RF Exposure Report (MPE)

FCC ID: N52-SDR-ICS-437FN

RF Exposure Info

Download: PDF
FCCID_4168806

RF Exposure Measurement
1. Introduction
The maximum Gain measured in Fully Anechoic Chamber
Because this deivce is transmitting the high power signal, it is regarded specially as a dangerous band for its
heating harmfulness to the human body. The manufacturer whose product is working in this frequency band is
obligatory to prove the harmfulness of his product.
In this document, we try to prove the safety of radiation harmfulness to the human body for our product. The
limit for Maximum Permissible Exposure (MPE) specified in FCC 1.1310 is followed. The Gain of the antenna
used in this product is measured in a Fully Anechoic Chamber (FAC), and the maximum total power input to the
antenna is measured. Through the Friis transmission formula and the maximum gain of the antenna, we can
calculate the distance, away from the product, where the limit of MPE is reached.

2. RF Exposure Limit
  According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environmental
  impact of human exposure to radio-frequency(RF) radiation as specified in 1.1307(b).
LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) - Class A
   Frequency Range   Electric Field Strength Magnetic Field                  Power Density         Average Time
        (MHz)                 (V/m)          Strength(A/m)                     (mW/cm2)              (minutes)
                                                                                     *
        0.3 - 3.0                         614                   1.63                     (100)          6
                                                                                 *             2
        3.0 - 30                         1842/f                4.89/f                (900/f )           6
        30 - 300                         61.4                  0.163                     1.0            6
       300 - 1500                                                                    F/300              6
     1500 - 100,000                                                                       5             6
LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) - Class B
   Frequency Range   Electric Field Strength Magnetic Field                  Power Density         Average Time
                              (V/m)                                                   2
        (MHz)                                Strength(A/m)                     (mW/cm )              (minutes)
                                                                                     *
       0.3 - 1.34                         614                   1.63                     (100)          30
                                                                                 *             2
        1.34 - 30                        824/f                 2.19/f                (180/f )           30
        30 - 300                         27.5                  0.073                     0.2            30
       300 - 1500                          -                     -               F/1500                 30
     1500 - 100,000                        -                     -                       1.0            30
                            *
F = Frequency in MHz            = Plane-wave equivalent power density

3. Friis Formula

                       R=         PG
                                  4 S

    The maximum Gain measured in Fully Anechoic Chamber
    LTE : 50.118 (nemeric)
    Pout = output power to antenna in mW
    G = gain of antenna in linear scale
    Pi = 3.1416
    MODE: LTE


                                                                                                    Page 1 of 2


4. Test Results

The maximum Gain measured in Fully Anechoic Chamber

                  Band                            dBi                nemeric

       758.00MHz ~ 768.00 MHz
                                                17 dBi          50.118 (nemeric)
       /788.00MHz ~ 798.00 MHz



4.2 Output Power into Antenna & Power Density (0.509mW/cm2) :

MODE: LTE


                           Channel
                                          MAX Output Power       Power Density
        Band              Frequency
                                           to Antenna (mW)        (mW/cm2)
                            (MHz)
    758.00MHz ~
                          763.00 MHz          19769.696              197.13
     768.00 MHz



The Maximum antenna gain is 17dBi and the shortest distance from the human
specific is 387.536 cm, the device is compliant with the requirement MPE limit for
uncontrolled exposure.




                                                                                     Page 2 of 2



Document Created: 2019-01-21 14:49:09
Document Modified: 2019-01-21 14:49:09

© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC