Part 90 Test Report

FCC ID: MSQI01WDX

Test Report

Download: PDF
FCCID_4334611

FCC Test Report (Part 90 Subpart S) (Spot Check) Report No.: RF190507C02-8 FCC ID: MSQI01WDX Original FCC ID: MSQI01WD Test Model: ASUS_I01WDX Received Date: May 07, 2019 Test Date: May 11 ~ May 20, 2019 Issued Date: May 29, 2019 Applicant: ASUSTek COMPUTER INC. Address: 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan (R.O.C.) Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN (R.O.C.) FCC Registration / 788550 / TW0003 Designation Number: This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies Report No.: RF190507C02-8 Page No. 1 / 22 Report Format Version: 6.1.1

Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity...................................................................................................................... 4 2 Summary of Test Results ..................................................................................................................... 5 2.1 Measurement Uncertainty ................................................................................................................... 5 2.2 Test Site and Instruments.................................................................................................................... 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT ................................................................................................................ 7 3.2 Configuration of System under Test .................................................................................................... 8 3.2.1 Description of Support Units ................................................................................................................ 8 3.3 Test Mode Applicability and Tested Channel Detail ............................................................................ 9 3.4 EUT Operating Conditions .................................................................................................................. 9 3.5 General Description of Applied Standards .......................................................................................... 9 4 Test Types and Results ...................................................................................................................... 10 4.1 Output Power Measurement ............................................................................................................. 10 4.1.1 Limits of Output Power Measurement ............................................................................................... 10 4.1.2 Test Procedures................................................................................................................................. 10 4.1.3 Test Setup ........................................................................................................................................... 11 4.1.4 Test Results ....................................................................................................................................... 12 4.2 Radiated Emission Measurement ..................................................................................................... 16 4.2.1 Limits of Radiated Emission Measurement ....................................................................................... 16 4.2.2 Test Procedure .................................................................................................................................. 16 4.2.3 Deviation from Test Standard ............................................................................................................ 16 4.2.4 Test Setup .......................................................................................................................................... 17 4.2.5 Test Results ....................................................................................................................................... 18 5 Pictures of Test Arrangements .......................................................................................................... 21 Appendix – Information of the Testing Laboratories ................................................................................. 22 Report No.: RF190507C02-8 Page No. 2 / 22 Report Format Version: 6.1.1

Release Control Record Issue No. Description Date Issued RF190507C02-8 Original release May 29, 2019 Report No.: RF190507C02-8 Page No. 3 / 22 Report Format Version: 6.1.1

1 Certificate of Conformity Product: ASUS Phone Brand: ASUS Test Model: ASUS_I01WDX Sample Status: Identical Prototype Applicant: ASUSTek COMPUTER INC. Test Date: May 11 ~ May 20, 2019 Standards: FCC Part 90, Subpart I, S The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date: May 29, 2019 Pettie Chen / Senior Specialist Approved by : , Date: May 29, 2019 Bruce Chen / Project Engineer Report No.: RF190507C02-8 Page No. 4 / 22 Report Format Version: 6.1.1

2 Summary of Test Results Applied Standard: FCC Part 90 & Part 2 FCC Test Item Result Remarks Clause Meet the requirement of limit. 2.1053 Radiated Spurious Emissions Pass Minimum passing margin is -37.7dB at 90.691 273.47MHz. Note: Determining compliance based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. 2.1 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: Expanded Uncertainty Measurement Frequency (k=2) (±) 9kHz ~ 30MHz 3.04 dB Radiated Emissions up to 1 GHz 30MHz ~ 200MHz 3.63 dB 200MHz ~1000MHz 3.64 dB 1GHz ~ 18GHz 2.29 dB Radiated Emissions above 1 GHz 18GHz ~ 40GHz 2.29 dB Report No.: RF190507C02-8 Page No. 5 / 22 Report Format Version: 6.1.1

2.2 Test Site and Instruments Description & Manufacturer Model No. Serial No. Cal. Date Cal. Due Test Receiver ESCI 100424 Jan. 03, 2019 Jan. 02, 2020 ROHDE & SCHWARZ Spectrum Analyzer FSP40 100040 Sep. 25, 2018 Sep. 24, 2019 ROHDE & SCHWARZ MXG Vector signal generator N5182B MY53050162 Jan. 16, 2019 Jan. 15, 2020 Agilent BILOG Antenna VULB9168 9168-156 Nov. 20, 2018 Nov. 19, 2019 SCHWARZBECK BILOG Antenna VULB9168 9168-155 Nov. 21, 2018 Nov. 20, 2019 SCHWARZBECK HORN Antenna BBHA 9120D 9120D-1170 Nov. 25, 2018 Nov. 24, 2019 SCHWARZBECK HORN Antenna BBHA 9170 BBHA9170241 Nov. 25, 2018 Nov. 24, 2019 SCHWARZBECK Loop Antenna HLA 6121 45745 Jun. 14, 2018 Jun. 13, 2019 TESEQ Preamplifier Agilent 8447D 2944A10631 Aug. 08, 2018 Aug. 07, 2019 (Below 1GHz) Preamplifier KEYSIGHT 83017A MY53270295 Jul. 02, 2018 Jul. 01, 2019 (Above 1GHz) RF signal cable SUCOFLEX 104 MY 13380+295012/04 Aug. 08, 2018 Aug. 07, 2019 HUBER+SUHNER RF signal cable SUCOFLEX 104 Cable-CH4-03 (250724) Aug. 08, 2018 Aug. 07, 2019 HUBER+SUHNER Software ADT_Radiated_ NA NA NA BV ADT V7.6.15.9.5 Antenna Tower MA 4000 010303 NA NA inn-co GmbH Antenna Tower Controller AT100 AT93021703 NA NA BV ADT Turn Table TT100 TT93021703 NA NA BV ADT Turn Table Controller SC100 SC93021703 NA NA BV ADT Boresight Antenna Fixture FBA-01 FBA-SIP01 NA NA WIT Standard Temperature TH-4S-C W981030 Jun. 04, 2018 Jun. 03, 2019 And Humidity Chamber JFW 20dB attenuation 50HF-020-SMA NA NA NA True RMS Clamp Meter 325 31130711WS May 22, 2018 May 21, 2019 Fluke Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in HwaYa Chamber 4. Report No.: RF190507C02-8 Page No. 6 / 22 Report Format Version: 6.1.1

3 General Information 3.1 General Description of EUT Product ASUS Phone Brand ASUS Test Model ASUS_I01WDX Sample Status Identical Prototype 3.85 Vdc (Battery) Power Supply Rating 5 or 9 Vdc (Adapter) 5 Vdc (Host equipment) Modulation Type QPSK, 16QAM, 64QAM LTE Band 26 (Channel Bandwidth 1.4MHz) 814.7~823.3MHz LTE Band 26 (Channel Bandwidth 3MHz) 815.5~822.5MHz Operating Frequency LTE Band 26 (Channel Bandwidth 5MHz) 816.5~821.5MHz LTE Band 26 (Channel Bandwidth 10MHz) 819.0MHz QPSK 16QAM 64QAM 11.220mW 9.120mW 8.128mW LTE Band 26 (Channel Bandwidth 1.4MHz) (10.50dBm) (9.60dBm) (9.10dBm) 12.023mW 10.233mW 8.511mW Max. ERP Power LTE Band 26 (Channel Bandwidth 3MHz) (10.80dBm) (10.10dBm) (9.30dBm) 11.482mW 10.233mW 8.710mW LTE Band 26 (Channel Bandwidth 5MHz) (10.60dBm) (10.10dBm) (9.40dBm) 10.965mW 9.550mW 7.943mW LTE Band 26 (Channel Bandwidth 10MHz) (10.40dBm) (9.80dBm) (9.00dBm) QPSK 16QAM 64QAM LTE Band 26 (Channel Bandwidth 1.4MHz) 1M09G7D 1M09D7W 1M09D7W Emission Designator LTE Band 26 (Channel Bandwidth 3MHz) 2M70G7D 2M70D7W 2M70D7W LTE Band 26 (Channel Bandwidth 5MHz) 4M49G7D 4M49D7W 4M49D7W LTE Band 26 (Channel Bandwidth 10MHz) 8M96G7D 8M97D7W 8M97D7W Antenna Type Refer to Note as below Antenna Connector Refer to Note as below Accessory Device Refer to Note as below Cable Supplied Refer to Note as below Note: 1. This report is a supplementary report to the original BV CPS report no.: RF190114C07-9. Exhibit prepared for FCC Spot Check Verification report, the format, test items and amount of spot-check test data are decided by applicant's engineering judgment, for more details please refer to declaration letter exhibit. Radiated emission verification test based on the worst channel refer to original report. 2. The EUT accessories list refers to EUT Photo.pdf. 3. The following antennas were provided to the EUT. Gain (dBi) Ant. No. Type Connector GSM GSM WCDMA WCDMA WCDMA LTE LTE LTE LTE B2 LTE B4 LTE B5 LTE B7 850 1900 B2 B4 B5 B26 B38 B41 WWAN PIFA NA -4.5 -2.6 -2.6 -1.9 -4.5 -2.5 -1.9 -4.5 -1.3 -4.4 -1.0 -1.0 Antenna-0 WWAN PIFA NA -3.4 -3.2 -3.2 -5.3 -3.4 -3.2 -5.3 -3.3 -4.7 -3.3 -5.7 -5.7 Antenna-1 Report No.: RF190507C02-8 Page No. 7 / 22 Report Format Version: 6.1.1

3.2 Configuration of System under Test Earphone (EUT) EUT Adapter (EUT) Remote site Radio Communication Analyzer (A) 3.2.1 Description of Support Units The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. ID Product Brand Model No. Serial No. FCC ID Remarks Radio A. Communication Anritsu MT8860C 1702001 NA - Analyzer Note: 1. All power cords of the above support units are non-shielded (1.8m). 2. Item A acted as a communication partner to transfer data. Report No.: RF190507C02-8 Page No. 8 / 22 Report Format Version: 6.1.1

3.3 Test Mode Applicability and Tested Channel Detail Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates, XYZ axis and antenna ports. The worst case was found when positioned on Z-plane. Following channel(s) was (were) selected for the final test as listed below. LTE Band 26 EUT Channel Configure Test item Available channel Tested channel Modulation Mode Bandwidth Mode 26697 (814.7MHz), QPSK / 16QAM / 26697 to 26783 26740 (819.0MHz), 1.4MHz 1 RB / 0 RB Offset 26783 (823.3MHz) 64QAM 26705 (815.5MHz), QPSK / 16QAM / 26705 to 26775 26740 (819.0MHz), 3MHz 1 RB / 0 RB Offset Conducted 26775 (822.5MHz) 64QAM - Output Power 26715 (816.5MHz), QPSK / 16QAM / 26715 to 26765 26740 (819.0MHz), 5MHz 1 RB / 0 RB Offset 26765 (821.5MHz) 64QAM QPSK / 16QAM / 26740 26740 (819.0MHz) 10MHz 1 RB / 0 RB Offset 64QAM Radiated - Emission 26697 to 26783 26697 (814.7MHz) 1.4MHz QPSK 1 RB / 0 RB Offset Below 1GHz Radiated - Emission 26740 26740 (819.0MHz) 10MHz QPSK 1 RB / 0 RB Offset Above 1GHz Test Condition: Test Item Environmental Conditions Input Power Tested By Conducted Output Power 25deg. C, 70%RH 120Vac, 60Hz Han Wu Radiated Emission 24deg. C, 64%RH 120Vac, 60Hz Match Tsui Below 1GHz Radiated Emission 24deg. C, 66%RH 120Vac, 60Hz Greg Lin Above 1GHz 3.4 EUT Operating Conditions The EUT makes a call to the communication simulator. The communication simulator station system controlled a EUT to export maximum output power under transmission mode and specific channel frequency 3.5 General Description of Applied Standards The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC 47 CFR Part 2 FCC 47 CFR Part 90 KDB 971168 D01 Power Meas License Digital Systems v03r01 KDB 971168 D02 Misc Rev Approv License Devices v02r01 ANSI/TIA/EIA-603-E 2016 ANSI 63.26-2015 All test items have been performed and recorded as per the above standards. Report No.: RF190507C02-8 Page No. 9 / 22 Report Format Version: 6.1.1

4 Test Types and Results 4.1 Output Power Measurement 4.1.1 Limits of Output Power Measurement The radiated peak output power shall be according to the specific rule Part 90.635 that “Mobile station are limited to 100 watts e.r.p”. 4.1.2 Test Procedures EIRP / ERP Measurement: a. All measurements were done at low, middle and high operational frequency range. RBW and VBW is 10MHz for LTE mode. b. Substitution method is used for E.I.R.P measurement. In the semi-anechoic chamber, EUT placed on the 0.8m(below or equal 1GHz) and/or 1.5m(above 1GHz) height of Turn Table, rotated the table around 360 degrees to search the maximum radiation power and receiver antenna shall be rotated vertical and horizontal polarization and moved height from 1m to 4m to find the maximum polar radiated power. The “Read Value” is the spectrum reading the maximum power value. c. The substitution horn antenna is substituted for EUT at the same position and signals generator export the CW signal to the substitution antenna via a TX cable. Rotated the Turn Table and moved receiving antenna to find the maximum radiation power. Adjust output power level of S.G to get a Value of spectrum reading equal to “Read Value“ of step b. Record the power level of S.G d. EIRP = Output power level of S.G – TX cable loss + Antenna gain of substitution horn.E.R.P power can be calculated form E.I.R.P power by subtracting the gain of dipole, E.R.P power = E.I.R.P power - 2.15dBi. Where: ERP/EIRP = PMeas + GT - LC PMeas : Measure transmitter output power. GT : Gain of the transmitting antenna. LC : signal attenuation in the connecting cable between the transmitter and antenna. Conducted Power Measurement: The EUT was set up for the maximum power with LTE link data modulation and link up with simulator. Set the EUT to transmit under low, middle and high channel and record the power level shown on simulator. Report No.: RF190507C02-8 Page No. 10 / 22 Report Format Version: 6.1.1

4.1.3 Test Setup EIRP / ERP Measurement: For radiated emission 30MHz to 1GHz Ant. Tower 1-4m Variable EUT& 3m 10m Support Units Turn Table 80cm Ground Plane Test Receiver For radiated emission above 1GHz Ant. Tower 1-4m Variable EUT& 3m Support Units Turn Table Absorber 150cm Ground Plane Test Receiver For the actual test configuration, please refer to the attached file (Test Setup Photo). Conducted Power Measurement: COMMUNICATION EUT SIMULATOR For the actual test configuration, please refer to the attached file (Test Setup Photo). Report No.: RF190507C02-8 Page No. 11 / 22 Report Format Version: 6.1.1

4.1.4 Test Results Conducted Output Power (dBm) LTE Band 26 RB Size RB Offset Low Mid High 3GPP Max. MCS BW Channel 26697 26740 26783 MPR Tune-up Index Frequency (MHz) 814.7 819 823.3 (dB) (dBm) 1 0 21.66 21.69 21.77 0 22.5 1 2 21.60 21.66 21.65 0 22.5 1 5 21.59 21.64 21.69 0 22.5 QPSK 3 0 21.55 21.75 21.93 0 22.5 3 1 21.54 21.69 21.80 0 22.5 3 3 21.50 21.68 21.75 0 22.5 6 0 20.77 20.78 20.81 1 21.5 1 0 20.81 20.78 20.96 1 21.5 1 2 20.78 20.74 20.83 1 21.5 1 5 20.86 20.80 20.82 1 21.5 1.4M 16QAM 3 0 20.75 21.02 21.07 1 21.5 3 1 20.77 20.83 21.03 1 21.5 3 3 20.89 20.81 20.93 1 21.5 6 0 19.95 20.06 20.13 2 20.5 1 0 19.91 19.96 20.15 2 20.5 1 2 19.81 19.93 19.98 2 20.5 1 5 19.84 19.85 20.07 2 20.5 64QAM 3 0 19.84 20.01 20.13 2 20.5 3 1 19.77 20.06 20.14 2 20.5 3 3 19.89 19.94 20.14 2 20.5 6 0 18.84 18.91 18.85 3 19.5 Report No.: RF190507C02-8 Page No. 12 / 22 Report Format Version: 6.1.1

LTE Band 26 RB Size RB Offset Low Mid High 3GPP Max. MCS BW Channel 26705 26740 26775 MPR Tune-up Index Frequency (MHz) 815.5 819 822.5 (dB) (dBm) 1 0 21.66 21.71 21.76 0 22.5 1 7 21.63 21.69 21.73 0 22.5 1 14 21.60 21.66 21.70 0 22.5 QPSK 8 0 20.80 20.93 20.88 1 21.5 8 3 20.83 20.90 20.86 1 21.5 8 7 20.75 20.80 20.83 1 21.5 15 0 20.71 20.78 20.82 1 21.5 1 0 20.83 20.89 20.97 1 21.5 1 7 20.82 20.77 20.98 1 21.5 1 14 20.69 20.70 20.91 1 21.5 3M 16QAM 8 0 19.90 19.87 20.03 2 20.5 8 3 20.01 19.75 20.09 2 20.5 8 7 19.94 20.05 20.10 2 20.5 15 0 20.02 20.01 20.05 2 20.5 1 0 19.89 19.89 20.02 2 20.5 1 7 19.81 19.88 20.02 2 20.5 1 14 19.88 19.70 19.83 2 20.5 64QAM 8 0 18.98 18.82 19.16 3 19.5 8 3 18.82 18.97 18.98 3 19.5 8 7 18.78 18.82 18.86 3 19.5 15 0 18.91 18.92 18.89 3 19.5 Report No.: RF190507C02-8 Page No. 13 / 22 Report Format Version: 6.1.1

LTE Band 26 RB Size RB Offset Low Mid High 3GPP Max. MCS BW Channel 26715 26740 26765 MPR Tune-up Index Frequency (MHz) 816.5 819 821.5 (dB) (dBm) 1 0 21.70 21.75 21.81 0 22.5 1 12 21.66 21.71 21.78 0 22.5 1 24 21.67 21.70 21.77 0 22.5 QPSK 12 0 20.81 20.88 21.00 1 21.5 12 6 20.78 20.84 20.90 1 21.5 12 13 20.75 20.80 20.88 1 21.5 25 0 20.76 20.85 20.87 1 21.5 1 0 20.99 20.97 21.07 1 21.5 1 12 20.95 20.91 21.03 1 21.5 1 24 20.97 21.00 21.04 1 21.5 5M 16QAM 12 0 20.07 20.04 20.15 2 20.5 12 6 20.05 20.07 20.12 2 20.5 12 13 20.09 20.05 20.15 2 20.5 25 0 20.07 20.06 20.18 2 20.5 1 0 19.99 19.95 20.00 2 20.5 1 12 19.90 19.94 20.07 2 20.5 1 24 19.89 19.92 20.03 2 20.5 64QAM 12 0 19.14 19.11 19.25 3 19.5 12 6 19.15 19.14 19.20 3 19.5 12 13 19.08 19.04 19.16 3 19.5 25 0 19.07 19.19 19.20 3 19.5 Report No.: RF190507C02-8 Page No. 14 / 22 Report Format Version: 6.1.1

LTE Band 26 RB Size RB Offset Mid 3GPP Max. MCS BW Channel 26740 MPR Tune-up Index Frequency (MHz) 819 (dB) (dBm) 1 0 21.73 0 22.5 1 24 21.70 0 22.5 1 49 21.69 0 22.5 QPSK 25 0 20.84 1 21.5 25 12 20.80 1 21.5 25 25 20.77 1 21.5 50 0 20.78 1 21.5 1 0 20.95 1 21.5 1 24 20.97 1 21.5 1 49 20.90 1 21.5 10M 16QAM 25 0 20.10 2 20.5 25 12 20.05 2 20.5 25 25 20.04 2 20.5 50 0 20.08 2 20.5 1 0 19.93 2 20.5 1 24 19.91 2 20.5 1 49 19.86 2 20.5 64QAM 25 0 18.96 3 19.5 25 12 18.95 3 19.5 25 25 18.91 3 19.5 50 0 18.90 3 19.5 Report No.: RF190507C02-8 Page No. 15 / 22 Report Format Version: 6.1.1

4.2 Radiated Emission Measurement 4.2.1 Limits of Radiated Emission Measurement The power of any emission outside a licensee's frequency block shall be attenuated below the transmitter power (P) by at least 43 +10 log(P) dB. The limit of emission equal to –13dBm. 4.2.2 Test Procedure a. Substitution method is used for E.I.R.P measurement. In the semi-anechoic chamber, EUT placed on the 0.8m height of Turn Table, rotated the table around 360 degrees to search the maximum radiation power and receiver antenna shall be rotated vertical and horizontal polarization and moved height from 1m to 4m to find the maximum polar radiated power. The “Read Value” is the spectrum reading the maximum power value. b. The substitution horn antenna is substituted for EUT at the same position and signals generator export the CW signal to the substitution antenna via a TX cable. Rotated the Turn Table and moved receiving antenna to find the maximum radiation power. Adjust output power level of S.G to get a Value of spectrum reading equal to “Read Value” of step a. Record the power level of S.G c. EIRP = Output power level of S.G – TX cable loss + Antenna gain of substitution horn. d. E.R.P power can be calculated form E.I.R.P power by subtracting the gain of dipole, E.R.P power = E.I.R.P power - 2.15dBi. NOTE: The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 1MHz/3MHz. 4.2.3 Deviation from Test Standard No deviation. Report No.: RF190507C02-8 Page No. 16 / 22 Report Format Version: 6.1.1

4.2.4 Test Setup For radiated emission 30MHz to 1GHz Ant. Tower 1-4m Variable EUT& 3m 10m Support Units Turn Table 80cm Ground Plane Test Receiver For radiated emission above 1GHz Ant. Tower 1-4m Variable EUT& 3m Support Units Turn Table Absorber 150cm Ground Plane Test Receiver For the actual test configuration, please refer to the attached file (Test Setup Photo). Report No.: RF190507C02-8 Page No. 17 / 22 Report Format Version: 6.1.1

4.2.5 Test Results Below 1GHz LTE Band 26, Channel Bandwidth 1.4MHz TX channel 26697 Mode Frequency Range Below 1000 MHz (814.7MHz) Environmental Conditions 24deg. C, 64%RH Input Power 120Vac, 60Hz Tested By Match Tsui Antenna Polarity & Test Distance: Horizontal at 3 M Reading S.G Power Correction No. Freq. (MHz) ERP (dBm) Limit (dBm) Margin (dB) (dBm) Value (dBm) Factor (dB) 1 30.97 -55.3 -50.8 -0.8 -51.6 -13.0 -38.6 2 827.34 -62.7 -52.5 -3.4 -55.9 -13.0 -42.9 3 870.99 -63.2 -52.3 -3.6 -55.9 -13.0 -42.9 4 911.73 -62.3 -51.0 -3.7 -54.7 -13.0 -41.7 5 960.23 -62.4 -50.1 -3.8 -53.9 -13.0 -40.9 6 1000.00 -63.4 -50.5 -4.0 -54.5 -13.0 -41.5 Remarks: 1. ERP (dBm) = S.G Value (dBm) + Correction Factor (dB). 2. Correction Factor (dB) = Substitution Antenna Gain (dB) + Cable Loss (dB). Report No.: RF190507C02-8 Page No. 18 / 22 Report Format Version: 6.1.1

TX channel 26697 Mode Frequency Range Below 1000 MHz (814.7MHz) Environmental Conditions 24deg. C, 64%RH Input Power 120Vac, 60Hz Tested By Match Tsui Antenna Polarity & Test Distance: Vertical at 3 M Reading S.G Power Correction No. Freq. (MHz) ERP (dBm) Limit (dBm) Margin (dB) (dBm) Value (dBm) Factor (dB) 1 42.61 -42.3 -50.0 -1.0 -51.0 -13.0 -38.0 2 273.47 -53.3 -48.6 -2.1 -50.7 -13.0 -37.7 3 755.56 -62.0 -51.4 -3.5 -54.9 -13.0 -41.9 4 899.12 -63.0 -51.0 -3.7 -54.7 -13.0 -41.7 5 937.92 -62.6 -49.9 -3.7 -53.6 -13.0 -40.6 6 998.06 -63.8 -49.7 -4.0 -53.7 -13.0 -40.7 Remarks: 1. ERP (dBm) = S.G Value (dBm) + Correction Factor (dB). 2. Correction Factor (dB) = Substitution Antenna Gain (dB) + Cable Loss (dB). Report No.: RF190507C02-8 Page No. 19 / 22 Report Format Version: 6.1.1

Above 1GHz LTE Band 26, Channel Bandwidth 10MHz TX channel 26740 Mode Frequency Range 1GHz~10GHz (819.0MHz) Environmental Conditions 24deg. C, 66%RH Input Power 120Vac, 60Hz Tested By Greg Lin Antenna Polarity & Test Distance: Horizontal at 3 M Reading S.G Power Correction No. Freq. (MHz) ERP (dBm) Limit (dBm) Margin (dB) (dBm) Value (dBm) Factor (dB) 1 1638.00 -72.2 -64.5 1.0 -63.5 -13.0 -50.5 Antenna Polarity & Test Distance: Vertical at 3 M Reading S.G Power Correction No. Freq. (MHz) ERP (dBm) Limit (dBm) Margin (dB) (dBm) Value (dBm) Factor (dB) 1 1638.00 -70.0 -62.7 1.0 -61.7 -13.0 -48.7 Remarks: 1. ERP (dBm) = S.G Value (dBm) + Correction Factor (dB). 2. Correction Factor (dB) = Substitution Antenna Gain (dB) + Cable Loss (dB). Report No.: RF190507C02-8 Page No. 20 / 22 Report Format Version: 6.1.1

5 Pictures of Test Arrangements Please refer to the attached file (Test Setup Photo). Report No.: RF190507C02-8 Page No. 21 / 22 Report Format Version: 6.1.1

Appendix – Information of the Testing Laboratories We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are FCC recognized accredited test firms and accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Lin Kou EMC/RF Lab Hsin Chu EMC/RF/Telecom Lab Tel: 886-2-26052180 Tel: 886-3-6668565 Fax: 886-2-26051924 Fax: 886-3-6668323 Hwa Ya EMC/RF/Safety Lab Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. --- END --- Report No.: RF190507C02-8 Page No. 22 / 22 Report Format Version: 6.1.1


Document Created: 2019-06-17 13:24:30
Document Modified: 2019-06-17 13:24:30
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC