Declaration of DFS Client

FCC ID: MSQI01WD

Cover Letter(s)

Download: PDF
FCCID_4226327

f—i E_ 4F, No. 150, Li—Te Rd., Peitou, Taipei, Taiwan 112 Date: March 4, 2019 DTS—UNII Device Declaration Letter To whom it may concern, We have declared below featured for FCC equipment authorization, Device FCC ID: MSQIO1IWD (1) DFS Device —— [_] Master [_] Client with Radar detection capability , [] Client without radar detection capability [_] N/A (2) Active / Passive Scanning , ad—hoc mode access point capability Frequency Band Active Scanning passive scanning Ad Hoc Mode or Access point (MHz) (the device can (where the device WIFI Direct capability transmit a probe is can listen only capability (beacon)) with no probes) 5150—5250 [X] Yes , l:] No [_] Yes , No [X] Yes . _|] No [X] Yes , [_] No 5250—5350 [ |]Yes. No [X Yes, [ ]JNo ]Yes. K No _]Yes , [XK] No 5470—5725 |_] Yes , [X No Yes , [_] No [_] Yes . [X No |_] Yes . [X No 5725—5850 [] Yes,.[ ]JNo [_]Yes, KMNo K Yes.[ ]JNo [¥ Yes , ]No (3) Country code selection ability — [_] Yes , [X No If yes, please explain how it was implemented: (please also help to provide detail of options for each country selection) (4) Meet 15.202 requirement — [<] Yes, [_] No, Please check below: [_]A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices [XA client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network.

E?. 4F, No. 150, Li—Te Rd., Peitou, Taipei, Taiwan 112 (5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non—DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes cannot be modified by end user or an installer. [_] Apply, [X No Apply, (If apply, please help to provide explanation on it was implement, and how software was controlled) a¢kson Yen Associate Vice President USTeK Computer Inc +886—2+28943447 Fa : +886—2—28987364 E—mail: jackson_yen@asus.com


Document Created: 2019-04-03 15:04:27
Document Modified: 2019-04-03 15:04:27
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC