DFS Description letter

FCC ID: MSQ9560D2

Cover Letter(s)

Download: PDF
FCCID_4104269

ASUSTeK Computer Inc 4F, No. 150, Li—Te Rd., Peitou, Taipei 112, Talwan Date: Nov. 23, 2018 DTS—UNII Device Declaration Letter To whom it may concern: We have declared below featured for FCC equipment authorization, Device FCC ID: MSQS560D2 (1) DFS Device —— [~] Master , ] Client with Radar detection capability , [] Client without radar detection capability, [_] N/A (2) Active / Passive Scanning , adhoc mode access point capability Frequency Band Active Scanning passive scanning Ad Hoc Mode or Access point _ Fe(MHz) (the device can transmit (where the device is can WIFI Direct capability a probe (beacon}) fisten only with no capability 600. C probes) 2412~2472 [_] Yes , I4] No [] Yes , [_J No [ Yes , J No [_] Yes , [ No 5150~5250 [_] Yes , No [E Yes , J No [_] Yes , [ No 1 Yes , 4 No 5250~5350 [{] Yes , 4 No E4 Yes , L_J No L1 Yes , No L_] Yes , [X] No 5470~5725 [_] Yes , 4 No Yes , ] No [] Yes , No L.] Yes , [] No 5725~5850 [_] Yes , 4 No [E] Yes , [A No [ Yes , No [A Yes , [<] No (3) Country code selection ability — [_] Yes , No If yes, pis explain how it was implemented: (pls also help to provide detail of options for each country selection} (4) Meet 15.202 requirement — [X] Yes , [{] No , pis check below : ["JA master device is defined as a device operating in a modein which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices MA client device is defined as a device operating in a mode in which the transmissions ofthe device are undercontrol of the master. A device in client mode is not able to initiate a network, (6) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bartds (devices with multiple equipmentclasses or those that operate on non—DFS frequencies) or modular devices which configure the modesof operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that properoperations modes can not be modified by end user or an installer. [_lApply , E4J No Apply , (if apply , pis help to provide explanation on it was implement , and how software was controlled) Signature: Name / Title: Jagkson Yen/Assbciate Vice President Phone: +886—4—28943447 Fax: +886—2—28087364 Email: jackson_yen@asus.com Address: 4F, No. 150, Li=Te Rd., Peitou, Taipel 112, Talwan


Document Created: 2019-10-08 21:51:06
Document Modified: 2019-10-08 21:51:06
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC