N6C-SDMAC2

FCC ID

Equipment: SX-SDMAC2

Silex Technology, Inc. -SDMAC2

2-3-1 Hikaridai,Seika-cho Sourakugun, Kyoto, N/A 619-0237 Japan

Application
Frequency Range
Final Action Date
Granted
uRjm+WHjivbFTdgiVIZ6uA==
2402.0-2480.0
2019-07-09
APPROVED
uRjm+WHjivbFTdgiVIZ6uA==
2412.0-2462.0
2019-07-09
APPROVED
pM7k13dSVWx2g9cb3gehZA==
2402.0-2480.0
2019-07-09
APPROVED
JtdXN6/HzSnEz7yTDNC/cQ==
5180.0-5240.0
2019-07-09
APPROVED
JtdXN6/HzSnEz7yTDNC/cQ==
5260.0-5320.0
2019-07-09
APPROVED
JtdXN6/HzSnEz7yTDNC/cQ==
5500.0-5700.0
2019-07-09
APPROVED
JtdXN6/HzSnEz7yTDNC/cQ==
5745.0-5825.0
2019-07-09
APPROVED
File NameDocument TypeDateDirect
Users ManualUsers Manual 2019-07-09 00:00:00 pdf
ID Label/Location InfoID Label/Location Info 2019-07-09 00:00:00 pdf
Test Report_DFSTest Report 2019-07-09 00:00:00 pdf
Test Report_NIITest Report 2019-07-09 00:00:00 pdf
MPE ReportRF Exposure Info 2019-07-09 00:00:00 pdf
Modular Approval RequestCover Letter(s) 2019-07-09 00:00:00 pdf
confidentialityCover Letter(s) 2019-07-09 00:00:00 pdf
Declaration of authorizationCover Letter(s) 2019-07-09 00:00:00 pdf
DTS-NII Device Declaration LetterCover Letter(s) 2019-07-09 00:00:00 pdf
DTS Test Report_BLETest Report 2019-07-09 00:00:00 pdf
DTS test report_2.4GTest Report 2019-07-09 00:00:00 pdf
WIFI CH12-13 Declaration LetterCover Letter(s) 2019-07-09 00:00:00 pdf
Test Report_DSSTest Report 2019-07-09 00:00:00 pdf
SchematicsSchematics N/A
Block DiagramBlock Diagram N/A
External photoExternal Photos 2020-01-05 00:00:00 N/A
Internal PhotosInternal Photos 2020-01-05 00:00:00 N/A
Test Setup Photos_DFSTest Setup Photos 2020-01-05 00:00:00 N/A
Test Setup Photos_NIITest Setup Photos 2020-01-05 00:00:00 N/A
Operational DescriptionOperational Description N/A
Operational Description_Software Security for UNII DevicesOperational Description N/A
Test Setup Photos_DSSTest Setup Photos 2020-01-05 00:00:00 N/A
DTS Test Setup Photos_BLETest Setup Photos 2020-01-05 00:00:00 N/A
DTS Test Setup Photos_2.4GTest Setup Photos 2020-01-05 00:00:00 N/A

Application Details:

EquipmentSX-SDMAC2
FRN0013616305
Grantee CodeN6C
Product Code-SDMAC2
Applicant BusinessSilex Technology, Inc.
Business Address2-3-1 Hikaridai,Seika-cho Sourakugun , Kyoto,N/A Japan 619-0237
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantToshiro Kometani – Manager
Applicant Phone
Applicant Fax81 774-98-3767
Applicant Email[email protected]
Applicant MailStop
Test FirmCompliance Certification Services Inc. Wugu Lab.
Test Firm ContactHank Lee
Test Firm Phone 1529
Test Firm Fax+886-2-2299-9721
Test Firm Email[email protected]
Certified ByToshiro Kometani – Manager
Comment [JtdXN6/HzSnEz7yTDNC/cQ==]: Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40MHz and 80MHz bandwidth modes Operations in 5150-5250 MHz band is for indoor use only.
Comment [pM7k13dSVWx2g9cb3gehZA==]: Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.
Comment [uRjm+WHjivbFTdgiVIZ6uA==]: Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40MHz bandwidth modes

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC