RF Test Report BT2.0

FCC ID: MSQ-RTACBX00

RF Exposure Info

Download: PDF
FCCID_3434026

Report No. 1730116R-RF-US-Exp RF Exposure Evaluation Declaration Product Name ： Lyra Trade Name ： ASUS Model No. ： MAP-AC2200 FCC ID. ： MSQ-RTACBX00 Applicant : ASUSTeK COMPUTER INC. Address : 4F, No. 150, Li-Te Rd., Peitou, Taipei, Taiwan Date of Receipt : Mar. 06, 2017 Date of Declaration : May 10, 2017 Report No. : 1730116R-RF-US-Exp Report Version : V1.0 The declaration results relate only to the samples calculated. The declaration shall not be reproduced except in full without the written approval of DEKRA Testing and Certification Co., Ltd. Page: 1 of 4

Report No. 1730116R-RF-US-Exp 1. RF Exposure Evaluation 1.1. Limits According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range Electric Field Magnetic Field Power Density Average Time 2 (MHz) Strength (V/m) Strength (A/m) (mW/cm ) (Minutes) (A) Limits for Occupational/ Control Exposures 300-1500 -- -- F/300 6 1500-100,000 -- -- 5 6 (B) Limits for General Population/ Uncontrolled Exposures 300-1500 -- -- F/1500 6 1500-100,000 -- -- 1 30 F= Frequency in MHz Friis Formula Friis transmission formula: Pd = (Pout*G)/(4*pi*r2) Where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. 1.2. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. The temperature and related humidity: 18℃and 78％ RH. Page: 2 of 4

Report No. 1730116R-RF-US-Exp 1.3. Test Result of RF Exposure Evaluation Product Lyra Test Mode Transmit Test Condition RF Exposure Evaluation Antenna Gain Antenna Gain: The maximum Gain measured in fully anechoic chamber is 0.92dBi or 1.24 in linear scale. Output Power into Antenna & RF Exposure Evaluation Distance: GFSK Bluetooth Function Channel Frequency Output Power to Antenna Power Density at R = 20 cm Channel (MHz) (mW) (mW/cm2) 00 2402 8.7498 0.00216 39 2441 11.4551 0.00283 78 2480 13.5519 0.00334 π/4 DQPSK Bluetooth Function Channel Frequency Output Power to Antenna Power Density at R = 20 cm Channel (MHz) (mW) (mW/cm2) 00 2402 14.8594 0.00367 39 2441 18.9671 0.00468 78 2480 22.3357 0.00551 The power density Pd (4th column) at a distance of 20 cm calculated from the Friis transmission formula is far below the limit of 1 mW/cm2. Page: 3 of 4

Report No. 1730116R-RF-US-Exp Product Lyra Test Mode Transmit Test Condition RF Exposure Evaluation Antenna Gain Antenna Gain: The maximum Gain measured in fully anechoic chamber is 0.92dBi or 1.24 in linear scale. Output Power into Antenna & RF Exposure Evaluation Distance: 8DQPSK Bluetooth Function Channel Frequency Output Power to Antenna Power Density at R = 20 cm Channel (MHz) (mW) (mW/cm2) 00 2402 16.4437 0.00406 39 2441 21.0863 0.00520 78 2480 24.2661 0.00599 The power density Pd (4th column) at a distance of 20 cm calculated from the Friis transmission formula is far below the limit of 1 mW/cm2. Page: 4 of 4


Document Created: 2017-06-13 18:28:18
Document Modified: 2017-06-13 18:28:18
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC