RF Exporure Report

FCC ID: N5MSP-1078

RF Exposure Info

Download: PDF
FCCID_2337102

FCC ID: N5MSP-1078 RF EXPOSURE TEST FCC ID: N5MSP-1078 SAR Test Exclusion Thresholds for 100 MHz – 6 GHz and ≤ 50 mm Approximate SAR Test Exclusion Power Thresholds at Selected Frequencies and Test Separation Distances are illustrated in the following Table. The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR,16 where  f(GHz) is the RF channel transmit frequency in GHz  Power and distance are rounded to the nearest mW and mm before calculation17  The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion.

FCC ID: N5MSP-1078 Maximum measured transmitter power. GFSK Maximum Peak Maximum frequency Exclusion Conducted Conducted range Thresholds Limit Output Power Output Power Results (MHz) (dBm) (mW) 2402 1.98 1.58 0.490 3.0 2441 1.84 1.53 0.478 3.0 2480 1.87 1.54 0.485 3.0 Conclusion: No SAR is required. Note: Exclusion Thresholds Results=[(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] f(GHz) is the RF channel transmit frequency in GHz  Distance=5mm 8-DPSK Maximum Peak Maximum frequency Exclusion Conducted Conducted range Thresholds Limit Output Power Output Power Results (MHz) (dBm) (mW) 2402 1.52 1.42 0.440 3.0 2441 1.41 1.38 0.431 3.0 2480 1.45 1.40 0.441 3.0 Conclusion: No SAR is required. Note: Exclusion Thresholds Results=[(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] f(GHz) is the RF channel transmit frequency in GHz  Distance=5mm


Document Created: 2014-07-15 21:21:47
Document Modified: 2014-07-15 21:21:47
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC