UserMan_ASUS_X00QDA

FCC ID: MSQX00QSA

Users Manual

Download: PDF
FCCID_3799255

User Guide




             15060-0JS00200
E14108


Third Edition/ March 2018

ASUS Phone (Mobile Phone)
Model: ASUS_X00QDA (ZE620KL)

Before you start, ensure that you have read all the
safety information and operating instructions in this
User Guide to prevent injury or damage to your
device.

     NOTE: For the complete E-Manual and more
     detailed information, refer to https://www.asus.
     com/support/.


Front features
                                   LED indicator
                                   Receiver
                                   Front camera

                                    Proximity
                                    sensor and
                                    light sensor




                                   Touch screen
                                   display


Side features
       Microphone




          Nano SIM/
          microSD card                Volume key
          slot
                                      Power key




                 Microphone



                                    Speaker
    Audio jack    USB Type-C port


    NOTE: The USB Type-C port supports USB 2.0
    transfer rate.


Rear features
  Rear cameras



                 NFC detection area
                 Fingerprint sensor

                 Camera flash




                 Rear cover


Charging your ASUS Phone
To charge your ASUS Phone:
1.   Connect the USB connector into the power
     adapter’s USB port.
2.   Connect the other end of the USB Type-C cable
     to your ASUS Phone.
3.   Plug the power adapter into a wall socket.

             3                        2



                     1




     IMPORTANT!
     •   When using your ASUS Phone while it is
         plugged to a power outlet, the grounded
         power outlet must be near to the unit and
         easily accessible.
     •    When charging your ASUS Phone through
          your computer, ensure that you plug the USB
          Type-C cable to your computer’s USB port.
     •    Avoid charging your ASUS Phone in an
          environment with ambient temperature of
          above 35 °C (95 °F).


     NOTES:
     •  For safety purposes, use ONLY the bundled
        power adapter and cable to avoid damaging
        your device and prevent the risk of injury.
     •    For safety purposes, use ONLY the bundled
          power adapter and cable to charge your ASUS
          Phone.
     •    The input voltage range between the wall
          outlet and this adapter is AC 100V - 240V. The
          output voltage of the USB Type-C cable is
          +5V 2A, 10W.


Installing a nano SIM / microSD card
To install a nano SIM / microSD card:

1.   Push a pin into the hole on the nano SIM /
     microSD card tray to eject it. Insert the nano
     SIM or microSD card into the appropriate slot.
                       Na




                                            Na
                            no




                                              no
                            -SI




                                                -SI
                               M1




                                                   M1
                     Mi




                                      Na
                      cro




                                       no
                       SD




                                        -SI
                                           M2




2.   Push the tray to close it.




     IMPORTANT! You can only use the nano SIM 2 card
     or the microSD card at a time.


     NOTE: The microSD card slot supports microSD
     and microSDXC card formats.


     CAUTION!
     •  Do not use sharp tools or solvent on your
        device to avoid scratches on it.
     •    Use only a standard nano SIM card on your
          ASUS Phone.


Using NFC
     NOTE: NFC is only available in selected regions/
     countries.

You can use NFC in the following three scenarios:
Reader mode: Your phone reads information from a
contactless card, NFC tag, or other NFC devices.
Place the NFC area of your phone on the contactless
card, NFC tag, or NFC device.




Card Emulation mode: Your phone can be used like
a contactless card.
Place the NFC area of your phone on the NFC area of
the NFC reader.


Peer-to-Peer mode: Transfers photos, contacts, or
other data between your phone and an NFC-enabled
smartphone.
Bring the NFC areas of both smartphones together,
without any space between them.




Federal Communications
Commission Statement
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Changes or modifications not expressly approved by
the party responsible for compliance could void the
user‘s authority to operate the equipment.
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. If this equipment does


cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
-    Reorient or relocate the receiving antenna.
-    Increase the separation between the
     equipment and receiver.
-    Connect the equipment into an outlet on a
     circuit different from that to which the receiver
     is connected.
-    Consult the dealer or an experienced radio/TV
     technician for help.
The antenna(s) used for this transmitter must not be
co-located or operated in conjunction with any other
antenna or transmitter.
The country code selection is for non-US models
only and is not available to all US models. Per FCC
regulation, all WiFi products that are marketed in US
must be fixed to US-operated channels only.
The responsible party within the USA per 47 CFR Part
2.1077(a)(3):
ASUS COMPUTER INTERNATIONAL (America)
Address: Corporate Way, Fremont, CA 94539, USA
Telephone: +1-510-739-3777

RF Exposure Information (SAR)
This device has been tested and meets applicable
limits for Radio Frequency (RF) exposure.
Specific Absorption Rate (SAR) refers to the rate at
which the body absorbs RF energy. SAR limits are
1.6 Watts per kilogram (over a volume containing
a mass of 1 gram of tissue) in countries that follow
the United States FCC limit and 2.0 W/kg (averaged
over 10 grams of tissue) in countries that follow the
Council of the European Union limit. Tests for SAR are
conducted using standard operating positions with


the device transmitting at its highest certified power
level in all tested frequency bands.
To reduce exposure to RF energy, use a hands-free
accessory or other similar option to keep this device
away from your head and body. Carry this device
at least 15 mm away from your body to ensure
exposure levels remain at or below the as-tested
levels. Choose the belt clips, holsters, or other
similar body-worn accessories which do not contain
metallic components to support operation in this
manner. Cases with metal parts may change the RF
performance of the device, including its compliance
with RF exposure guidelines, in a manner that has
not been tested or certified, and use such accessories
should be avoided.
The highest FCC SAR values for the device (ASUS_
X00QDA) are as follows:
•    1.04 W/Kg @1g (Head)
•    0.37 W/Kg @1g (Body)
•    1.17 W/Kg @1g (Hotspot)
•    0.96 W/Kg @10g (Specific product)

The FCC has granted an Equipment Authorization
for this device (ASUS_X00QDA) with all reported SAR
levels evaluated as in compliance with the FCC RF
exposure guidelines. SAR information on this device
is on file with the FCC and can be found under the
Display Grant section of www.fcc.gov/oet/ea/fccid
after searching on FCC ID: MSQX00QSA.


EU Radio Equipment Directive
Compliance
Simplified EU Declaration of Conformity
Hereby, ASUSTek Computer Inc. declares that the
radio equipment ASUS_X00QDA is in compliance
with Directive 2014/53/EU. Full text of EU declaration
of conformity is available at https://www.asus.com/
support/. (Search for ZE620KL)

RF Output Table

Items       Maximum Radio-Frequency Output Power Table
            Bluetooth BR/EDR (2402~2480 MHz)      9.47 dBm
Bluetooth
            Bluetooth LE (2402~2480 MHz)          -0.2 dBm
            2.4GHz 802.11b (2412~2472 MHz)        18.90 dBm
            2.4GHz 802.11g (2412~2472 MHz)        17.90 dBm
            2.4GHz 802.11n HT20 (2412~2472 MHz)   16.90 dBm
            5GHz 802.11a (5180~5320, 5500~5700    17.97 dBm
            MHz)
            5GHz 802.11n HT20 (5180~5320,         17.83 dBm
            5500~5700 MHz)
WLAN        5GHz 802.11n HT40 (5190~5310,         17.94 dBm
            5510~5670 MHz)
            5GHz 802.11ac-VHT20 (5180~5320,       16.98 dBm
            5500~5700 MHz)
            5GHz 802.11ac-VHT40 (5190~5310,       16.91 dBm
            5510~5670 MHz)
            5GHz 802.11ac VHT80 (5210~5290,       16.92 dBm
            5530~5610 MHz)
            13.553~13.567 MHz                     -14.78
NFC
                                                  dBuA/M
            GSM 900 Burst (880~915; 925~960 MHz) 32.95 dBm
GSM         GSM 1800 Burst (1710~1785;            30.21 dBm
            1805~1880 MHz)


RF Output Table (ASUS_X00QD)
Items        Maximum Radio-Frequency Output Power Table
             WCDMA Band I (1920~1980; 2110~2170 23.46 dBm
             MHz)
             WCDMA Band III (1710~1785;              22.98 dBm
WCDMA
             1805~1880 MHz)
             WCDMA Band VIII (880~915; 925~960       23.48 dBm
             MHz)
             LTE Band I (1920~1980; 2110~2170        23.51 dBm
             MHz)
             LTE Band III (1710~1785; 1805~1880      23.62 dBm
             MHz)
             LTE Band VII (2500~2570; 2620~2690      23.05 dBm
             MHz)

LTE          LTE Band VIII (880~915; 925~960 MHz)    23.18 dBm
             LTE Band XX (832~862; 791~821 MHz)      22.75 dBm
             LTE Band XXVIII (703~748; 758~803       22.87 dBm
             MHz)
             LTE Band XXXIV (2010~2025 MHz)          23.27 dBm
             LTE Band XXXVIII (2570~2620 MHz)        23.38 dBm
             LTE Band XL (2300~2400 MHz)             23.39 dBm


        NOTE: This RF output power table is for EU
        member states, the EEA States, the EFTA States
        and Turkey only. The frequency range and the
        RF output power may differ from other non-EU
        countries.

The Wi-Fi operating in the band 5150-5350MHz shall
be restricted to indoor use for countries listed in the
table below:
  AT        BE     BG     CZ      DK       EE       FR
  DE        IS     IE     IT      EL       ES       CY
  LV        LI     LT     LU      HU       MT       NL
  NO        PL     PT     RO      SI       SK       TR
  FI        SE     CH     UK      HR


RF Exposure Information
This ASUS product has been tested and meets
applicable European SAR limits. The SAR limit is 2.0
W/kg in countries that set the limit averaged over 10
grams of tissue. The specific maximum SAR values for
this device are as follows:
•    Head: 1.047 W/Kg
•     Body: 1.453 W/Kg
When carrying this device or using it while worn on
the body, either use an approved accessory such
as a holster or otherwise maintain a distance of 0.5
cm from the body to ensure compliance with RF
exposure requirements.

CE Marking




Prevention of Hearing Loss
To prevent possible hearing damage, do not listen at
high volume levels for long periods




For France, headphones/earphones for this device
are compliant with the sound pressure level
requirement laid down in the applicable EN 50332-
1:2013 and/or EN50332-2:2013 standard required by
French Article L.5232-1.


Using GPS (Global Positioning
System) on your ASUS Phone
To use the GPS positioning feature on your ASUS
Phone:
•     Ensure that your device is connected to the
      Internet before using Google Map or any
      GPS-enabled apps.
•     For first-time use of a GPS-enabled app on
      your device, ensure that you are outdoors to
      get the best positioning data.
•     When using a GPS-enabled app on your
      device inside a vehicle, the metallic
      component of the car window and other
      electronic devices might affect the GPS
      performance.

Safety information

     CAUTION! Use of controls or adjustments or
     performance of procedures other than those
     specified herein may result in hazardous radiation
     exposure.


ASUS Phone care
•   Use your ASUS Phone in an environment with
    ambient temperatures between 0 °C (32 °F) and
    35 °C (95 °F).
The battery

     WARNING: Disassembling the battery by yourself
     will void its warranty and may cause serious harm.

Your ASUS Phone is equipped with a high
performance non-detachable Li-polymer battery.
Observe the maintenance guidelines for a longer
battery life.


•   Do not remove the non-detachable Li-polymer
    battery as this will void the warranty.
•   Avoid charging in extremely high or low
    temperature. The battery performs optimally in
    an ambient temperature of +5 °C to +35 °C.
•   Do not remove and replace the battery with a
    non-approved battery.
•   Use only ASUS battery. Using a different battery
    may cause physical harm/injury and may
    damage your device.
•   Do not remove and soak the battery in water or
    any other liquid.
•   Never try to open the battery as it contains
    substances that might be harmful if swallowed
    or allowed to come into contact with
    unprotected skin.
•   Do not remove and short-circuit the battery, as
    it may overheat and cause a fire. Keep it away
    from jewelry or metal objects.
•   Do not remove and dispose of the battery
    in fire. It could explode and release harmful
    substances into the environment.
•   Do not remove and dispose of the battery
    with your regular household waste. Take it to a
    hazardous material collection point.
•   Do not touch the battery terminals.
•   To avoid fire or burns, do not disassemble,
    bend, crush, or puncture the battery.


    NOTES:
    •  Risk of explosion if battery is replaced by an
       incorrect type.
    •    Dispose of used battery according to the
         instructions.

The charger
•   Use only the charger supplied with your ASUS
    Phone.


•    Never pull the charger cord to disconnect it
     from the power socket. Pull the charger itself.
Caution
Your ASUS Phone is a high quality piece of
equipment. Before operating, read all instructions
and cautionary markings on the (1) AC Adapter.
•    Do not use the ASUS Phone in an extreme
     environment where high temperature or high
     humidity exists. The ASUS Phone performs
     optimally in an ambient temperature between
     0 °C (32 °F) and 35 °C (95 °F).
•    Do not disassemble the ASUS Phone or its
     accessories. If service or repair is required,
     return the unit to an authorized service center.
     If the unit is disassembled, a risk of electric
     shock or fire may result.
•    Do not short-circuit the battery terminals with
     metal items.

Operator access with a tool
If a TOOL is necessary to gain access to an OPERATOR
ACCESS AREA, either all other compartments within
that area containing a hazard shall be inaccessible
to the OPERATOR by the use of the same TOOL, or
such compartments shall be marked to discourage
OPERATOR access.

General Usage (typical body-worn)
(for Japan)
This device (front & rear side) should be operated
under a seperation distance of 5 mm from the
human body.
* The other four sides are not in close proximity to
the human body at the general use as described
above.


Regional notice for Singapore
This ASUS Phone
complies with IMDA
Standards.



India E-waste (Management) Rules
2016
This product complies with the “India E-Waste
(Management) Rules, 2016” and prohibits use of lead,
mercury, hexavalent chromium, polybrominated
biphenyls (PBBs) and polybrominated diphenyl
ethers (PBDEs) in concentrations exceeding 0.1%
by weight in homogenous materials and 0.01 %
by weight in homogenous materials for cadmium,
except for the exemptions listed in Schedule II of
the Rule.

India BIS - IS 16333 Notice
Language Input : Hindi, English, Tamil
Readability: Assamese, Bangla, Bodo(Boro), Dogri,
Gujarati, Hindi, Kannada, Kashmiri, Konkani, Maithili,
Malayalam, Manipuri(Bangla), Manipuri(Meetei
Mayek), Marathi, Nepali, Oriya, Panjabi, Santhali,
Sanskrit, Sindhi (Devanagari) ,Tamil, Telugu, Urdu
and English

ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come
from our commitment to the highest standards for
protecting our environment. We believe in providing
solutions for you to be able to responsibly recycle
our products, batteries, other components as well as
the packaging materials. Please go to http://csr.asus.
com/english/Takeback.htm for detailed recycling
information in different regions.


Proper disposal
           Risk of explosion if battery is
           replaced by an incorrect type.
           Dispose of used batteries
           according to the instructions.

           DO NOT throw the battery in
           municipal waste. The symbol of the
           crossed out wheeled bin indicates
           that the battery should not be placed
           in municipal waste.
           DO NOT throw this product in
           municipal waste. This product has
           been designed to enable proper
           reuse of parts and recycling. The
           symbol of the crossed out wheeled
           bin indicates that the product
           (electrical, electronic equipment
           and mercury-containing button
           cell battery) should not be placed
           in municipal waste. Check local
           regulations for disposal of electronic
           products.

           DO NOT throw this product in fire.
           DO NOT short circuit the contacts. DO
           NOT disassemble this product.



                    WARNING
        Cancer and Reproductive Harm-
          www.P65Warnings.ca.gov

   NOTE: For more legal and e-labelling information,
   check on your device from Settings > About >
   Legal information / Regulatory labels.


                               ASUS
    Address: 4F, 150 Li—Te Rd., Peitou, Taipei,
                     Taiwan
                       Tel: 886228943447
                       Fax: 886228907698
                          Declaration
We declare that the IMEl codes for this product, ASUS
Phone, are unique to each unit and only assigned to
this model. The IMEI of each unit is factory set and
cannot be altered by the user and that it complies
with the relevant IMEl integrity related requirements
expressed in the GSM standards.

Should you have any questions or comments regarding
this matter, please contact us.

Sincerely yours,
ASUSTeK COMPUTER INC.
Tel: 886228943447
Fax: 886228907698
Support: https://www.asus.com/support/

Copyright © 2018 ASUSTeK COMPUTER INC.
All Rights Reserved.
You acknowledge that all rights of this Manual remain with ASUS.
Any and all rights, including withoutlimitation, in the Manual or
website, and shall remain the exclusive property of ASUS and/or its
licensors. Nothing in this Manual intends to transfer any such rights,
or to vest any such rights to you.
ASUS PROVIDES THIS MANUAL "AS IS" WITHOUT WARRANTY OF
ANY KIND. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS
MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE
SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD
NOT BE CONSTRUED AS A COMMITMENT BY ASUS.

ZenTalk Fans Forum
(http://www.asus.com/zentalk/global forward.php)



Document Created: 2019-03-29 21:59:48
Document Modified: 2019-03-29 21:59:48

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC