MPE Report

FCC ID: N52-ADX-R-SMR

RF Exposure Info

Download: PDF
FCCID_2566280

FCC ID: N52-ADX-R-SMR/ IC: 6416A-ADXRSMR RF EXPOSURE STATEMENT 1. LIMITS According to §1.1310 and §2.1091 RF exposure is calculated. (B) Limits for General Population/Uncontrolled Exposures Frequency range Electric field Magnetic field Power density Averaging time (MHz) Strength (V/m) Strength (A/m) (mW/cm²) (minutes) 0.3 - 1.34………………………………… 614 1.63 *(100) 30 1.34 - 30………………………………… 824/f 2.19/f *(180/ f²) 30 30 - 300………………………………… 27.5 0.073 0.2 30 300 - 1500……………………………… …………... …………... f/1500 30 1500 - …………... …………... 1.0 30 100.000…………………………… F = frequency in MHz * = Plane-wave equivalent power density 2. MAXIMUM PERMISSIBLE EXPOSURE Prediction Prediction of MPE limit at a given distance S = PG/4πR² S = Power density P = power input to antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna

FCC ID: N52-ADX-R-SMR/ IC: 6416A-ADXRSMR 2-1 Limit Max Average output Power at antenna input terminal 32.000 dBm Max Average output Power at antenna input terminal 1584.893 mW Prediction distance 50.000 cm Prediction frequency 851.000 MHz Antenna Gain(typical) 2.000 dBi Antenna Gain(numeric) 2.0 - Power density at prediction frequency( S) 0.07996 mW/cm2 MPE limit for uncontrolled exposure at prediction frequency 0.567 mW/cm2 3. RESULTS The power density level at 50 cm is 0.07996 mW/cm², which is below the uncontrolled exposure limit of 0.567 mW/cm² Note: “"RF exposure will be addressed at time of installation and the use of higher gain antennas may require larger separation distances."


Document Created: 2015-03-04 13:53:55
Document Modified: 2015-03-04 13:53:55
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC