Manual 7

FCC ID: N6C-SX10WAG

Users Manual

Download: PDF
FCCID_853251

$00_WT-4_En.book Page 115 Friday, August 10, 2007 2:02 PM 4 Enter an IP address and sub-net mask for the ftp server and click [OK]. Creating an ftp Server / Windows XP 5 Go to the [System and Maintenance] > [Administrative Tools] control panel and open the [Internet Information Services] console. 6 Right-click [Default FTP Site] and select [Properties] from the menu that appears. Operating the WT-4 for FTP 115

$00_WT-4_En.book Page 116 Friday, August 10, 2007 2:02 PM 7 Select the IP address entered in Step 4 and enter a [TCP Port] number. The port number is normally 21. Creating an ftp Server / Windows XP 8 Open the [Home Directory] tab and select [a directory located on this computer]. The root directory for images uploaded to the ftp server is listed in the [Local Path] text box; choose a folder and select [Read], [Write], and [Log visits]. Click [OK] to close the properties dialog. This completes ftp server setup. Proceed to “Copying Network Profiles to the Camera” (pg.119). 116 Operating the WT-4 for FTP

$00_WT-4_En.book Page 117 Friday, August 10, 2007 2:02 PM Macintosh 1 Open [System Preferences] and click [Network]. Creating an ftp Server / Macintosh 2 Select [AirPort] from the [Show] menu. 3 Select [Manually] from the [Configure IPv4] menu and enter an IP address and sub-net mask. Make a note of this address. It will be needed to set up the WT-4. Operating the WT-4 for FTP 117

$00_WT-4_En.book Page 118 Friday, August 10, 2007 2:02 PM 4 Click [Show All] to return to the System Preferences dialog. Creating an ftp Server / Macintosh 5 Click [Sharing]. 6 Select [Services] and enable [FTP Access]. This completes ftp server setup. Proceed to “Copying Network Profiles to the Camera” (pg.119). 118 Operating the WT-4 for FTP

$00_WT-4_En.book Page 119 Friday, August 10, 2007 2:02 PM Copying Network Profiles to the Camera Copying Network Profiles to the Camera / Ad Hoc Networks Ad Hoc Networks 1 Connect the UC-E4 as shown below. 2 Turn the camera on. Power switch MMY 3 Turn the computer on and start the WT-4 Setup Utility. • Windows: Double-click the [WT-4 Setup Utility] icon on the desktop • Macintosh: Click the [WT-4WirelessSetup] icon in the Dock. Operating the WT-4 for FTP 119

$00_WT-4_En.book Page 120 Friday, August 10, 2007 2:02 PM 4 The dialog shown below will be displayed; click [Next]. Copying Network Profiles to the Camera / Ad Hoc Networks 5 Select [Add/Edit profiles] and click [Next]. 120 Operating the WT-4 for FTP

$00_WT-4_En.book Page 121 Friday, August 10, 2007 2:02 PM 6 Select [Add new profile] and click [Next]. Copying Network Profiles to the Camera / Ad Hoc Networks 7 Enter the following information and click [Next]: • Profile name: Enter a name of up to 16 characters. • Profile type: Choose [FTP Server]. • Interface type: Choose [Wireless & Ethernet] for networks that include wireless, or [Ethernet only] for Ethernet-only networks. Operating the WT-4 for FTP 121

hn n n en e n n n ngea se n n en 65 wr—a Seup Viry 5)0 Es Wikon. CTeeup _ sy1omjap JoH py / eraurey ayy1 01 sajjoug yom1an Buidoy Select setup method Snwfi im nvonls ols sn sedoas ts it se imariing C Atonsteseup feconmentad) | | | | ds tss

$00_WT-4_En.book Page 123 Friday, August 10, 2007 2:02 PM 9 Enter the following information and click [Next]. • Network name (SSID): Enter a network name or choose from a list of existing networks. Do not change the name if it is Copying Network Profiles to the Camera / Ad Hoc Networks supplied automatically. • Network type: Select [Ad hoc]. • Channel: Select a communication channel. However, if the network name (SSID) is consistent, a predetermined channel separate from the channel set here may be applied. • Authentication: Choose the type of authentication used on the network. In ad-hoc mode, the camera supports open system and shared key authentication. • Encryption: The type of encryption used on the network. Choose from [None] (open networks only), 64-bit WEP, and 128-bit WEP. • Encryption key: If the network uses encryption, enter the network key. The number of characters required depends on the type of key used: WEP (64-bit) WEP (128-bit) Number of characters (ASCII) 5 13 Number of characters (hex) 10 26 • Key Index: Set the key index when [WEP64] or [WEP128] is set for [Encryption]. The default index is [1]. Setting the key index is not necessary when [No encryption] was selected for [Encryption]. Operating the WT-4 for FTP 123

To Wt Seup y (=] o s Wikon. ((Il) Setup Wireloss settings sy1omjap JoH py / eraurey ayy1 01 sajjoug yom1an Buidoy Ievotcone G50) firra Commneatonnode [Zétee = Chamea = Atbericaton [oren Breopten [nesee Erenptentey 1 Gatwaces) Keyrdis iz io dask se

$00_WT-4_En.book Page 125 Friday, August 10, 2007 2:02 PM 10 Enter the following information and click [Next]. • Obtain IP address automatically: Select this option if the network is configured to supply IP addresses automatically. If the Copying Network Profiles to the Camera / Ad Hoc Networks network does not include a DHCP server, addresses will be supplied by Auto IP (pg.180). • IP address: If the network is configured for manual IP addressing, enter an IP address for the WT-4. • Subnet mask: If the network is configured for manual IP addressing, enter a subnet mask for the WT-4. • Default gateway: If the network requires a gateway address, select this option and enter the address supplied by the network administrator. This option applies only if [FTP server] is selected for Profile type in Step 7. • DNS Server: If a Domain Name Server exists on the network, select this option and enter the address supplied by the network administrator. This option applies only if [FTP server] is selected for Profile type in Step 7. Operating the WT-4 for FTP 125

$00_WT-4_En.book Page 126 Friday, August 10, 2007 2:02 PM 11 Enter ftp settings and click [Next]. • FTP server: Enter the URL or IP address of the ftp server. • FTP server port: Enter the port number for the ftp server. The Copying Network Profiles to the Camera / Ad Hoc Networks default port is 21. • FTP path: Choose the folder to which pictures will be uploaded. If no path is specified, pictures will be uploaded to the home directory. • Anonymous login: Select this option for anonymous login, or leave this option unchecked to supply a [User ID] and [Password]. • Use proxy server: If a proxy server is required for ftp, select this option and enter the server name and port number for the proxy server. • PASV mode: Select this option to use PASV mode. 126 Operating the WT-4 for FTP

$00_WT-4_En.book Page 127 Friday, August 10, 2007 2:02 PM 12 Confirm that settings are correct and click [Next]. Copying Network Profiles to the Camera / Ad Hoc Networks 13 Select [Finish wizard] and click [Next]. Operating the WT-4 for FTP 127

$00_WT-4_En.book Page 128 Friday, August 10, 2007 2:02 PM 14 Turn the camera off and disconnect the USB cable. UMMY Copying Network Profiles to the Camera / Ad Hoc Networks The network profile has now been copied to the camera. Proceed to “Connecting to the FTP Server” (pg.140). 128 Operating the WT-4 for FTP

$00_WT-4_En.book Page 129 Friday, August 10, 2007 2:02 PM Infrastructure Networks 1 Connect the UC-E4 as shown below. Copying Network Profiles to the Camera / Infrastructure Networks 2 Turn the camera on. Power switch MMY 3 Turn the computer on and start the WT-4 Setup Utility. • Windows: Double-click the [WT-4 Setup Utility] icon on the desktop • Macintosh: Click the [WT-4WirelessSetup] icon in the Dock. Operating the WT-4 for FTP 129

$00_WT-4_En.book Page 130 Friday, August 10, 2007 2:02 PM 4 The dialog shown below will be displayed; click [Next]. Copying Network Profiles to the Camera / Infrastructure Networks 5 Select [Add/Edit profile] and click [Next]. 130 Operating the WT-4 for FTP

$00_WT-4_En.book Page 131 Friday, August 10, 2007 2:02 PM 6 Select [Add new profile] and click [Next]. Copying Network Profiles to the Camera / Infrastructure Networks 7 Enter the following information and click [Next]: • Profile name: Enter a name of up to 16 characters. • Profile type: Choose [FTP Server]. • Interface type: Choose [Wireless & Ethernet] for networks that include wireless, or [Ethernet only] for Ethernet-only networks. Operating the WT-4 for FTP 131

sns oooa 65 wr—a Seup Viry 5)0 Es Wikon. CTeeup _ SOMJoN sInjOMUJseEIjUj / Eroweo ay1 0J sa[IJOiq »UOM1aN DUIAGOY Select setup method Snwfi im nvonls ols sn sedoas ts it se imariing C Atonsteseup feconmentad) | | | | ds tss

$00_WT-4_En.book Page 133 Friday, August 10, 2007 2:02 PM A “Automatic Setup” Choose [Automatic setup (recommended)] when using a new network for the first time. The following dialog will be displayed; if multiple infrastructure networks have been setup, select a setting Copying Network Profiles to the Camera / Infrastructure Networks which will be used for network connection and click [Next]. to proceed to Step 11 (pg.137). [Automatic setup] cannot be selected in the following cases: • When editing a preset network • When using a third party network adapter • When the computer network is set to a static IP address • When the OS is Windows XP SP1 or Mac OSX Operating the WT-4 for FTP 133

$00_WT-4_En.book Page 134 Friday, August 10, 2007 2:02 PM 9 Enter the following information and click [Next]. • Network name (SSID): Enter a network name or choose from a list of existing networks. Do not change the name if it is Copying Network Profiles to the Camera / Infrastructure Networks supplied automatically. • Network type: Select [Infrastructure (access point)]. • Authentication: Choose the authentication used on the network. In infrastructure mode, the camera supports WPA- PSK, WPA2-PSK, open system, and shared key authentication. • Encryption: Choose the encryption used on the network. The options available depend on the authentication used: Open: None, 64- or 128-bit WEP Shared: 64- or 128-bit WEP WPA-PSK: TKIP, AES WPA2-PSK: AES • Encryption key: If the network uses encryption, enter the network key. The number of characters required depends on the type of key used: WEP (64-bit) WEP (128-bit) TKIP, AES Number of characters (ASCII) 5 13 8–63 Number of characters (hex) 10 26 64 • Key Index: Set the key index when [WEP64] or [WEP128] is set for [Encryption]. The default index is [1]. Setting the key index is not necessary when [No encryption] was selected for [Encryption]. 134 Operating the WT-4 for FTP

65 wr—aSaup Viry (=] 0 es Wikon. ((II) Setup Wireloss settings syjomjap einjorujseuj / erowey ay1 o1 sejyoug Jomiap bundoy Ievodcrone G50) [ia Cmnstmet [Henc®) Clme m3 Aubsrtcaton [WekPSR Erepten ree=] Erenptentey [ (ostsacen) feyrin 3 o es

$00_WT-4_En.book Page 136 Friday, August 10, 2007 2:02 PM 10 Enter the following information and click [Next]. • Obtain IP address automatically: Select this option if the network is configured to supply IP addresses automatically. If the Copying Network Profiles to the Camera / Infrastructure Networks network does not include a DHCP server, addresses will be supplied by Auto IP (pg.180). • IP address: If the network is configured for manual IP addressing, enter an IP address for the WT-4. • Subnet mask: If the network is configured for manual IP addressing, enter a subnet mask for the WT-4. • Default gateway: If the network requires a gateway address, select this option and enter the address supplied by the network administrator. This option applies only if [FTP server] is selected for Profile type in Step 7. • DNS Server: If a Domain Name Server exists on the network, select this option and enter the address supplied by the network administrator. This option applies only if [FTP server] is selected for Profile type in Step 7. 136 Operating the WT-4 for FTP

$00_WT-4_En.book Page 137 Friday, August 10, 2007 2:02 PM 11 Enter ftp settings and click [Next]. • FTP server: Enter the URL or IP address of the ftp server. • FTP server port: Enter the port number for the ftp server. The Copying Network Profiles to the Camera / Infrastructure Networks default port is 21. • FTP path: Choose the folder to which pictures will be uploaded. If no path is specified, pictures will be uploaded to the home directory. • Anonymous login: Select this option for anonymous login, or leave this option unchecked to supply a [User ID] and [Password]. • Use proxy server: If a proxy server is required for ftp, select this option and enter the server name and port number for the proxy server. • PASV mode: Select this option to use PASV mode. Operating the WT-4 for FTP 137

$00_WT-4_En.book Page 138 Friday, August 10, 2007 2:02 PM 12 Confirm that settings are correct and click [Next]. Copying Network Profiles to the Camera / Infrastructure Networks 13 Select [Finish wizard] and click [Next]. 138 Operating the WT-4 for FTP

$00_WT-4_En.book Page 139 Friday, August 10, 2007 2:02 PM 14 Turn the camera off and disconnect the USB cable. UMMY Copying Network Profiles to the Camera / Infrastructure Networks The network profile has now been copied to the camera. Proceed to “Connecting to the FTP Server” (pg.140). Operating the WT-4 for FTP 139


Document Created: 2007-10-05 11:10:06
Document Modified: 2007-10-05 11:10:06
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC