RF Exposure

FCC ID: MSQ-RTACBX00

RF Exposure Info

Download: PDF
FCCID_3433976

Report No：1730116R-RF-US-Exp RF Exposure Evaluation Declaration Product Name ： Lyra Trade Name ： ASUS Model No. ： MAP-AC2200 FCC ID. ： MSQ-RTACBX00 Applicant : ASUSTeK COMPUTER INC. Address : 4F, No. 150, Li-Te Rd., Peitou, Taipei, Taiwan Date of Receipt : Mar. 06, 2017 Issued Date : May 10, 2017 Report No. : 1730116R-RF-US-Exp Report Version : V1.0 The declaration results relate only to the samples calculated. The declaration shall not be reproduced except in full without the written approval of DEKRA Testing and Certification Co., Ltd. Page: 1 of 14

Report No：1730116R-RF-US-Exp 1. RF Exposure Evaluation 1.1. Limits According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range Electric Field Magnetic Field Power Density Average Time (MHz) Strength (V/m) Strength (A/m) (mW/cm2) (Minutes) (A) Limits for Occupational/ Control Exposures 300-1500 -- -- F/300 6 1500-100,000 -- -- 5 6 (B) Limits for General Population/ Uncontrolled Exposures 300-1500 -- -- F/1500 6 1500-100,000 -- -- 1 30 F= Frequency in MHz Friis Formula Friis transmission formula: Pd = (Pout*G)/(4*pi*r2) Where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. 1.2. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. The temperature and related humidity: 18℃and 78％ RH. Page: 2 of 14

Report No：1730116R-RF-US-Exp 1.3. Test Result of RF Exposure Evaluation Product Lyra Test Mode Transmit Test Condition RF Exposure Evaluation Antenna Gain Antenna Gain: The maximum Gain measured in fully anechoic chamber is 0.92dBi or 1.24 in linear scale. Output Power into Antenna & RF Exposure Evaluation Distance: BT 2.0-GFSK Bluetooth Function Channel Frequency Output Power to Antenna Power Density at R = 20 cm Channel (MHz) (mW) (mW/cm2) 00 2402 8.7498 0.00216 39 2441 11.4551 0.00283 78 2480 13.5519 0.00334 BT 2.0-π/4 DQPSK Bluetooth Function Channel Frequency Output Power to Antenna Power Density at R = 20 cm Channel (MHz) (mW) (mW/cm2) 00 2402 14.8594 0.00367 39 2441 18.9671 0.00468 78 2480 22.3357 0.00551 The power density Pd (4th column) at a distance of 20 cm calculated from the Friis transmission formula is far below the limit of 1 mW/cm2. Page: 3 of 14

Report No：1730116R-RF-US-Exp Product Lyra Test Mode Transmit Test Condition RF Exposure Evaluation Antenna Gain Antenna Gain: The maximum Gain measured in fully anechoic chamber is 0.92dBi or 1.24 in linear scale. Output Power into Antenna & RF Exposure Evaluation Distance: BT 2.0-8DQPSK Bluetooth Function Channel Frequency Output Power to Antenna Power Density at R = 20 cm Channel (MHz) (mW) (mW/cm2) 00 2402 16.4437 0.00406 39 2441 21.0863 0.00520 78 2480 24.2661 0.00599 The power density Pd (4th column) at a distance of 20 cm calculated from the Friis transmission formula is far below the limit of 1 mW/cm2. Page: 4 of 14

Report No：1730116R-RF-US-Exp Product Lyra Test Mode Transmit Test Condition RF Exposure Evaluation Antenna Gain Antenna Gain: The maximum Gain measured in fully anechoic chamber is 0.92 dBi or 1.24 in linear scale. Output Power into Antenna & RF Exposure Evaluation Distance: BT 4.0-GFSK Bluetooth Function Channel Frequency Output Power to Antenna Power Density at R = 20 cm Channel (MHz) (mW) (mW/cm2) 00 2402 1.8664 0.00046 19 2440 2.5410 0.00063 39 2480 3.1477 0.00078 The power density Pd (4th column) at a distance of 20 cm calculated from the Friis transmission formula is far below the limit of 1 mW/cm2. Page: 5 of 14

Report No：1730116R-RF-US-Exp Product Lyra Test Mode Transmit_CDD Mode Test Condition RF Exposure Evaluation Antenna Gain Antenna Gain: The maximum Gain measured in fully anechoic chamber are 2.16 dBi or 1.64in linear scale. Output Power into Antenna & RF Exposure Evaluation Distance: IEEE 802.11b (ANT 0+1) WLAN Function Channel Frequency Output Power to Antenna Power Density at R = 20 cm Channel (MHz) (mW) (mW/cm2) 1 2412 453.9416 0.14811 6 2437 751.6229 0.24523 11 2462 584.7901 0.19080 IEEE 802.11g (ANT 0+1) WLAN Function Channel Frequency Output Power to Antenna Power Density at R = 20 cm Channel (MHz) (mW) (mW/cm2) 1 2412 112.9796 0.03686 6 2437 610.9420 0.19933 11 2462 104.2317 0.03401 The power density Pd (4th column) at a distance of 20 cm calculated from the Friis transmission formula is far below the limit of 1 mW/cm2. Page: 6 of 14

Report No：1730116R-RF-US-Exp Product Lyra Test Mode Transmit_CDD Mode Test Condition RF Exposure Evaluation Antenna Gain Antenna Gain: The maximum Gain measured in fully anechoic chamber are 2.16 dBi or 1.64in linear scale. Output Power into Antenna & RF Exposure Evaluation Distance: IEEE 802.11n (20MHz) (ANT 0+1) WLAN Function Channel Frequency Output Power to Antenna Power Density at R = 20 cm Channel (MHz) (mW) (mW/cm2) 1 2412 114.0250 0.03720 6 2437 618.0164 0.20164 11 2462 119.3988 0.03896 The power density Pd (4th column) at a distance of 20 cm calculated from the Friis transmission formula is far below the limit of 1 mW/cm2. IEEE 802.11n (40MHz) (ANT 0+1) WLAN Function Channel Frequency Output Power to Antenna Power Density at R = 20 cm Channel (MHz) (mW) (mW/cm2) 3 2422 59.1562 0.01930 6 2437 125.0259 0.04079 9 2452 58.2103 0.01899 The power density Pd (4th column) at a distance of 20 cm calculated from the Friis transmission formula is far below the limit of 1 mW/cm2. Page: 7 of 14

Report No：1730116R-RF-US-Exp Product Lyra Test Mode Transmit_ Beamforming Mode Test Condition RF Exposure Evaluation Antenna Gain Antenna Gain: The maximum Gain measured in fully anechoic chamber are 2.16 dBi or 1.64in linear scale. Output Power into Antenna & RF Exposure Evaluation Distance: IEEE 802.11n (20MHz) (ANT 0+1) WLAN Function Channel Frequency Output Power to Antenna Power Density at R = 20 cm Channel (MHz) (mW) (mW/cm2) 1 2412 87.9023 0.02868 6 2437 529.6634 0.17281 11 2462 91.8333 0.02996 IEEE 802.11n (40MHz) (ANT 0+1) WLAN Function Channel Frequency Output Power to Antenna Power Density at R = 20 cm Channel (MHz) (mW) (mW/cm2) 3 2422 25.0611 0.00818 6 2437 53.8270 0.01756 9 2452 26.2422 0.00856 The power density Pd (4th column) at a distance of 20 cm calculated from the Friis transmission formula is far below the limit of 1 mW/cm2. Page: 8 of 14

Report No：1730116R-RF-US-Exp Product Lyra Test Mode Transmit _ CDD Mode Test Condition RF Exposure Evaluation Antenna Gain Antenna Gain: The maximum Gain measured in fully anechoic chamber are 4.31dBi or 2.70 in linear scale. Output Power into Antenna & RF Exposure Evaluation Distance: IEEE 802.11a WLAN Function Channel Frequency Output Power to Antenna Power Density at R = 20 cm Channel (MHz) (mW) (mW/cm2) 36 5180 82.1864 0.04415 44 5220 95.8517 0.05149 48 5240 65.1929 0.03502 IEEE 802.11 n(20MHz) WLAN Function Channel Frequency Output Power to Antenna Power Density at R = 20 cm Channel (MHz) (mW) (mW/cm2) 36 5180 66.0085 0.03546 44 5220 108.0687 0.05805 48 5240 63.8263 0.03428 The power density Pd (4th column) at a distance of 20 cm calculated from the Friis transmission formula is far below the limit of 1 mW/cm2. Page: 9 of 14

Report No：1730116R-RF-US-Exp Product Lyra Test Mode Transmit _ CDD Mode Test Condition RF Exposure Evaluation Antenna Gain Antenna Gain: The maximum Gain measured in fully anechoic chamber are 4.74dBi or 2.98 in linear scale. Output Power into Antenna & RF Exposure Evaluation Distance: IEEE 802.11 n(40MHz) WLAN Function Channel Frequency Output Power to Antenna Power Density at R = 20 cm Channel (MHz) (mW) (mW/cm2) 38 5190 30.6337 0.01645 46 5230 50.5941 0.02718 IEEE 802.11 ac(80MHz) WLAN Function Channel Frequency Output Power to Antenna Power Density at R = 20 cm Channel (MHz) (mW) (mW/cm2) 42 5210 16.4968 0.00886 The power density Pd (4th column) at a distance of 20 cm calculated from the Friis transmission formula is far below the limit of 1 mW/cm2. Page: 10 of 14

Report No：1730116R-RF-US-Exp Product Lyra Test Mode Transmit _ CDD Mode Test Condition RF Exposure Evaluation Antenna Gain Antenna Gain: The maximum Gain measured in fully anechoic chamber are 4.31dBi or 2.70 in linear scale. Output Power into Antenna & RF Exposure Evaluation Distance: IEEE 802.11a WLAN Function Channel Frequency Output Power to Antenna Power Density at R = 20 cm Channel (MHz) (mW) (mW/cm2) 149 5745 229.2979 0.12317 157 5785 287.4749 0.15442 165 5825 295.8012 0.15889 IEEE 802.11 n(20MHz) WLAN Function Channel Frequency Output Power to Antenna Power Density at R = 20 cm Channel (MHz) (mW) (mW/cm2) 149 5745 252.1158 0.13542 157 5785 283.2044 0.15212 165 5825 300.9539 0.16166 The power density Pd (4th column) at a distance of 20 cm calculated from the Friis transmission formula is far below the limit of 1 mW/cm2. Page: 11 of 14

Report No：1730116R-RF-US-Exp Product Lyra Test Mode Transmit _ CDD Mode Test Condition RF Exposure Evaluation Antenna Gain Antenna Gain: The maximum Gain measured in fully anechoic chamber are 4.31dBi or 2.70 in linear scale. Output Power into Antenna & RF Exposure Evaluation Distance: IEEE 802.11 n(40MHz) WLAN Function Channel Frequency Output Power to Antenna Power Density at R = 20 cm Channel (MHz) (mW) (mW/cm2) 151 5755 234.6929 0.12606 159 5795 318.3464 0.17100 IEEE 802.11 ac(80MHz) WLAN Function Channel Frequency Output Power to Antenna Power Density at R = 20 cm Channel (MHz) (mW) (mW/cm2) 155 5775 97.6338 0.05244 The power density Pd (4th column) at a distance of 20 cm calculated from the Friis transmission formula is far below the limit of 1 mW/cm2. Page: 12 of 14

Report No：1730116R-RF-US-Exp Product Lyra Test Mode Transmit _ Beamforming Mode Test Condition RF Exposure Evaluation Antenna Gain Antenna Gain: The maximum Gain measured in fully anechoic chamber are 4.74dBi or 2.98 in linear scale. Output Power into Antenna & RF Exposure Evaluation Distance: IEEE 802.11 n(20MHz) WLAN Function Channel Frequency Output Power to Antenna Power Density at R = 20 cm Channel (MHz) (mW) (mW/cm2) 36 5180 66.0085 0.03546 44 5220 108.0687 0.05805 48 5240 63.8263 0.03428 IEEE 802.11 n(40MHz) WLAN Function Channel Frequency Output Power to Antenna Power Density at R = 20 cm Channel (MHz) (mW) (mW/cm2) 38 5190 26.4667 0.01422 46 5230 50.5941 0.02718 IEEE 802.11 ac(80MHz) WLAN Function Channel Frequency Output Power to Antenna Power Density at R = 20 cm Channel (MHz) (mW) (mW/cm2) 42 5210 12.5777 0.00676 The power density Pd (4th column) at a distance of 20 cm calculated from the Friis transmission formula is far below the limit of 1 mW/cm2. Page: 13 of 14

Report No：1730116R-RF-US-Exp Product Lyra Test Mode Transmit _ Beamforming Mode Test Condition RF Exposure Evaluation Antenna Gain Antenna Gain: The maximum Gain measured in fully anechoic chamber are 4.74dBi or 2.98 in linear scale. Output Power into Antenna & RF Exposure Evaluation Distance: IEEE 802.11 n(20MHz) WLAN Function Channel Frequency Output Power to Antenna Power Density at R = 20 cm Channel (MHz) (mW) (mW/cm2) 149 5745 252.1158 0.13542 157 5785 283.2044 0.15212 165 5825 300.9539 0.16166 IEEE 802.11 n(40MHz) WLAN Function Channel Frequency Output Power to Antenna Power Density at R = 20 cm Channel (MHz) (mW) (mW/cm2) 151 5755 234.6929 0.12606 159 5795 318.3464 0.17100 IEEE 802.11 ac(80MHz) WLAN Function Channel Frequency Output Power to Antenna Power Density at R = 20 cm Channel (MHz) (mW) (mW/cm2) 155 5775 45.1960 0.02428 The power density Pd (4th column) at a distance of 20 cm calculated from the Friis transmission formula is far below the limit of 1 mW/cm2. Page: 14 of 14


Document Created: 2017-06-19 15:41:25
Document Modified: 2017-06-19 15:41:25
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC