Manual 6

FCC ID: N6C-SX10WAG

Users Manual

Download: PDF
FCCID_853250

$00_WT-4_En.book Page 90 Friday, August 10, 2007 2:02 PM PC Mode In PC mode, a camera equipped with a WT-4 can be controlled PC Mode / Connecting to the Computer over a wireless or Ethernet network from a computer running Camera Control Pro 2 (available separately) and photographs saved directly to the computer hard disk instead of the camera memory card. Connecting to the Computer Before connecting the WT-4, select [MTP/PTP] for the [USB] option in the camera setup menu (pg.7) and confirm that the host computer is running. 1 Turn the camera off. To access the network via Ethernet, connect the Ethernet cable (pg.2). Note that wireless transfer is disabled while an Ethernet cable is connected. Disconnect the Ethernet cable before accessing a wireless network. Turn the WT-4 off before connecting or disconnecting the Ethernet cable. 2 Open the WT-4 USB connector cover and connect the USB cable from the WT-4 to the camera USB connector. 3 Turn the camera on. UMMY 90 Operating the WT-4 for Computer

$00_WT-4_En.book Page 91 Friday, August 10, 2007 2:02 PM 4 Select [PC mode] for the [Wireless transmitter] > [Mode] option in the camera setup menu (pg.152). PC Mode / Connecting to the Computer 5 A list of available connection profiles will be displayed. Highlight the desired profile and press J. C Viewing Profile Information Press the camera L (?) button to view information on the selected profile. 6 Turn on the WT-4. Power switch 7 The message “Now in PC mode” will be displayed in the top level of the wireless transmitter menu when a connection is established. For information on what to do if an error is displayed, see “Troubleshooting” (pp.178). Operating the WT-4 for Computer 91

$00_WT-4_En.book Page 92 Friday, August 10, 2007 2:02 PM A Using the Windows Vista Ad-hoc Connection To use the Windows Vista ad-hoc connection, turn on the WT-4 and conduct the following steps on your computer. 1 PC Mode / Connecting to the Computer Click the [Start] and select [Connect To]. 2 Select a preset network name and click [Connet]. 92 Operating the WT-4 for Computer

$00_WT-4_En.book Page 93 Friday, August 10, 2007 2:02 PM 3 Enter the network security key and click [Connect]. PC Mode / Connecting to the Computer 4 Click [Close]. Operating the WT-4 for Computer 93

$00_WT-4_En.book Page 94 Friday, August 10, 2007 2:02 PM Controlling the Camera 1 Complete the steps in “Connecting to the Computer” (pp.90– 93). PC Mode / Controlling the Camera 2 Start Camera Control Pro 2 on the host computer and confirm that “PC” is displayed in the camera control panel. 3 Control the camera as described in the Camera Control Pro 2 manual. Any photographs taken while the camera is connected will be recorded directly to the computer hard disk. 4 Turn off the WT-4 When the POWER LED (pg.3) changes from green to yellow and then goes out, detach the USB cable. D Wireless Networking Compared with Ethernet networking, wireless networking may involve time delays between operations. D Ethernet Networks: Do Not Disconnect the Ethernet Cable Do not disconnect the Ethernet cable while the camera is on. A Wireless Networks: Loss of Signal During Transfer A loss of signal may interrupt the connection while pictures are being transferred to Camera Control Pro 2. If the POWER LED on the WT-4 is blinking (pg.2), turn the WT-4 off and then on again. Transfer will resume when the connection is re-established. Do not turn the camera off. Transfer can not be resumed once the camera has been turned off. 94 Operating the WT-4 for Computer

$00_WT-4_En.book Page 95 Friday, August 10, 2007 2:02 PM ❏ Network Status The status of the link between the host and the WT-4 is shown by the status LEDs and by the display in the top level of the wireless transmitter menu. PC Mode / Controlling the Camera The Status LEDs The POWER LED lights when the WT-4 is on. Status LEDs Signal quality is shown by the LINK LED: the faster the LED blinks, the better the signal and the faster data can be transmitted. The ERROR LED blinks to show that an error has occurred. Status POWER LINK ERROR WT-4 off I (off ) I (off ) I (off ) USB cable not connected K (on) I (off ) I (off ) Connecting to host K (on) K (on) I (off ) Waiting to send or sending data K (on) H (blinks) I (off ) Connection error H (blinks) I (off ) H (blinks) WT-4 hardware or battery malfunction H (blinks) H (blinks) H (blinks) Operating the WT-4 for Computer 95

$00_WT-4_En.book Page 96 Friday, August 10, 2007 2:02 PM The Status Display Network status can also be viewed in the top level of the wireless transmitter menu. PC Mode / Controlling the Camera Status area: The status of the connection to the host. The host name is displayed in green when a connection is established. Any errors that prevent the camera from connecting to the host are also displayed here. Battery level: This icon shows five level of Signal strength: This icon shows wireless WT-4 battery level. signal strength. It is displayed in red when no signal can be detected. For maximum signal strength, ensure a clear line of sight between the WT-4 antenna and the wireless LAN adapter or access point. A d icon is displayed when the WT-4 is connected via Ethernet. 96 Operating the WT-4 for Computer

$00_WT-4_En.book Page 97 Friday, August 10, 2007 2:02 PM Print Mode Print mode allows you to print JPEG pictures taken with your Print Mode / Copying Network Profiles to the Camera camera from a printer connected to a network computer via the WT-4. The printer normally used with your computer is set as the printer which will be operated via the WT-4. To configure a different printer, conduct the following steps (to change the settings to a different printer, it is not necessary to use a USB cable to connect the camera to your computer). The computer’s OS settings will be applied for print quality and paper type at the time wireless transmission is configured. To change these settings, conduct step 4 for Macintosh; for Windows, change the OS printer settings before printing. Copying Network Profiles to the Camera 1 Turn the computer on and start the WT-4 Setup Utility. • Windows: Double-click the [WT-4 Setup Utility] icon on the desktop • Macintosh: Click the [WT-4WirelessSetup] icon in the Dock. Operating the WT-4 for Computer 97

$00_WT-4_En.book Page 98 Friday, August 10, 2007 2:02 PM 2 The dialog shown below will be displayed; click [Next]. Print Mode / Copying Network Profiles to the Camera 3 Select [Setup wireless printer] and click [Next]. 98 Operating the WT-4 for Computer

$00_WT-4_En.book Page 99 Friday, August 10, 2007 2:02 PM 4 Choose a printer and click [Next]. • Windows: Select a printer from the pull-down menu. Print Mode / Copying Network Profiles to the Camera Operating the WT-4 for Computer 99

$00_WT-4_En.book Page 100 Friday, August 10, 2007 2:02 PM • Macintosh: Click [Select Printer…]. Print Mode / Copying Network Profiles to the Camera The following dialog will be displayed; choose a printer and adjust printer settings. Click [Print] to return to the WT-4 setup utility. 100 Operating the WT-4 for Computer

$00_WT-4_En.book Page 101 Friday, August 10, 2007 2:02 PM 5 Select [Finish wizard] and click [Next]. Print Mode / Copying Network Profiles to the Camera The network profile has now been copied to the camera. Operating the WT-4 for Computer 101

$00_WT-4_En.book Page 102 Friday, August 10, 2007 2:02 PM Printing Pictures Before connecting the WT-4, select [MTP/PTP] for the [USB] option in the camera setup menu (pg.7) and confirm that the host Print Mode / Printing Pictures computer is running and that the printer is on. 1 Turn the camera off and insert the DUMMY memory card containing the pictures to be sent. • If there are multiple card slots, insert the card into any slot. Front To access the network via Ethernet, connect the Ethernet cable (pg.2). Note that wireless transfer is disabled while an Ethernet cable is connected. Disconnect the Ethernet cable before accessing a wireless network. Turn the WT-4 off before connecting or disconnecting the Ethernet cable. 2 Open the WT-4 USB connector cover and connect the USB cable from the WT-4 to the camera USB connector. 3 Turn the camera on. UMMY 4 Select [Print mode] for the [Wireless transmitter] > [Mode] option in the camera setup menu (pg.152). 102 Operating the WT-4 for Computer

$00_WT-4_En.book Page 103 Friday, August 10, 2007 2:02 PM 5 A list of available printer profiles will be displayed. Highlight the desired profile, then press J to select and return to the Print Mode / Printing Pictures top level of the wireless transmitter menu. A Viewing Profile Information Press the camera L (?) button to view information on the selected profile. 6 Turn on the WT-4. Power switch 7 Select [Print] in the top level of the [Wireless Transmitter] menu to connect to the printer. The status LEDs will light as a connection is negotiated with the printer. 8 Print photographs from the [Print] menu as described in the camera manual. Operating the WT-4 for Computer 103

$00_WT-4_En.book Page 104 Friday, August 10, 2007 2:02 PM 9 Turn off the WT-4 When the POWER LED (pg.3) changes from green to yellow and then goes Print Mode / Printing Pictures out, detach the USB cable. A Restrictions to Print Mode • RAW images or TIFF images cannot be printed using the WT-4 print mode. To print RAW images and TIFF images, first send them to your computer, then print them using the ViewNX software supplied with your camera or other separately-sold software such as Capture NX. • The Index print function cannot be used. • The playback screen will not appear even if the camera’s K button is pressed. A The Status LEDs The POWER LED lights when the WT-4 is on. Signal quality is shown by the LINK LED: the faster the LED blinks, the better the signal and the faster data can be transmitted. The ERROR LED blinks to show that an error has occurred. Status POWER LINK ERROR WT-4 off I (off ) I (off ) I (off ) Connected to printer; pictures can be K (on) H (blinks) I (off ) printed Error connecting to printer K (on) I (off ) H (blinks) WT-4 hardware or battery malfunction H (blinks) H (blinks) H (blinks) 104 Operating the WT-4 for Computer

$00_WT-4_En.book Page 105 Friday, August 10, 2007 2:02 PM A Using the Windows Vista Ad-hoc Connection To use the Windows Vista ad-hoc connection, turn on the WT-4 and conduct the following steps on your computer. 1 Print Mode / Printing Pictures Click the [Start] and select [Connect To]. 2 Select a preset network name and click [Connet]. Operating the WT-4 for Computer 105

$00_WT-4_En.book Page 106 Friday, August 10, 2007 2:02 PM 3 Enter the network security key and click [Connect]. Print Mode / Printing Pictures 4 Click [Close]. 106 Operating the WT-4 for Computer

$00_WT-4_En.book Page 107 Friday, August 10, 2007 2:02 PM Operating the WT-4 for FTP Follow the steps below to upload pictures to an ftp server over wireless or Ethernet networks. 1 Creating an ftp Server (pg.108) • Windows Vista (pg.108) • Windows XP (pg.114) • Macintosh (pg.117) 2 Copying Network Profiles to the Camera (pg.119) • Ad Hoc Networks (pg.119) • Infrastructure Networks (pg.129) 3 Connecting to the FTP Server (pg.140) 4 Uploading Images (pg.145) Operating the WT-4 for FTP 107

$00_WT-4_En.book Page 108 Friday, August 10, 2007 2:02 PM Creating an ftp Server The WT-4 can be used to upload pictures to ftp servers created Creating an ftp Server / Windows Vista using standard ftp services included with Windows Vista (32-bit Ultimate/Business/Enterprise editions), Windows XP Professional (Service Pack 1 or later), and Mac OS X (version 10.3.9 or version 10.4.10). Under Windows, Internet Information Services (IIS) are required to configure ftp servers (IIS is included in the standard install of Windows Vista Ultimate, Windows Vista Business, Windows Vista Enterprise, and Windows XP Professional; for information, contact Microsoft). Mac OS X versions 10.3.9 and 10.4.10 also support ftp services. Be sure to use characters supported by the WT-4 (pg.153) when specifying such settings as user ID, password, and folder names. Windows Vista 1 Open the > [Network and Internet] > [Network and Sharing Center] control panel. 2 Select [Manage network connetctions]. 108 Operating the WT-4 for FTP

$00_WT-4_En.book Page 109 Friday, August 10, 2007 2:02 PM 3 Right-click the [Wireless Network Connection] icon and select [Properties] from the menu that appears. Creating an ftp Server / Windows Vista 4 A “User Account Control” dialog will be displayed; click [Allow]. 5 Select [Internet Protocol Version 4 (TCP/IPv4)] and click [Properties]. Operating the WT-4 for FTP 109

$00_WT-4_En.book Page 110 Friday, August 10, 2007 2:02 PM 6 Enter an IP address and sub-net mask for the ftp server and click [OK]. Creating an ftp Server / Windows Vista 7 Go to the [System and Maintenance] > [Administrative Tools] control panel. 8 Double-click [IIS6 Manager]. 9 A “User Account Control” dialog will be displayed; click [Allow]. 110 Operating the WT-4 for FTP

$00_WT-4_En.book Page 111 Friday, August 10, 2007 2:02 PM 10 Right-click [Default FTP Site] and select [Properties] from the menu that appears. Creating an ftp Server / Windows Vista Operating the WT-4 for FTP 111

$00_WT-4_En.book Page 112 Friday, August 10, 2007 2:02 PM 11 Select the IP address entered in Step 6 and enter a [TCP port] number. The port number is normally 21. Creating an ftp Server / Windows Vista 112 Operating the WT-4 for FTP

$00_WT-4_En.book Page 113 Friday, August 10, 2007 2:02 PM 12 Open the [Home Directory] tab and select [A directory located on this computer]. The root directory for images uploaded to the ftp server is listed in the [Local path] text box; choose a Creating an ftp Server / Windows Vista folder and select [Read], [Write], and [Log visits]. Click [OK] to close the properties dialog. This completes ftp server setup. Proceed to “Copying Network Profiles to the Camera” (pg.119). Operating the WT-4 for FTP 113

$00_WT-4_En.book Page 114 Friday, August 10, 2007 2:02 PM Windows XP 1 Open the [Control Panel] > [Network and Internet Settings] > [Network Connections] control panel. Creating an ftp Server / Windows XP 2 Right-click the [Wireless Network Connection] icon and select [Properties] from the menu that appears. 3 Select [Internet Protocol (TCP/IP)] and click [Properties]. 114 Operating the WT-4 for FTP


Document Created: 2007-10-05 11:09:51
Document Modified: 2007-10-05 11:09:51
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC