RF Exposure

FCC ID: MTFWMS-0001

RF Exposure Info

Download: PDF

FCCID_4092146

Model(s): WMS-0001 FCC ID: MTFWMS-0001

General Information:
Applicant: Telular, Corp.
Device Category: Mobile
Environment: General Population/Uncontrolled Exposure

Technical Information:
Antenna Type: PCB Trace
Antenna Gain: 0dBi
Maximum Transmitter Conducted Power: 18.21 dBm, 66.22 mW
Maximum System EIRP: 18.21 dBm, 66.22 mW
Exposure Conditions: Greater than 20 centimeters

MPE Calculation
The Power Density (mW/cm2) is calculated as follows:

PG
S=
4πR 2
Where:
S = power density (in appropriate units, e.g. mW/cm2)
P = power input to the antenna (in appropriate units, e.g., mW)
G = power gain of the antenna in the direction of interest relative to an isotropic radiator
R = distance to the center of radiation of the antenna (appropriate units, e.g., cm)

Table 1: MPE Calculation
Power
Transmit Radio Radio Antenna Antenna Power
Density Distance
Frequency Power Power Gain Gain Density
Limit (cm)
(MHz) (dBm) (mW) (dBi) (mW eq.) (mW/cm^2)
(mW/Cm2)
902 28.99 0.60 66.22 0 1.000 20 0.013

Report: AT72143104-2C0 Page 2

Document Created: 2018-11-29 10:40:43
Document Modified: 2018-11-29 10:40:43

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC