NII Test Report

FCC ID: MSQI01WDX

Test Report

Download: PDF
FCCID_4334409

FCC Test Report (Spot Check) Report No.: RF190507C02-1 FCC ID: MSQI01WDX Original FCC ID: MSQI01WD Test Model: ASUS_I01WDX Received Date: May 07, 2019 Test Date: May 11 ~ May 17, 2019 Issued Date: May 29, 2019 Applicant: ASUSTek COMPUTER INC. Address: 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan (R.O.C.) Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN (R.O.C.) FCC Registration / 788550 / TW0003 Designation Number: This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF190507C02-1 Page No. 1 / 29 Report Format Version:6.1.2

Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity...................................................................................................................... 4 2 Summary of Test Results ..................................................................................................................... 5 2.1 Measurement Uncertainty ................................................................................................................... 5 2.2 Modification Record ............................................................................................................................ 5 3 General Information .............................................................................................................................. 6 3.1 General Description of EUT ................................................................................................................ 6 3.2 Description of Test Modes ................................................................................................................... 8 3.2.1 Test Mode Applicability and Tested Channel Detail........................................................................... 10 3.3 Description of Support Units ............................................................................................................. 12 3.3.1 Configuration of System under Test .................................................................................................. 12 3.4 General Description of Applied Standards ........................................................................................ 12 4 Test Types and Results ...................................................................................................................... 13 4.1 Radiated Emission and Bandedge Measurement............................................................................. 13 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 13 4.1.2 Test Instruments ................................................................................................................................ 14 4.1.3 Test Procedures................................................................................................................................. 15 4.1.4 Deviation from Test Standard ............................................................................................................ 15 4.1.5 Test Setup .......................................................................................................................................... 16 4.1.6 EUT Operating Conditions................................................................................................................. 17 4.1.7 Test Results ....................................................................................................................................... 18 4.2 Transmit Power Measurement .......................................................................................................... 21 4.2.1 Limits of Transmit Power Measurement ............................................................................................ 21 4.2.2 Test Setup .......................................................................................................................................... 21 4.2.3 Test Instruments ................................................................................................................................ 21 4.2.4 Test Procedure .................................................................................................................................. 22 4.2.5 Deviation from Test Standard ............................................................................................................ 22 4.2.6 EUT Operating Conditions................................................................................................................. 22 4.2.7 Test Result ......................................................................................................................................... 23 5 Pictures of Test Arrangements .......................................................................................................... 28 Appendix – Information of the Testing Laboratories ................................................................................. 29 Report No.: RF190507C02-1 Page No. 2 / 29 Report Format Version:6.1.2

Release Control Record Issue No. Description Date Issued RF190507C02-1 Original release May 29, 2019 Report No.: RF190507C02-1 Page No. 3 / 29 Report Format Version:6.1.2

1 Certificate of Conformity Product: ASUS Phone Brand: ASUS Test Model: ASUS_I01WDX Sample Status: Identical Prototype Applicant: ASUSTek COMPUTER INC. Test Date: May 11 ~ May 17, 2019 Standards: 47 CFR FCC Part 15, Subpart E (Section 15.407) ANSI C63.10:2013 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date: May 29, 2019 Pettie Chen / Senior Specialist Approved by : , Date: May 29, 2019 Bruce Chen / Project Engineer Report No.: RF190507C02-1 Page No. 4 / 29 Report Format Version:6.1.2

2 Summary of Test Results 47 CFR FCC Part 15, Subpart E (Section 15.407) FCC Test Item Result Remarks Clause Meet the requirement of limit. 15.407(b) Radiated Emissions & Band Pass Minimum passing margin is -1.5dB at (1/2/3/4(i/ii)/6) Edge Measurement 5725.00MHz. 15.407(a)(1/2/3) Max Average Transmit Power Pass Meet the requirement of limit. Note: 1. Determining compliance based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. 2.1 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: Expanded Uncertainty Measurement Frequency (k=2) (±) 9kHz ~ 30MHz 3.04 dB Radiated Emissions up to 1 GHz 30MHz ~ 200MHz 3.86 dB 200MHz ~1000MHz 3.87 dB 1GHz ~ 18GHz 2.29 dB Radiated Emissions above 1 GHz 18GHz ~ 40GHz 2.29 dB 2.2 Modification Record There were no modifications required for compliance. Report No.: RF190507C02-1 Page No. 5 / 29 Report Format Version:6.1.2

3 General Information 3.1 General Description of EUT Product ASUS Phone Brand ASUS Test Model ASUS_I01WDX Sample Status Identical Prototype 3.85 Vdc (Battery) Power Supply Rating 5 or 9 Vdc (Adapter) 5 Vdc (Host equipment) Modulation Type 256QAM, 64QAM, 16QAM, QPSK, BPSK Modulation Technology OFDM 802.11a: 54/48/36/24/18/12/9/6Mbps Transfer Rate 802.11n: up to 300Mbps 802.11ac: up to 867Mbps Operating Frequency 5180 ~ 5240MHz, 5260 ~ 5320MHz, 5500 ~ 5720MHz, 5745 ~ 5825MHz 5180 ~ 5240MHz: 802.11a, 802.11n (HT20), 802.11ac (VHT20): 4 802.11n (HT40), 802.11ac (VHT40): 2 802.11ac (VHT80): 1 5260 ~ 5320MHz: 802.11a, 802.11n (HT20), 802.11ac (VHT20): 4 802.11n (HT40), 802.11ac (VHT40): 2 802.11ac (VHT80): 1 Number of Channel 5500 ~ 5720MHz: 802.11a, 802.11n (HT20), 802.11ac (VHT20): 12 802.11n (HT40), 802.11ac (VHT40): 6 802.11ac (VHT80): 3 5745 ~ 5825MHz: 802.11a, 802.11n (HT20), 802.11ac (VHT20): 5 802.11n (HT40), 802.11ac (VHT40): 2 802.11ac (VHT80): 1 5180 ~ 5240MHz: 64.477mW 5260 ~ 5320MHz: 66.303mW Output Power 5500 ~ 5720MHz: 55.600mW 5745 ~ 5825MHz: 67.348mW Antenna Type Refer to Note as below Antenna Connector Refer to Note as below Accessory Device Refer to Note as below Cable Supplied Refer to Note as below Report No.: RF190507C02-1 Page No. 6 / 29 Report Format Version:6.1.2

Note: 1. This report is a supplementary report to the original BV CPS report no.: RF190114C07-1. Exhibit prepared for FCC Spot Check Verification report, the format, test items and amount of spot-check test data are decided by applicant's engineering judgment, for more details please refer to declaration letter exhibit. Conducted power and radiated emission verification test based on the worst channel refer to origingal report. 2. The EUT incorporates a MIMO function. Physically, the EUT provides 2 completed transmitters and 2 receivers. Modulation Mode TX Function 802.11a 2TX 802.11n (HT20) 2TX 802.11n (HT40) 2TX 802.11ac (VHT20) 2TX 802.11ac (VHT40) 2TX 802.11ac (VHT80) 2TX * The modulation and bandwidth are similar for 802.11n mode for 20MHz/40MHz and 802.11ac mode for 20MHz/40MHz, therefore investigated worst case to representative mode in test report. (Final test mode refer section 3.2.1) 3. The EUT accessories list refers to EUT Photo.pdf. 4. The following antennas were provided to the EUT. Gain (dBi) Ant. No. Type Connector 5.15-5.25 5.25-5.35 5.47-5.725 5.725-5.85 2.4GHz GHz GHz GHz GHz GPSL1/BT/WLAN PIFA NA -3.5 -3.7 -4.7 -1.4 -2.5 Antenna-0 GPSL5/WLAN PIFA NA -2.3 -2.2 -1.1 -0.7 -0.4 Antenna-1 Report No.: RF190507C02-1 Page No. 7 / 29 Report Format Version:6.1.2

3.2 Description of Test Modes For 5180 ~ 5240MHz: 4 channels are provided for 802.11a, 802.11n (HT20), 802.11ac (VHT20): Channel Frequency Channel Frequency 36 5180 MHz 44 5220 MHz 40 5200 MHz 48 5240 MHz 2 channels are provided for 802.11n (HT40), 802.11ac (VHT40): Channel Frequency Channel Frequency 38 5190 MHz 46 5230 MHz 1 channel is provided for 802.11ac (VHT80): Channel Frequency 42 5210MHz For 5260 ~ 5320MHz: 4 channels are provided for 802.11a, 802.11n (HT20), 802.11ac (VHT20): Channel Frequency Channel Frequency 52 5260 MHz 60 5300 MHz 56 5280 MHz 64 5320 MHz 2 channels are provided for 802.11n (HT40), 802.11ac (VHT40): Channel Frequency Channel Frequency 54 5270 MHz 62 5310 MHz 1 channel is provided for 802.11ac (VHT80): Channel Frequency 58 5290MHz Report No.: RF190507C02-1 Page No. 8 / 29 Report Format Version:6.1.2

For 5500 ~ 5720MHz: 12 channels are provided for 802.11a, 802.11n (HT20), 802.11ac (VHT20): Channel Frequency Channel Frequency 100 5500 MHz 124 5620 MHz 104 5520 MHz 128 5640 MHz 108 5540 MHz 132 5660 MHz 112 5560 MHz 136 5680 MHz 116 5580 MHz 140 5700 MHz 120 5600 MHz 144 5720 MHz 6 channels are provided for 802.11n (HT40), 802.11ac (VHT40): Channel Frequency Channel Frequency 102 5510 MHz 126 5630 MHz 110 5550 MHz 134 5670 MHz 118 5590 MHz 142 5710 MHz 3 channels are provided for 802.11ac (VHT80): Channel Frequency Channel Frequency 106 5530 MHz 122 5610 MHz 138 5690 MHz For 5745 ~ 5825MHz: 5 channels are provided for 802.11a, 802.11n (HT20), 802.11ac (VHT20): Channel Frequency Channel Frequency 149 5745MHz 161 5805MHz 153 5765MHz 165 5825MHz 157 5785MHz 2 channels are provided for 802.11n (HT40), 802.11ac (VHT40): Channel Frequency Channel Frequency 151 5755MHz 159 5795MHz 1 channel is provided for 802.11ac (VHT80): Channel Frequency 155 5775MHz Report No.: RF190507C02-1 Page No. 9 / 29 Report Format Version:6.1.2

3.2.1 Test Mode Applicability and Tested Channel Detail EUT Configure Applicable to Description Mode RE1G RE<1G P - √ √ √ - Where RE1G: Radiated Emission above 1GHz & Bandedge RE<1G: Radiated Emission below 1GHz Measurement P: Conducted Output Power Measurement Note: The EUT had been pre-tested on the positioned of each 3 axis. The worst case was found when positioned on X-plane. Radiated Emission Test (Above 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Configure Frequency Available Modulation Data Rate Mode Tested Channel Mode Band (MHz) Channel Technology (Mbps) - 802.11n (HT40) 5180-5240 38 to 46 OFDM 13.5 - 802.11n (HT40) 5260-5320 54 to 62 OFDM 13.5 134 - 802.11n (HT40) 5500-5720 102 to 142 OFDM 13.5 - 802.11n (HT40) 5745-5825 151 to 159 OFDM 13.5 Radiated Emission Test (Below 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Configure Frequency Available Modulation Data Rate Mode Tested Channel Mode Band (MHz) Channel Technology (Mbps) - 802.11n (HT40) 5180-5240 38 to 46 OFDM 13.5 - 802.11n (HT40) 5260-5320 54 to 62 OFDM 13.5 134 - 802.11n (HT40) 5500-5720 102 to 142 OFDM 13.5 - 802.11n (HT40) 5745-5825 151 to 159 OFDM 13.5 Report No.: RF190507C02-1 Page No. 10 / 29 Report Format Version:6.1.2

Conducted Output Power Measurement: This item includes all test value of each mode, but only includes spectrum plot of worst value of each mode. Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Configure Frequency Available Modulation Data Rate Mode Tested Channel Mode Band (MHz) Channel Technology (Mbps) 802.11a 36 to 48 36, 40, 48 OFDM 6.0 802.11n (HT20) 36 to 48 36, 40, 48 OFDM 6.5 - 5180-5240 802.11n (HT40) 38 to 46 38, 46 OFDM 13.5 802.11ac (VHT80) 42 42 OFDM 29.3 802.11a 52 to 64 52, 60, 64 OFDM 6.0 802.11n (HT20) 52 to 64 52, 60, 64 OFDM 6.5 - 5260-5320 802.11n (HT40) 54 to 62 54, 62 OFDM 13.5 802.11ac (VHT80) 58 58 OFDM 29.3 802.11a 100 to 144 100, 116, 140, 144 OFDM 6.0 802.11n (HT20) 100 to 144 100, 116, 140, 144 OFDM 6.5 - 5500-5720 802.11n (HT40) 102 to 142 102, 110, 134, 142 OFDM 13.5 802.11ac (VHT80) 106 to 138 106, 122, 138 OFDM 29.3 802.11a 149 to 165 149, 157, 165 OFDM 6.0 802.11n (HT20) 149 to 165 149, 157, 165 OFDM 6.5 - 5745-5825 802.11n (HT40) 151 to 159 151, 159 OFDM 13.5 802.11ac (VHT80) 155 155 OFDM 29.3 Test Condition: Applicable to Environmental Conditions Input Power Tested by RE1G 22 deg. C, 66% RH 120Vac, 60Hz Greg Lin RE<1G 24 deg. C, 64% RH 120Vac, 60Hz Match Tsui P 25 deg. C, 60% RH 120Vac, 60Hz Chris Lin Report No.: RF190507C02-1 Page No. 11 / 29 Report Format Version:6.1.2

3.3 Description of Support Units The EUT has been tested as an independent unit. 3.3.1 Configuration of System under Test Earphone (EUT) EUT Adapter (EUT) 3.4 General Description of Applied Standards The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart E (15.407) KDB 789033 D02 General UNII Test Procedure New Rules v02r01 KDB 662911 D01 Multiple Transmitter Output v02r01 ANSI C63.10:2013 All test items have been performed and recorded as per the above standards. Report No.: RF190507C02-1 Page No. 12 / 29 Report Format Version:6.1.2

4 Test Types and Results 4.1 Radiated Emission and Bandedge Measurement 4.1.1 Limits of Radiated Emission and Bandedge Measurement Radiated emissions which fall in the restricted bands must comply with the radiated emission limits specified as below table. Frequencies (MHz) Field Strength (microvolts/meter) Measurement Distance (meters) 0.009 ~ 0.490 2400/F(kHz) 300 0.490 ~ 1.705 24000/F(kHz) 30 1.705 ~ 30.0 30 30 30 ~ 88 100 3 88 ~ 216 150 3 216 ~ 960 200 3 Above 960 500 3 Note: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Limits of unwanted emission out of the restricted bands Applicable To Limit 789033 D02 General UNII Test Procedure Field Strength at 3m New Rules v02r01 PK: 74 (dBµV/m) AV: 54 (dBµV/m) Equivalent Field Strength at Frequency Band Applicable To EIRP Limit 3m 5150~5250 MHz 15.407(b)(1) 5250~5350 MHz 15.407(b)(2) PK: -27 (dBm/MHz) PK: 68.2(dBµV/m) 5470~5725 MHz 15.407(b)(3) PK: -27 (dBm/MHz) *1 PK: 68.2(dBµV/m) *1 *2 PK: 10 (dBm/MHz) PK: 105.2 (dBµV/m) *2 15.407(b)(4)(i) *3 5725~5850 MHz PK: 15.6 (dBm/MHz) PK: 110.8(dBµV/m) *3 *4 PK: 27 (dBm/MHz) PK: 122.2 (dBµV/m) *4 15.407(b)(4)(ii) Emission limits in section 15.247(d) *2 *1 below the band edge increasing linearly to 10 beyond 75 MHz or more above of the band edge. dBm/MHz at 25 MHz above. *3 below the band edge increasing linearly to a level *4 from 5 MHz above or below the band edge of 15.6 dBm/MHz at 5 MHz above. increasing linearly to a level of 27 dBm/MHz at the band edge. Note: The following formula is used to convert the equipment isotropic radiated power (eirp) to field strength: 1000000 30 P E= µV/m, where P is the eirp (Watts). 3 Report No.: RF190507C02-1 Page No. 13 / 29 Report Format Version:6.1.2

4.1.2 Test Instruments Description & Model No. Serial No. Cal. Date Cal. Due Manufacturer Test Receiver ESIB7 100187 May 29, 2018 May 28, 2019 ROHDE & SCHWARZ Spectrum Analyzer FSU43 100115 Jan. 21, 2019 Jan. 20, 2020 ROHDE & SCHWARZ Spectrum Analyzer FSP40 100040 Sep. 25, 2018 Sep. 24, 2019 ROHDE & SCHWARZ BILOG Antenna VULB9168 9168-171 Nov. 22, 2018 Nov. 21, 2019 SCHWARZBECK HORN Antenna 9120D 209 Nov. 25, 2018 Nov. 24, 2019 SCHWARZBECK HORN Antenna BBHA 9170 BBHA9170241 Nov. 25, 2018 Nov. 24, 2019 SCHWARZBECK Loop Antenna HLA 6121 45745 Jun. 14, 2018 Jun. 13, 2019 TESEQ Preamplifier Agilent 8447D 2944A10738 Aug. 21, 2018 Aug. 20, 2019 (Below 1GHz) Preamplifier KEYSIGHT 83017A MY53270295 Jul. 02, 2018 Jul. 01, 2019 (Above 1GHz) RF signal cable WOKEN 8D-FB Cable-CH3-01 Aug. 21, 2018 Aug. 20, 2019 RF signal cable SUCOFLEX 104 Cable-CH3-03 (223653/4) Aug. 21, 2018 Aug. 20, 2019 HUBER+SUHNER RF signal cable SUCOFLEX Cable-CH3-03 HUBER+SUHNER& 104&EMC104-SM-S Aug. 21, 2018 Aug. 20, 2019 (309224+170907) EMCI M-8000 Software ADT_Radiated_ NA NA NA BV ADT V7.6.15.9.5 Antenna Tower MA 4000 013303 NA NA inn-co GmbH Antenna Tower Controller AT100 AT93021702 NA NA BV ADT Turn Table TT100 TT93021702 NA NA BV ADT Turn Table Controller SC100 SC93021702 NA NA BV ADT Boresight Antenna Fixture FBA-01 FBA-SIP01 NA NA Pre-amplifier (18GHz-40GHz) EMC184045B 980175 Nov. 14, 2018 Nov. 13, 2019 EMC USB Wideband Power MY55050005/MY5519000 Sensor U2021XA 4/MY55190007/MY55210 Jul. 17, 2018 Jul. 16, 2019 KEYSIGHT 005 Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in HwaYa Chamber 3. 3. The horn antenna and preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. Report No.: RF190507C02-1 Page No. 14 / 29 Report Format Version:6.1.2

4.1.3 Test Procedures For Radiated emission below 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter chamber room. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. Parallel, perpendicular, and ground-parallel orientations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Quasi-Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 9kHz at frequency below 30MHz. For Radiated emission above 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters (for 30MHz ~ 1GHz) / 1.5 meters (for above 1GHz) above the ground at 3 meter chamber room for test. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Peak detection (PK) at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is ≥ 1/T (Duty cycle < 98%) or 10Hz (Duty cycle ≥ 98%) for Average detection (AV) at frequency above 1GHz. 4. All modes of operation were investigated and the worst-case emissions are reported. 4.1.4 Deviation from Test Standard No deviation. Report No.: RF190507C02-1 Page No. 15 / 29 Report Format Version:6.1.2

4.1.5 Test Setup For Radiated emission below 30MHz 1m EUT& 3m Support Units Turn Table 80cm Ground Plane Test Receiver For Radiated emission 30MHz to 1GHz Ant. Tower 1-4m Variable 3m 10m EUT& Support Units Turn Table 80cm Ground Plane Test Receiver Report No.: RF190507C02-1 Page No. 16 / 29 Report Format Version:6.1.2

For Radiated emission above 1GHz Ant. Tower 1-4m Variable EUT& 3m Support Units Turn Table Absorber 150cm Ground Plane Test Receiver For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.1.6 EUT Operating Conditions a. Set the EUT under transmission condition continuously at specific channel frequency. Report No.: RF190507C02-1 Page No. 17 / 29 Report Format Version:6.1.2

4.1.7 Test Results Above 1GHz data: 802.11n (HT40) CHANNEL TX Channel 134 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 40GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 *5670.00 101.3 PK 1.32 H 207 62.8 38.5 2 *5670.00 90.8 AV 1.32 H 207 52.3 38.5 3 #5725.00 65.3 PK 68.2 -2.9 1.49 H 216 61.2 4.1 4 11340.00 58.4 PK 74.0 -15.6 2.17 H 268 41.8 16.6 5 11340.00 45.2 AV 54.0 -8.8 2.17 H 268 28.6 16.6 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 *5670.00 102.1 PK 3.52 V 104 63.6 38.5 2 *5670.00 91.6 AV 3.52 V 104 53.1 38.5 3 #5725.00 66.7 PK 68.2 -1.5 3.61 V 114 62.6 4.1 4 11340.00 58.8 PK 74.0 -15.2 1.76 V 247 42.2 16.6 5 11340.00 45.7 AV 54.0 -8.3 1.76 V 247 29.1 16.6 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency 6. " # ": The radiated frequency is out of the restricted band Report No.: RF190507C02-1 Page No. 18 / 29 Report Format Version:6.1.2

Below 1GHz Worst-Case Data: 802.11n (HT40) CHANNEL TX Channel 134 DETECTOR Quasi-Peak (QP) FREQUENCY RANGE 9kHz ~ 1GHz FUNCTION ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 38.73 30.7 QP 40.0 -9.3 1.00 H 43 41.1 -10.4 2 66.86 26.4 QP 40.0 -13.6 1.00 H 288 37.4 -11.0 3 837.04 32.4 QP 46.0 -13.6 1.00 H 265 30.1 2.3 4 892.33 33.1 QP 46.0 -12.9 1.49 H 90 30.3 2.8 5 919.49 35.7 QP 46.0 -10.3 1.00 H 240 32.0 3.7 6 936.95 34.8 QP 46.0 -11.2 1.49 H 325 30.9 3.9 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit of frequency range 30MHz ~ 1000MHz 4. Margin value = Emission Level – Limit value 5. The emission levels were very low against the limit of frequency range 9kHz ~ 30MHz: the amplitude of spurious emissions attenuated more than 20 dB below the permissible value to be report Report No.: RF190507C02-1 Page No. 19 / 29 Report Format Version:6.1.2

CHANNEL TX Channel 134 DETECTOR Quasi-Peak (QP) FREQUENCY RANGE 9kHz ~ 1GHz FUNCTION ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 30.00 30.4 QP 40.0 -9.6 1.00 V 204 41.6 -11.2 2 81.41 30.0 QP 40.0 -10.0 1.50 V 184 44.3 -14.3 3 152.22 33.7 QP 43.5 -9.8 1.50 V 283 43.1 -9.4 4 166.77 33.2 QP 43.5 -10.3 1.50 V 140 42.5 -9.3 5 880.69 32.9 QP 46.0 -13.1 1.00 V 210 30.3 2.6 6 919.49 34.4 QP 46.0 -11.6 1.00 V 5 30.7 3.7 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit of frequency range 30MHz ~ 1000MHz 4. Margin value = Emission Level – Limit value 5. The emission levels were very low against the limit of frequency range 9kHz ~ 30MHz: the amplitude of spurious emissions attenuated more than 20 dB below the permissible value to be report Report No.: RF190507C02-1 Page No. 20 / 29 Report Format Version:6.1.2

4.2 Transmit Power Measurement 4.2.1 Limits of Transmit Power Measurement Operation EUT Category Limit Band 1 Watt (30 dBm) (Max. e.i.r.p ≦ 125mW(21 dBm) at any elevation Outdoor Access Point angle above 30 degrees as measured from the horizon) U-NII-1 Fixed point-to-point Access Point 1 Watt (30 dBm) Indoor Access Point 1 Watt (30 dBm)  Mobile and Portable client device 250mW (24 dBm) U-NII-2A  250mW (24 dBm) or 11 dBm+10 log B* U-NII-2C  250mW (24 dBm) or 11 dBm+10 log B* U-NII-3  1 Watt (30 dBm) *B is the 26 dB emission bandwidth in megahertz Per KDB 662911 Method of conducted output power measurement on IEEE 802.11 devices, Array Gain = 0 dB (i.e., no array gain) for NANT ≤ 4; Array Gain = 0 dB (i.e., no array gain) for channel widths ≥ 40 MHz for any NANT; Array Gain = 5 log(NANT/NSS) dB or 3 dB, whichever is less for 20-MHz channel widths with NANT ≥ 5. For power measurements on all other devices: Array Gain = 10 log(NANT/NSS) dB. 4.2.2 Test Setup For Power Output Power Meter EUT (Including Attenuator Power Sensor) For 26dB Bandwidth Spectrum EUT Attenuator Analyzer 4.2.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. Report No.: RF190507C02-1 Page No. 21 / 29 Report Format Version:6.1.2

4.2.4 Test Procedure For Average Power Measurement Method PM is used to perform output power measurement, trigger and gating function of wide band power meter is enabled to measure max output power of TX on burst and set the detector to average. Duty factor is not added to measured value. For 26dB Bandwidth a. Set RBW = approximately 1% of the emission bandwidth. b. Set the VBW > RBW. c. Detector = Peak. d. Trace mode = max hold. e. Measure the maximum width of the emission that is 26 dB down from the peak of the emission. Compare this with the RBW setting of the analyzer. Readjust RBW and repeat measurement as needed until the RBW/EBW ratio is approximately 1%. 4.2.5 Deviation from Test Standard No deviation. 4.2.6 EUT Operating Conditions The software provided by client to enable the EUT under transmission condition continuously at lowest, middle and highest channel frequencies individually. Report No.: RF190507C02-1 Page No. 22 / 29 Report Format Version:6.1.2

4.2.7 Test Result Power Output: 802.11a Maximum Conducted Power (dBm) Total Total Power Freq. Pass / Chan. Power Power Limit (MHz) Chain 0 Chain 1 Fail (mW) (dBm) (dBm) 36 5180 14.72 15.23 62.991 17.99 24.00 Pass 40 5200 14.83 15.13 62.993 17.99 24.00 Pass 48 5240 14.90 15.26 64.477 18.09 24.00 Pass 52 5260 14.89 15.03 62.674 17.97 24.00 Pass 60 5300 15.08 15.27 65.862 18.19 24.00 Pass 64 5320 15.20 15.21 66.303 18.22 24.00 Pass 100 5500 14.52 14.20 54.617 17.37 24.00 Pass 116 5580 14.51 14.13 54.131 17.33 24.00 Pass 140 5700 14.50 14.38 55.600 17.45 24.00 Pass 144 5720 11.46 11.33 27.579 14.41 23.06 Pass (For U-NII-2C) 5720 144 4.90 4.86 6.152 7.89 30.00 Pass (For U-NII-3) 149 5745 14.98 14.95 62.738 17.98 30.00 Pass 157 5785 15.43 15.11 67.348 18.28 30.00 Pass 165 5825 15.32 15.10 66.400 18.22 30.00 Pass Note: For U-NII-2A, U-NII-2C Band: Chain 0 1. 11dBm + 10log (23.17) = 24.64 > 24dBm 2. 11dBm + 10log (23.03) = 24.62 > 24dBm 3. 11dBm + 10log (22.20) = 24.46 > 24dBm 4. 11dBm + 10log (22.51) = 24.52 > 24dBm 5. 11dBm + 10log (23.56) = 24.72 > 24dBm 6. 11dBm + 10log (23.17) = 24.64 > 24dBm 7. 11dBm + 10log (5725.00 - 5708.74) = 23.11 < 24dBm Chain 1 1. 11dBm + 10log (22.82) = 24.58 > 24dBm 2. 11dBm + 10log (22.85) = 24.58 > 24dBm 3. 11dBm + 10log (22.65) = 24.55 > 24dBm 4. 11dBm + 10log (22.44) = 24.51 > 24dBm 5. 11dBm + 10log (22.00) = 24.42 > 24dBm 6. 11dBm + 10log (22.39) = 24.50 > 24dBm 7. 11dBm + 10log (5725.00 - 5708.93) = 23.06 < 24dBm Report No.: RF190507C02-1 Page No. 23 / 29 Report Format Version:6.1.2

For Reference only-Power meter value The power value was measured by power meter with average sensor Chan. Freq. (MHz) Conducted Power (mW) Conducted Power (dBm) 144 5720 35.24 15.47 Report No.: RF190507C02-1 Page No. 24 / 29 Report Format Version:6.1.2

802.11n (HT20) Maximum Conducted Power (dBm) Total Total Power Freq. Pass / Chan. Power Power Limit (MHz) Chain 0 Chain 1 Fail (mW) (dBm) (dBm) 36 5180 14.03 13.56 47.992 16.81 24.00 Pass 40 5200 13.85 14.05 49.676 16.96 24.00 Pass 48 5240 14.01 14.17 51.298 17.10 24.00 Pass 52 5260 14.23 14.12 52.308 17.19 24.00 Pass 60 5300 14.23 14.01 51.662 17.13 24.00 Pass 64 5320 14.32 14.11 52.803 17.23 24.00 Pass 100 5500 13.80 13.09 44.359 16.47 24.00 Pass 116 5580 13.68 13.00 43.287 16.36 24.00 Pass 140 5700 13.56 13.13 43.258 16.36 24.00 Pass 144 5720 10.38 10.52 22.186 13.46 23.20 Pass (For U-NII-2C) 5720 144 4.43 4.30 5.465 7.38 30.00 Pass (For U-NII-3) 149 5745 14.17 14.03 51.415 17.11 30.00 Pass 157 5785 14.37 14.15 53.354 17.27 30.00 Pass 165 5825 14.24 14.12 52.369 17.19 30.00 Pass Note: For U-NII-2A, U-NII-2C Band: Chain 0 1. 11dBm + 10log (25.26) = 25.02 > 24dBm 2. 11dBm + 10log (23.18) = 24.65 > 24dBm 3. 11dBm + 10log (24.90) = 24.96 > 24dBm 4. 11dBm + 10log (24.00) = 24.80 > 24dBm 5. 11dBm + 10log (23.93) = 24.78 > 24dBm 6. 11dBm + 10log (23.69) = 24.74 > 24dBm 7. 11dBm + 10log (5725.00 - 5708.37) = 23.20 < 24dBm Chain 1 1. 11dBm + 10log (23.42) = 24.69 > 24dBm 2. 11dBm + 10log (23.66) = 24.74 > 24dBm 3. 11dBm + 10log (23.79) = 24.76 > 24dBm 4. 11dBm + 10log (23.35) = 24.68 > 24dBm 5. 11dBm + 10log (24.78) = 24.94 > 24dBm 6. 11dBm + 10log (23.31) = 24.67 > 24dBm 7. 11dBm + 10log (5725.00 - 5708.33) = 23.21 < 24dBm For Reference only-Power meter value The power value was measured by power meter with average sensor Chan. Freq. (MHz) Conducted Power (mW) Conducted Power (dBm) 144 5720 27.102 14.33 Report No.: RF190507C02-1 Page No. 25 / 29 Report Format Version:6.1.2

802.11n (HT40) Maximum Conducted Power (dBm) Total Total Power Freq. Pass / Chan. Power Power Limit (MHz) Chain 0 Chain 1 Fail (mW) (dBm) (dBm) 38 5190 14.21 13.79 50.296 17.02 24.00 Pass 46 5230 13.91 13.87 48.982 16.90 24.00 Pass 54 5270 14.13 13.99 50.943 17.07 24.00 Pass 62 5310 14.33 14.21 53.465 17.28 24.00 Pass 102 5510 13.45 12.92 41.719 16.20 24.00 Pass 110 5550 13.46 12.89 41.636 16.19 24.00 Pass 134 5670 13.52 13.03 42.581 16.29 24.00 Pass 142 5710 9.42 9.60 17.870 12.52 24.00 Pass (For U-NII-2C) 142 5710 -1.02 -1.44 1.508 1.79 30.00 Pass (For U-NII-3) 151 5755 14.15 13.70 49.444 16.94 30.00 Pass 159 5795 14.20 13.95 51.134 17.09 30.00 Pass Note: For U-NII-2A, U-NII-2C Band: Chain 0 1. 11dBm + 10log (41.96) = 27.22 > 24dBm 2. 11dBm + 10log (42.14) = 27.24 > 24dBm 3. 11dBm + 10log (42.14) = 27.24 > 24dBm 4. 11dBm + 10log (42.04) = 27.23 > 24dBm 5. 11dBm + 10log (42.22) = 27.25 > 24dBm 6. 11dBm + 10log (5725.00 - 5689.11) = 26.54 > 24dBm Chain 1 1. 11dBm + 10log (42.02) = 27.23 > 24dBm 2. 11dBm + 10log (41.97) = 27.22 > 24dBm 3. 11dBm + 10log (42.49) = 27.28 > 24dBm 4. 11dBm + 10log (42.67) = 27.30 > 24dBm 5. 11dBm + 10log (42.24) = 27.25 > 24dBm 6. 11dBm + 10log (5725.00 - 5688.89) = 26.57 > 24dBm For Reference only-Power meter value The power value was measured by power meter with average sensor Chan. Freq. (MHz) Conducted Power (mW) Conducted Power (dBm) 142 5710 20.845 13.19 Report No.: RF190507C02-1 Page No. 26 / 29 Report Format Version:6.1.2

802.11ac (VHT80) Maximum Conducted Power (dBm) Total Total Power Freq. Pass / Chan. Power Power Limit (MHz) Chain 0 Chain 1 Fail (mW) (dBm) (dBm) 42 5210 13.03 12.87 39.455 15.96 24.00 Pass 58 5290 13.07 13.08 40.600 16.09 24.00 Pass 106 5530 12.52 12.08 34.008 15.32 24.00 Pass 122 5610 12.54 12.15 34.353 15.36 24.00 Pass 5690 138 8.03 8.15 12.885 11.10 24.00 Pass (For U-NII-2C) 5690 138 -5.13 -5.76 0.572 -2.42 30.00 Pass (For U-NII-3) 155 5775 13.38 13.06 42.007 16.23 30.00 Pass Note: For U-NII-2A, U-NII-2C Band: Chain 0 1. 11dBm + 10log (83.39) = 30.21 > 24dBm 2. 11dBm + 10log (84.41) = 30.26 > 24dBm 3. 11dBm + 10log (84.64) = 30.27 > 24dBm 4. 11dBm + 10log (5725.00 - 5647.94) = 29.87 > 24dBm Chain 1 1. 11dBm + 10log (83.82) = 30.23 > 24dBm 2. 11dBm + 10log (83.57) = 30.22 > 24dBm 3. 11dBm + 10log (84.14) = 30.25 > 24dBm 4. 11dBm + 10log (5725.00 - 5648.75) = 29.82 > 24dBm For Reference only-Power meter value The power value was measured by power meter with average sensor Chan. Freq. (MHz) Conducted Power (mW) Conducted Power (dBm) 138 5690 13.932 11.44 Report No.: RF190507C02-1 Page No. 27 / 29 Report Format Version:6.1.2

5 Pictures of Test Arrangements Please refer to the attached file (Test Setup Photo). Report No.: RF190507C02-1 Page No. 28 / 29 Report Format Version:6.1.2

Appendix – Information of the Testing Laboratories We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are FCC recognized accredited test firms and accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Lin Kou EMC/RF Lab Hsin Chu EMC/RF/Telecom Lab Tel: 886-2-26052180 Tel: 886-3-6668565 Fax: 886-2-26051924 Fax: 886-3-6668323 Hwa Ya EMC/RF/Safety Lab Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. --- END --- Report No.: RF190507C02-1 Page No. 29 / 29 Report Format Version:6.1.2


Document Created: 2019-06-17 13:20:45
Document Modified: 2019-06-17 13:20:45
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC