DSS Test Report

FCC ID: MSQI01WDX

Test Report

Download: PDF
FCCID_4334120

FCC Test Report (Spot Check) Report No.: RF190507C02-3 FCC ID: MSQI01WDX Original FCC ID: MSQI01WD Test Model: ASUS_I01WDX Received Date: May 07, 2019 Test Date: May 11 ~ May 16, 2019 Issued Date: May 29, 2019 Applicant: ASUSTek COMPUTER INC. Address: 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan (R.O.C.) Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN (R.O.C.) FCC Registration / 788550 / TW0003 Designation Number: This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF190507C02-3 Page No. 1 / 21 Report Format Version: 6.1.1

Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity...................................................................................................................... 4 2 Summary of Test Results ..................................................................................................................... 5 2.1 Measurement Uncertainty ................................................................................................................... 5 2.2 Modification Record ............................................................................................................................ 5 3 General Information .............................................................................................................................. 6 3.1 General Description of EUT ................................................................................................................ 6 3.2 Description of Test Modes ................................................................................................................... 7 3.2.1 Test Mode Applicability and Tested Channel Detail............................................................................. 8 3.3 Description of Support Units ............................................................................................................... 9 3.3.1 Configuration of System under Test .................................................................................................... 9 3.4 General Description of Applied Standards .......................................................................................... 9 4 Test Types and Results ...................................................................................................................... 10 4.1 Radiated Emission and Bandedge Measurement............................................................................. 10 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 10 4.1.2 Test Instruments ................................................................................................................................. 11 4.1.3 Test Procedures................................................................................................................................. 12 4.1.4 Deviation from Test Standard ............................................................................................................ 12 4.1.5 Test Setup .......................................................................................................................................... 13 4.1.6 EUT Operating Conditions................................................................................................................. 14 4.1.7 Test Results ....................................................................................................................................... 15 4.2 Maximum Output Power.................................................................................................................... 18 4.2.1 Limits of Maximum Output Power Measurement .............................................................................. 18 4.2.2 Test Setup .......................................................................................................................................... 18 4.2.3 Test Instruments ................................................................................................................................ 18 4.2.4 Test Procedure .................................................................................................................................. 18 4.2.5 Deviation fromTest Standard ............................................................................................................. 18 4.2.6 EUT Operating Condition .................................................................................................................. 18 4.2.7 Test Results ....................................................................................................................................... 19 5 Pictures of Test Arrangements .......................................................................................................... 20 Appendix – Information of the Testing Laboratories ................................................................................. 21 Report No.: RF190507C02-3 Page No. 2 / 21 Report Format Version: 6.1.1

Release Control Record Issue No. Description Date Issued RF190507C02-3 Original release May 29, 2019 Report No.: RF190507C02-3 Page No. 3 / 21 Report Format Version: 6.1.1

1 Certificate of Conformity Product: ASUS Phone Brand: ASUS Test Model: ASUS_I01WDX Sample Status: Identical Prototype Applicant: ASUSTek COMPUTER INC. Test Date: May 11 ~ May 16, 2019 Standards: 47 CFR FCC Part 15, Subpart C (Section 15.247) ANSI C63.10:2013 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date: May 29, 2019 Pettie Chen / Senior Specialist Approved by : , Date: May 29, 2019 Bruce Chen / Project Engineer Report No.: RF190507C02-3 Page No. 4 / 21 Report Format Version: 6.1.1

2 Summary of Test Results 47 CFR FCC Part 15, Subpart C (Section 15.247) FCC Test Item Result Remarks Clause 15.247(a)(1) Maximum Peak Output Power Pass Meet the requirement of limit. 15.205 & 209 Meet the requirement of limit. Radiated Emissions & Band Edge & Pass Minimum passing margin is -6.6dB at Measurement 15.247(d) 2483.50MHz. Note: 1. If The Frequency Hopping System operating in 2400-2483.5MHz band and the output power less than 125mW. The hopping channel carrier frequencies separated by a minimum of 25kHz or two-thirds of the 20dB bandwidth of hopping channel whichever is greater. 2. Determining compliance based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. 2.1 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: Expanded Uncertainty Measurement Frequency (k=2) (±) 9kHz ~ 30MHz 3.04 dB Radiated Emissions up to 1 GHz 30MHz ~ 200MHz 3.86 dB 200MHz ~1000MHz 3.87 dB 1GHz ~ 18GHz 2.29 dB Radiated Emissions above 1 GHz 18GHz ~ 40GHz 2.29 dB 2.2 Modification Record There were no modifications required for compliance. Report No.: RF190507C02-3 Page No. 5 / 21 Report Format Version: 6.1.1

3 General Information 3.1 General Description of EUT Product ASUS Phone Brand ASUS Test Model ASUS_I01WDX Sample Status Identical Prototype 3.85 Vdc (Battery) Power Supply Rating 5 or 9 Vdc (Adapter) 5 Vdc (Host equipment) Modulation Type GFSK, π/4-DQPSK, 8DPSK Modulation Technology FHSS Transfer Rate 1/2/3Mbps Operating Frequency 2402~2480MHz Number of Channel 79 Output Power 17.742mW Antenna Type PIFA antenna with -3.5dBi gain Antenna Connector NA Accessory Device Refer to Note as below Cable Supplied Refer to Note as below Note: 1. This report is a supplementary report to the original BV CPS report no.: RF190114C07-4. Exhibit prepared for FCC Spot Check Verification report, the format, test items and amount of spot-check test data are decided by applicant's engineering judgment, for more details please refer to declaration letter exhibit. Conducted power and radiated emission verification test based on the worst output power channel. 2. The EUT accessories list refers to EUT Photo.pdf. Report No.: RF190507C02-3 Page No. 6 / 21 Report Format Version: 6.1.1

3.2 Description of Test Modes 79 channels are provided to this EUT: Channel Freq. (MHz) Channel Freq. (MHz) Channel Freq. (MHz) Channel Freq. (MHz) 0 2402 20 2422 40 2442 60 2462 1 2403 21 2423 41 2443 61 2463 2 2404 22 2424 42 2444 62 2464 3 2405 23 2425 43 2445 63 2465 4 2406 24 2426 44 2446 64 2466 5 2407 25 2427 45 2447 65 2467 6 2408 26 2428 46 2448 66 2468 7 2409 27 2429 47 2449 67 2469 8 2410 28 2430 48 2450 68 2470 9 2411 29 2431 49 2451 69 2471 10 2412 30 2432 50 2452 70 2472 11 2413 31 2433 51 2453 71 2473 12 2414 32 2434 52 2454 72 2474 13 2415 33 2435 53 2455 73 2475 14 2416 34 2436 54 2456 74 2476 15 2417 35 2437 55 2457 75 2477 16 2418 36 2438 56 2458 76 2478 17 2419 37 2439 57 2459 77 2479 18 2420 38 2440 58 2460 78 2480 19 2421 39 2441 59 2461 Report No.: RF190507C02-3 Page No. 7 / 21 Report Format Version: 6.1.1

3.2.1 Test Mode Applicability and Tested Channel Detail EUT Configure Applicable to Description Mode RE1G RE<1G P - √ √ √ - Where RE1G: Radiated Emission above 1GHz & Bandedge RE<1G: Radiated Emission below 1GHz Measurement P: Conducted Output Power Measurement Note: The EUT had been pre-tested on the positioned of each 3 axis. The worst case was found when positioned on X-plane. Radiated Emission Test (Above 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Configure Modulation Available Channel Tested Channel Modulation Type Pakcet Type Mode Technology - 0 to 78 78 FHSS 8DPSK 3DH5 Radiated Emission Test (Below 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Configure Modulation Available Channel Tested Channel Modulation Type Pakcet Type Mode Technology - 0 to 78 78 FHSS 8DPSK 3DH5 Conducted Output Power Measurement: This item includes all test value of each mode, but only includes spectrum plot of worst value of each mode. Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Configure Modulation Available Channel Tested Channel Modulation Type Pakcet Type Mode Technology - 0 to 78 0, 39, 78 FHSS GFSK DH5 - 0 to 78 0, 39, 78 FHSS 8DPSK 3DH5 Test Condition: Applicable to Environmental Conditions Input Power Tested by RE1G 22 deg. C, 66% RH 120Vac, 60Hz Greg Lin RE<1G 24 deg. C, 64% RH 120Vac, 60Hz Match Tsui P 25 deg. C, 60% RH 120Vac, 60Hz Chris Lin Report No.: RF190507C02-3 Page No. 8 / 21 Report Format Version: 6.1.1

3.3 Description of Support Units The EUT has been tested as an independent unit. 3.3.1 Configuration of System under Test Earphone (EUT) EUT Adapter (EUT) 3.4 General Description of Applied Standards The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart C (15.247) KDB 558074 D01 15.247 Meas Guidance v05r02 ANSI C63.10:2013 All test items have been performed and recorded as per the above standards. Report No.: RF190507C02-3 Page No. 9 / 21 Report Format Version: 6.1.1

4 Test Types and Results 4.1 Radiated Emission and Bandedge Measurement 4.1.1 Limits of Radiated Emission and Bandedge Measurement Radiated emissions which fall in the restricted bands must comply with the radiated emission limits specified as below table. Other emissions shall be at least 20dB below the highest level of the desired power: Frequencies (MHz) Field Strength (microvolts/meter) Measurement Distance (meters) 0.009 ~ 0.490 2400/F(kHz) 300 0.490 ~ 1.705 24000/F(kHz) 30 1.705 ~ 30.0 30 30 30 ~ 88 100 3 88 ~ 216 150 3 216 ~ 960 200 3 Above 960 500 3 Note: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Report No.: RF190507C02-3 Page No. 10 / 21 Report Format Version: 6.1.1

4.1.2 Test Instruments Description & Model No. Serial No. Cal. Date Cal. Due Manufacturer Test Receiver ESIB7 100187 May 29, 2018 May 28, 2019 ROHDE & SCHWARZ Spectrum Analyzer FSU43 100115 Jan. 21, 2019 Jan. 20, 2020 ROHDE & SCHWARZ Spectrum Analyzer FSP40 100040 Sep. 25, 2018 Sep. 24, 2019 ROHDE & SCHWARZ BILOG Antenna VULB9168 9168-171 Nov. 22, 2018 Nov. 21, 2019 SCHWARZBECK HORN Antenna 9120D 209 Nov. 25, 2018 Nov. 24, 2019 SCHWARZBECK HORN Antenna BBHA 9170 BBHA9170241 Nov. 25, 2018 Nov. 24, 2019 SCHWARZBECK Loop Antenna HLA 6121 45745 Jun. 14, 2018 Jun. 13, 2019 TESEQ Preamplifier Agilent 8447D 2944A10738 Aug. 21, 2018 Aug. 20, 2019 (Below 1GHz) Preamplifier KEYSIGHT 83017A MY53270295 Jul. 02, 2018 Jul. 01, 2019 (Above 1GHz) RF signal cable WOKEN 8D-FB Cable-CH3-01 Aug. 21, 2018 Aug. 20, 2019 RF signal cable SUCOFLEX 104 Cable-CH3-03 (223653/4) Aug. 21, 2018 Aug. 20, 2019 HUBER+SUHNER RF signal cable SUCOFLEX Cable-CH3-03 HUBER+SUHNER& 104&EMC104-SM-S Aug. 21, 2018 Aug. 20, 2019 (309224+170907) EMCI M-8000 Software ADT_Radiated_ NA NA NA BV ADT V7.6.15.9.5 Antenna Tower MA 4000 013303 NA NA inn-co GmbH Antenna Tower Controller AT100 AT93021702 NA NA BV ADT Turn Table TT100 TT93021702 NA NA BV ADT Turn Table Controller SC100 SC93021702 NA NA BV ADT Boresight Antenna Fixture FBA-01 FBA-SIP01 NA NA Pre-amplifier (18GHz-40GHz) EMC184045B 980175 Nov. 14, 2018 Nov. 13, 2019 EMC USB Wideband Power MY55050005/MY5519000 Sensor U2021XA 4/MY55190007/MY55210 Jul. 17, 2018 Jul. 16, 2019 KEYSIGHT 005 Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in HwaYa Chamber 3. 3. The horn antenna and preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. Report No.: RF190507C02-3 Page No. 11 / 21 Report Format Version: 6.1.1

4.1.3 Test Procedures For Radiated emission below 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter chamber room. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. Parallel, perpendicular, and ground-parallel orientations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Quasi-Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 9kHz at frequency below 30MHz. For Radiated emission above 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters (for 30MHz ~ 1GHz) / 1.5 meters (for above 1GHz) above the ground at 3 meter chamber room for test. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Peak detection (PK) at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is ≥ 1/T (Duty cycle < 98%) or 10Hz (Duty cycle ≥ 98%) for Average detection (AV) at frequency above 1GHz. 4. All modes of operation were investigated and the worst-case emissions are reported. 4.1.4 Deviation from Test Standard No deviation. Report No.: RF190507C02-3 Page No. 12 / 21 Report Format Version: 6.1.1

4.1.5 Test Setup For Radiated emission below 30MHz 1m EUT& 3m Support Units Turn Table 80cm Ground Plane Test Receiver For Radiated emission 30MHz to 1GHz Ant. Tower 1-4m Variable 3m 10m EUT& Support Units Turn Table 80cm Ground Plane Test Receiver Report No.: RF190507C02-3 Page No. 13 / 21 Report Format Version: 6.1.1

For Radiated emission above 1GHz Ant. Tower 1-4m Variable EUT& 3m Support Units Turn Table Absorber 150cm Ground Plane Test Receiver For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.1.6 EUT Operating Conditions a. Set the EUT under transmission condition continuously at specific channel frequency. Report No.: RF190507C02-3 Page No. 14 / 21 Report Format Version: 6.1.1

4.1.7 Test Results Above 1GHz data: 8DPSK CHANNEL TX Channel 78 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 *2480.00 101.1 PK 1.54 H 63 69.3 31.8 2 *2480.00 97.2 AV 1.54 H 63 65.4 31.8 3 2483.50 60.5 PK 74.0 -13.5 1.43 H 71 28.7 31.8 4 2483.50 47.4 AV 54.0 -6.6 1.43 H 71 15.6 31.8 5 4960.00 48.5 PK 74.0 -25.5 1.37 H 57 44.7 3.8 6 4960.00 35.1 AV 54.0 -18.9 1.37 H 57 31.3 3.8 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 *2480.00 94.1 PK 3.52 V 187 62.3 31.8 2 *2480.00 90.1 AV 3.52 V 187 58.3 31.8 3 2483.50 60.2 PK 74.0 -13.8 3.44 V 200 28.4 31.8 4 2483.50 47.1 AV 54.0 -6.9 3.44 V 200 15.3 31.8 5 4960.00 47.2 PK 74.0 -26.8 1.79 V 264 43.4 3.8 6 4960.00 34.2 AV 54.0 -19.8 1.79 V 264 30.4 3.8 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency Report No.: RF190507C02-3 Page No. 15 / 21 Report Format Version: 6.1.1

Below 1GHz worst-case data: 8DPSK CHANNEL TX Channel 78 DETECTOR Quasi-Peak (QP) FREQUENCY RANGE 9kHz ~ 1GHz FUNCTION ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 30.97 32.6 QP 40.0 -7.4 1.00 H 1 44.0 -11.4 2 729.37 39.1 QP 46.0 -6.9 1.49 H 15 39.1 0.0 3 746.83 37.7 QP 46.0 -8.3 1.00 H 251 37.0 0.7 4 898.15 33.1 QP 46.0 -12.9 1.49 H 15 30.2 2.9 5 919.49 34.1 QP 46.0 -11.9 1.49 H 90 30.4 3.7 6 958.29 33.9 QP 46.0 -12.1 1.49 H 15 29.5 4.4 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit of frequency range 30MHz ~ 1000MHz 4. Margin value = Emission Level – Limit value 5. The emission levels were very low against the limit of frequency range 9kHz ~ 30MHz: the amplitude of spurious emissions attenuated more than 20 dB below the permissible value to be report Report No.: RF190507C02-3 Page No. 16 / 21 Report Format Version: 6.1.1

CHANNEL TX Channel 78 DETECTOR Quasi-Peak (QP) FREQUENCY RANGE 9kHz ~ 1GHz FUNCTION ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 30.00 32.4 QP 40.0 -7.6 1.00 V 113 43.6 -11.2 2 66.86 30.8 QP 40.0 -9.2 1.00 V 330 41.8 -11.0 3 833.16 33.2 QP 46.0 -12.8 1.50 V 260 31.0 2.2 4 860.32 32.2 QP 46.0 -13.8 1.00 V 87 29.6 2.6 5 877.78 32.6 QP 46.0 -13.4 1.50 V 18 30.0 2.6 6 922.40 33.3 QP 46.0 -12.7 1.00 V 43 29.5 3.8 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit of frequency range 30MHz ~ 1000MHz 4. Margin value = Emission Level – Limit value 5. The emission levels were very low against the limit of frequency range 9kHz ~ 30MHz: the amplitude of spurious emissions attenuated more than 20 dB below the permissible value to be report Report No.: RF190507C02-3 Page No. 17 / 21 Report Format Version: 6.1.1

4.2 Maximum Output Power 4.2.1 Limits of Maximum Output Power Measurement The Maximum Output Power Measurement is 125mW. 4.2.2 Test Setup Power Meter EUT (Including Attenuator Power Sensor) 4.2.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.2.4 Test Procedure For Peak Power A peak power sensor was used on the output port of the EUT. A power meter was used to read the response of the peak power sensor. Record the power level. For Average Power Average power sensor was used to perform output power measurement, trigger and gating function of wide band power meter is enabled to measure max output power of TX on burst. Duty factor is not added to measured value. 4.2.5 Deviation fromTest Standard No deviation. 4.2.6 EUT Operating Condition The software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel frequencies individually. Report No.: RF190507C02-3 Page No. 18 / 21 Report Format Version: 6.1.1

4.2.7 Test Results For Peak Power Output Power Output Power Frequency (mW) (dBm) Power Channel Pass / Fail (MHz) Limit (mW) GFSK 8DPSK GFSK 8DPSK 0 2402 6.871 16.069 8.37 12.06 125.00 Pass 39 2441 14.555 13.583 11.63 11.33 125.00 Pass 78 2480 8.872 17.742 9.48 12.49 125.00 Pass For Average Power Frequency Output Power (mW) Output Power (dBm) Channel (MHz) GFSK 8DPSK GFSK 8DPSK 0 2402 6.637 8.610 8.22 9.35 39 2441 14.125 8.147 11.50 9.11 78 2480 8.511 12.023 9.30 10.80 Report No.: RF190507C02-3 Page No. 19 / 21 Report Format Version: 6.1.1

5 Pictures of Test Arrangements Please refer to the attached file (Test Setup Photo). Report No.: RF190507C02-3 Page No. 20 / 21 Report Format Version: 6.1.1

Appendix – Information of the Testing Laboratories We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are FCC recognized accredited test firms and accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Lin Kou EMC/RF Lab Hsin Chu EMC/RF/Telecom Lab Tel: 886-2-26052180 Tel: 886-3-6668565 Fax: 886-2-26051924 Fax: 886-3-6668323 Hwa Ya EMC/RF/Safety Lab Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. --- END --- Report No.: RF190507C02-3 Page No. 21 / 21 Report Format Version: 6.1.1


Document Created: 2019-06-17 13:21:44
Document Modified: 2019-06-17 13:21:44
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC