User Manual

FCC ID: MSQA007A

Users Manual

Download: PDF
FCCID_3651195

Revised Edition/ July 2017 Side features Rear features Model: ASUS_A007 (ZB501KL) Audio jack Microphone Rear camera Camera flash Before you start, ensure that you have read all the safety information and operating instructions in this User Guide Nano SIM1, to prevent injury or damage to your device. Nano SIM2 Volume key / MicroSD Rear cover combo card NOTE: For the latest updates and more detailed slot information, please visit www.asus.com. Power key Front features User Guide LED indicator Camera Flash Proximity sensor and light sensor Front camera Receiver Charging your ASUS Phone Speaker Microphone To charge your ASUS Phone: 1. Connect the USB connector into the power adapter’s USB port. Micro USB port Touch screen 2. Connect the other end of the micro USB cable display to your ASUS Phone. 3. Plug the power adapter into a wall socket. NOTES: • The Nano SIM card slots support LTE, 3 WCDMA and GSM/EDGE network bands. 2 • The microSD card slot supports microSD and microSDXC card formats. 1 Touch keys EXXXXX 2. Insert the Nano SIM or MicroSD card(s) into Federal Communications Commission RF Exposure Information (SAR) IMPORTANT! the card slot(s). • When using your ASUS Phone while it is Statement This device has been tested and meets applicable limits plugged to a power outlet, the grounded power outlet must be near to the unit and for Radio Frequency (RF) exposure. This device complies with part 15 of the FCC Rules. easily accessible. Specific Absorption Rate (SAR) refers to the rate at which Operation is subject to the following two conditions: (1) • When charging your ASUS Phone through This device may not cause harmful interference, and the body absorbs RF energy. SAR limits are 1.6 Watts your computer, ensure that you plug the USB (2) this device must accept any interference received, per kilogram (over a volume containing a mass of 1 gram cable to your computer’s USB 2.0 port. of tissue) in countries that follow the United States FCC including interference that may cause undesired operation. • Avoid charging your ASUS Phone in an Nano SIM limit and 2.0 W/kg (averaged over 10 grams of tissue) in environment with ambient temperature of Changes or modifications not expressly approved by the countries that follow the Council of the European Union above 35oC (95oF). Micro SD party responsible for compliance could void the user‘s limit. authority to operate the equipment. Tests for SAR are conducted using standard operating NOTES: The antenna(s) used for this transmitter must not be co- positions with the device transmitting at its highest • For safety purposes, use ONLY the bundled located or operated in conjunction with any other antenna power adapter and cable to avoid damaging certified power level in all tested frequency bands. or transmitter. To reduce exposure to RF energy, use a hands-free your device and prevent the risk of injury. IMPORTANT: You can only use the Nano SIM2 • For safety purposes, use ONLY the bundled card or the MicroSD card at a time. This equipment has been tested and found to comply accessory or other similar option to keep this device from power adapter and cable to charge your with the limits for a Class B digital device, pursuant to your head and body. Carry this device at least 10 mm ASUS Phone. part 15 of the FCC Rules. These limits are designed to away from your body to ensure exposure levels remain • The input voltage range between the wall 3. Push the tray to close it provide reasonable protection against harmful interference at or below the as-tested levels. Choose the belt clips, outlet and this adapter is AC 100V - 240V. in a residential installation. This equipment generates, holsters, or other similar body-worn accessories which do The output voltage of the micro USB cable is uses and can radiate radio frequency energy and, if not not contain metallic components to support operation in +5.2V 1A, 5.2W. installed and used in accordance with the instructions, this manner. Cases with metal parts may change the RF may cause harmful interference to radio communications. performance of the device, including its compliance with However, there is no guarantee that interference will not RF exposure guidelines, in a manner that has not been Installing a Nano SIM /MicroSD card occur in a particular installation. If this equipment does tested or certified, and use such accessories should be cause harmful interference to radio or television reception, avoided. To install a Nano SIM / MicroSD card: which can be determined by turning the equipment The highest FCC SAR value for the device are as follows: off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • 1.06 W/kg @1g(Head) IMPORTANT: When two SIM cards are inserted, only one SIM card slot supports 4G/3G/2G service. • Reorient or relocate the receiving antenna. • 1.19 W/kg @1g(Body) 1. Push a pin into the hole on the Nano SIM / The other SIM card slot only supports 2G service. MicroSD card tray to eject it. • Increase the separation between the equipment and The FCC has granted an Equipment Authorization for this receiver. device with all reported SAR levels evaluated as in CAUTION! compliance with the FCC RF exposure guidelines. • Connect the equipment into an outlet on a circuit SAR information on this device is on file with the • Do not use sharp tools or solvent on your different from that to which the receiver is connected. device to avoid scratches on it. FCC and can be found under the Display Grant • Use only a standard Nano SIM card on your • Consult the dealer or an experienced radio/TV section of www.fcc.gov/oet/ea/fccid after searching ASUS Phone. technician for help. on FCC ID: MSQA007A. The country code selection is for non-US models only and is not available to all US models. Per FCC regulation, all WiFi products that are marketed in US must be fixed to US-operated channels only.

EU Radio Equipment Directive Items Maximum Radio-Frequency Output Power Table CE Marking For France, headphones/earphones for this LTE Band I (1920~1980; 23.91 (dBm) device are compliant with the sound pressure level Compliance 2110~2170 MHz) requirement laid down in the applicable EN 50332- LTE Band III (1710~1785; 23.98 (dBm) 1:2013 and/or EN50332-2:2013 standard required Simplified EU Declaration of Conformity 1805~1880 MHz) by French Article L.5232-1. Hereby, ASUSTek Computer Inc. declares that the LTE Band VII (2500~2570; 21.76 (dBm) Using GPS (Global Positioning radio equipment ASUS_A007 is in compliance with 2620~2690 MHz) Safety information Directive 2014/53/EU. Full text of EU declaration LTE Band VIII (880~915; 927~960 23.86 (dBm) System) on your ASUS Phone of conformity is available at https://www.asus.com/ LTE MHz) support/. (Search for ZB501KL) LTE Band XX (832~862; 791~821 23.81 (dBm) To use the GPS positioning feature on your ASUS ASUS Phone care MHz) Phone: • Use your ASUS Phone in an environment with RF Output Table LTE Band XXVIII (703~748 ; 23.54 (dBm) • Ensure that your device is connected to the ambient temperatures between 0 °C (32 °F) and 758~803 MHz) Internet before using Google Map or any 35 °C (95 °F). Items Maximum Radio-Frequency Output Power Table LTE Band XXXVIII (2570~2620 23.56 (dBm) GPS-enabled apps. Bluetooth RF (2400~2483.5 MHz) 10.31 (dBm) MHz) • For first-time use of a GPS-enabled app on The battery LTE Band XL (2300~2400 MHz) 23.3 (dBm) Bluetooth Bluetooth 4.0-LE (2400~2483.5 1.19 (dBm) your device, ensure that you are outdoors to Your ASUS Phone is equipped with a high MHz) get the best positioning data. performance non-detachable Li-polymer battery. RF Exposure Information 2.4GHz 802.11b (2400~2483.5 15.33 (dBm) • When using a GPS-enabled app on Observe the maintenance guidelines for a longer MHz) This ASUS product has been tested and meets your device inside a vehicle, the metallic battery life. 2.4GHz 802.11g (2400~2483.5 13.41 (dBm) applicable European SAR limits. The SAR limit is component of the car window and other • Do not remove the non-detachable Li-polymer MHz) 2.0 W/kg in countries (1.6W/kg in India) that set the electronic devices might affect the GPS battery as this will void the warranty. 2.4GHz 802.11n HT20 12.41 (dBm) limit averaged over 10 grams of tissue. The specific performance. (2400~2483.5 MHz) maximum SAR values for this device are as follows: • Avoid charging in extremely high or low 5GHz 802.11a (5150~5250; N/A (dBm) temperature. The battery performs optimally in WLAN 5250~5350; 5470~5725 MHz) ASUS_A007(ZB501KL) Prevention of Hearing Loss an ambient temperature of +5 °C to +35 °C. 5GHz 802.11an HT20 (5150~5250; N/A (dBm) • Head: 0.51 W/Kg • Do not remove and replace the battery with a To prevent possible hearing damage, do not listen 5250~5350; 5470~5725 MHz) • Body: 1.58 W/Kg at high volume levels for long periods. non-approved battery. 5GHz 802.11an HT40 (5150~5250; N/A (dBm) • Do not remove and soak the battery in water or 5250~5350; 5470~5725 MHz) ASUS_A007(ZB501KL) for IN/ID/TH any other liquid. 5GHz 802.11ac HT80 (5150~5250; N/A (dBm) 5250~5350; 5470~5725 MHz) • Never try to open the battery as it contains • Max: 0.98 W/Kg GSM 900 Burst (880~915; 925~960 33.24 (dBm) substances that might be harmful if swallowed MHz) or allowed to come into contact with unprotected GSM ASUS_A007(ZB501KL) for JP skin. GSM 1800 Burst (1710~1785 ; 30.6 (dBm) 1805~1880 MHz) • Head: 0.576 W/Kg • Do not remove and short-circuit the battery, as WCDMA Band I (1920~1980 ; 23.31 (dBm) it may overheat and cause a fire. Keep it away 2110~2170 MHz) • Body: 1.34 W/Kg from jewelry or metal objects. WCDMA When carrying this device or using it while worn on WCDMA Band VIII (880~915 ; 23.41 (dBm) • Do not remove and dispose of the battery in fire. 927~960 MHz) the body, either use an approved accessory such It could explode and release harmful substances as a holster or otherwise maintain a distance of 0.5 into the environment. cm from the body to ensure compliance with RF exposure requirements. • Do not remove and dispose of the battery with Operator access with a tool Proper disposal ASUS your regular household waste. Take it to a If a TOOL is necessary to gain access to an Address: 4F, No.150 Li-Te Rd., Peitou, Taipei, hazardous material collection point. Risk of explosion if battery is OPERATOR ACCESS AREA, either all other Taiwan • Do not touch the battery terminals. replaced by an incorrect type. compartments within that area containing a hazard Dispose of used batteries Tel: 886228943447 shall be inaccessible to the OPERATOR by the use according to the instructions. Fax: 886228907698 NOTES: of the same TOOL, or such compartments shall be marked to discourage OPERATOR access. DO NOT throw the battery in Declaration • Risk of explosion if battery is replaced by an municipal waste. The symbol of the incorrect type. We declare that the IMEI codes for this product, ASUS • Dispose of used battery according to the ASUS Recycling/Takeback crossed out wheeled bin indicates Phone, are unique to each unit and only assigned to that the battery should not be placed instructions. Services in municipal waste. this model. The IMEI of each unit is factory set and cannot be altered by the user and that it complies The charger DO NOT throw this product in with the relevant IMEI integrity related requirements ASUS recycling and takeback programs come municipal waste. This product has expressed in the GSM standards. from our commitment to the highest standards for • Use only the charger supplied with your ASUS protecting our environment. We believe in providing been designed to enable proper Should you have any questions or comments regarding Phone. solutions for you to be able to responsibly recycle reuse of parts and recycling. The this matter, please contact us. • Never pull the charger cord to disconnect it our products, batteries, other components as well symbol of the crossed out wheeled as the packaging materials. Please go to http:// bin indicates that the product Sincerely yours, from the power socket. Pull the charger itself. csr.asus.com/english/Takeback.htm for detailed (electrical, electronic equipment ASUSTeK COMPUTER INC. recycling information in different regions. and mercury-containing button Tel: 886228943447 Caution cell battery) should not be placed Fax: 886228907698 India E-waste (Management) Rules in municipal waste. Check local Your ASUS Phone is a high quality piece of regulations for disposal of electronic Support: http://vip.asus.com/eservice/techserv.aspx equipment. Before operating, read all instructions 2016 products. and cautionary markings on the (1) AC Adapter. Copyright © 2017 ASUSTeK COMPUTER INC. This product complies with the “India E-Waste DO NOT throw this product in fire. • Do not use the ASUS Phone in an extreme All Rights Reserved. (Management) Rules, 2016” and prohibits DO NOT short circuit the contacts. environment where high temperature or high use of lead, mercury, hexavalent chromium, You acknowledge that all rights of this Manual remain with ASUS. humidity exists. The ASUS Phone performs DO NOT disassemble this product. Any and all rights, including without limitation, in the Manual or polybrominated biphenyls (PBBs) and website, and shall remain the exclusive property of ASUS and/or its optimally in an ambient temperature between 0 polybrominated diphenyl ethers (PBDEs) in licensors. Nothing in this Manual intends to transfer any such rights, °C (32 °F) and 35 °C (95 °F). concentrations exceeding 0.1% by weight in or to vest any such rights to you. • Do not disassemble the ASUS Phone or its homogenous materials and 0.01 % by weight in ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY accessories. If service or repair is required, homogenous materials for cadmium, except for the OF ANY KIND. SPECIFICATIONS AND INFORMATION exemptions listed in Schedule II of the Rule. CONTAINED IN THIS MANUAL ARE FURNISHED FOR return the unit to an authorized service center. INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE If the unit is disassembled, a risk of electric AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE shock or fire may result. CONSTRUED AS A COMMITMENT BY ASUS. ZenTalk Fans Forum • Do not short-circuit the battery terminals with (http://www.asus.com/zentalk/global_forward.php) metal items.


Document Created: 2017-11-21 10:25:09
Document Modified: 2017-11-21 10:25:09
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC