FCC Part 1.1310 Test Report

FCC ID: MTD-0005

RF Exposure Info

Download: PDF
FCCID_3803712

Test Report Prepared for: Time Keeping Systems Inc. Model: DD-005 Description: Battery Powered, wireless positioning and duress alarm for prison guards Serial Number: N/A FCC ID: MTD-0005 To FCC Part 1.1310 Date of Issue: March 27, 2018 On the behalf of the applicant: Time Keeping Systems Inc. 30700 Bainbridge Rd Cleveland, OH 44139 Attention of: Dean Chriss, Engineering Consultant Ph: (216)595-1026 Email: dchriss@guard1.com Prepared By Compliance Testing, LLC 1724 S. Nevada Way Mesa, AZ 85204 (480) 926-3100 phone / (480) 926-3598 fax www.compliancetesting.com Project No: p1830001 Poona Saber Project Test Engineer This report may not be reproduced, except in full, without written permission from Compliance Testing All results contained herein relate only to the sample tested p1830001_FCC_Part 1.1310_Rev 2.0 Page 1 of 4

Test Report Revision History Revision Date Revised By Reason for Revision 1.0 March 9, 2018 Poona Saber Original Document 2.0 March 26, 2018 Kenneth Lee Updated Duty Cycle used in Calculations. p1830001_FCC_Part 1.1310_Rev 2.0 Page 2 of 4

ILAC / A2LA Compliance Testing, LLC, has been accredited in accordance with the recognized International Standard ISO/IEC 17025:2005. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer joint ISO-ILAC-IAF Communiqué dated January 2009) The tests results contained within this test report all fall within our scope of accreditation, unless below Please refer to http://www.compliancetesting.com/labscope.html for current scope of accreditation. Testing Certificate Number: 2152.01 FCC Site Reg. #349717 IC Site Reg. #2044A-2 Non-accredited tests contained in this report: N/A EUT Description Model: DD-005 Description: Battery Powered, wireless positioning and duress alarm for prison guards Firmware: NA Software: NA Serial Number: NA Additional Information: Unit is incorporating Bluetooth Low Energy technology with frequency range of 2402-2480 MHz. For Conducted testing an unassembled device with RF connector was utilized and it was powered up with DC power supply of 6.0 V. The regular radiated emissions test device work with batteries EUT Operation during Tests The production sample of Model DD-005 transmits once every second on 3 channels, with each transmission taking 184µsec, or 0.000184 seconds. Total transmission time, on each channel, per second is 184µsec or 0.000184 seconds. This results in a duty cycle of 0.018%. p1830001_FCC_Part 1.1310_Rev 2.0 Page 3 of 4

Source Based Time Averaged Power Calculation Frequency Output Power Duty Cycle Time Averaged Power Antenna Gain EIRP EIRP (MHz) (dBm) (%) (dBm) (dB) (dBm) (mW) 2402 24.11 0.018 -13.24 3.3 -9.94 0.101 Calculating SAR exclusion per KDB 447498. 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR,25 where • f(GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation26 • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below Per formula above: 0.101 𝑚𝑊 X√2.402 = 0.031306742 5 𝑚𝑚 This unit is exempt from SAR testing. END OF TEST REPORT p1830001_FCC_Part 1.1310_Rev 2.0 Page 4 of 4


Document Created: 2019-09-06 22:52:07
Document Modified: 2019-09-06 22:52:07
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC