manual

FCC ID: MRXH4W

Users Manual

Download: PDF
FCCID_2093236

The device under test is manufactured by the grantee (Schrader Electronics) and sold as an
OEM product. Per 47 CFR 2.909, 2.927, 2.931, 2.1033, 15.15(b) etc…, the grantee must ensure
the end-user has all applicable / appropriate operating instructions. When end-user instructions
are required, as in the case of this product, the grantee must notify the OEM to notify the end-
user.

Schrader Electronics will supply this document to the reseller/distributor dictating what must
be included in the end user’s manual for the commercial product.

           INFORMATION TO BE INCLUDED IN THE END USER'S MANUAL

The following information (in blue) must be included in the end product user’s manual to
ensure continued FCC and Industry Canada regulatory compliance. The ID numbers must
be included in the manual if the device label is not readily accessible to the end user. The
compliance paragraphs below must be included in the user's manual.

******************************************************************************
                          FCC ID:MRXH4W IC: 2546A- H4W

This device complies with Part 15 of the FCC Rules and with Licence exempt RSS standards of
Industry Canada. Operation is subject to the following two conditions:
    (1) This device may not cause harmful interference, and
    (2) This device must accept any interference received, including interference that may cause
        undesired operation.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
    exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:
    (1) l'appareil ne doit pas produire de brouillage, et
    (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
    est susceptible d'en compromettre le fonctionnement.

WARNING: Changes or modifications not expressively approved by the party responsible for
compliance could void the user's authority to operate the equipment. The term “IC:” before the
radio certification number only signifies that Industry Canada technical specifications were met.

******************************************************************************



Document Created: 2013-09-13 11:15:03
Document Modified: 2013-09-13 11:15:03

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC