mW/g 5MHz_QPSK_M-ch_TX2/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 15.1 V/m; Power Drift = -0.150 dB Peak SAR (extrapolated) = 0.754 W/kg SAR(1 g) = 0.408 mW/g; SAR(10 g) = 0.217 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.501 mW/g

Date/Time: 9/23/2010 6:04:51 PM Test Laboratory: Compliance Certification Services WiMAX_Edge mode (5MHz) DUT: Sierra Wireless; Type: NA; Serial: NA Communication System: WiMAX 2.6GHz; Frequency: 2593 MHz;Duty Cycle: 1:3.24 Medium parameters used (interpolated): f = 2593 MHz; σ = 2.23 mho/m; εr = 52.2; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(7.4, 7.4, 7.4); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 5MHz_16QAM_M-ch_TX2/Area Scan (7x7x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.492 mW/g 5MHz_16QAM_M-ch_TX2/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 15.0 V/m; Power Drift = -0.063 dB Peak SAR (extrapolated) = 0.781 W/kg SAR(1 g) = 0.409 mW/g; SAR(10 g) = 0.217 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.504 mW/g

Date/Time: 9/23/2010 6:25:20 PM Test Laboratory: Compliance Certification Services WiMAX_Edge mode (5MHz) DUT: Sierra Wireless; Type: NA; Serial: NA Communication System: WiMAX 2.6GHz; Frequency: 2593 MHz;Duty Cycle: 1:3.24 5MHz_16QAM_M-ch_TX2/Z Scan (1x1x29): Measurement grid: dx=20mm, dy=20mm, dz=3.5mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.510 mW/g

Date/Time: 9/23/2010 6:50:33 PM Test Laboratory: Compliance Certification Services WiMAX_Edge mode (10MHz) DUT: Sierra Wireless; Type: NA; Serial: NA Communication System: WiMAX 2.6GHz; Frequency: 2593 MHz;Duty Cycle: 1:3.24 Medium parameters used (interpolated): f = 2593 MHz; σ = 2.23 mho/m; εr = 52.2; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(7.4, 7.4, 7.4); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 10MHz_QPSK_M-ch_TX2/Area Scan (7x7x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.417 mW/g 10MHz_QPSK_M-ch_TX2/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 13.8 V/m; Power Drift = -0.241 dB Peak SAR (extrapolated) = 0.643 W/kg SAR(1 g) = 0.347 mW/g; SAR(10 g) = 0.185 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.432 mW/g

Date/Time: 9/23/2010 6:29:05 PM Test Laboratory: Compliance Certification Services WiMAX_Edge mode (10MHz) DUT: Sierra Wireless; Type: NA; Serial: NA Communication System: WiMAX 2.6GHz; Frequency: 2593 MHz;Duty Cycle: 1:3.24 Medium parameters used (interpolated): f = 2593 MHz; σ = 2.23 mho/m; εr = 52.2; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(7.4, 7.4, 7.4); Calibrated: 2/23/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 10MHz_16QAM_M-ch_TX2/Area Scan (7x7x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.420 mW/g 10MHz_16QAM_M-ch_TX2/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 13.8 V/m; Power Drift = -0.161 dB Peak SAR (extrapolated) = 0.639 W/kg SAR(1 g) = 0.346 mW/g; SAR(10 g) = 0.184 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.431 mW/g

Date/Time: 9/23/2010 6:59:12 PM Test Laboratory: Compliance Certification Services WiMAX_Edge mode (10MHz) DUT: Sierra Wireless; Type: NA; Serial: NA Communication System: WiMAX 2.6GHz; Frequency: 2593 MHz;Duty Cycle: 1:3.24 10MHz_16QAM_M-ch_TX2/Z Scan (1x1x29): Measurement grid: dx=20mm, dy=20mm, dz=3.5mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.499 mW/g


Document Created: 2010-10-15 13:34:13
Document Modified: 2010-10-15 13:34:13
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC