User manual

FCC ID: MRXCG64

Users Manual

Download: PDF
FCCID_3508344

                                                                                          Schrader Electronics Ltd
                                                                                          Unit 11 Technology Park
                                                                                          Belfast Road
                                                                                          Antrim, Northern Ireland, BT41 1QS




The device under test is manufactured by the grantee (Schrader Electronics) and sold as an OEM product.
Per 47 CFR 2.909, 2.927, 2.931, 2.1033, 15.15(b) etc…, the grantee must ensure the end-user has all
applicable / appropriate operating instructions. When end-user instructions are required, as in the case of
this product, the grantee must notify the OEM to notify the end-user.

Schrader Electronics will supply this document to the reseller/distributor dictating what must be included
in the end user’s manual for the commercial product.

Information to be included IN the end USER'S MANUAL

The following information (in blue) must be included in the end product user’s manual to ensure
continued FCC and Industry Canada regulatory compliance. The ID numbers must be included in
the manual if the device label is not readily accessible to the end user. The compliance paragraphs
below must be included in the user's manual.

******************************************************************************
                              FCC ID:MRXCG64 IC: 2546A- CG64

FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment.

This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the
following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the
    device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne
doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

IMPORTANT NOTE:
IC Radiation Exposure Statement:



                                http://www.tpmseuroshop.com/documents/declaration_conformities


                                                                                      Schrader Electronics Ltd
                                                                                      Unit 11 Technology Park
                                                                                      Belfast Road
                                                                                      Antrim, Northern Ireland, BT41 1QS




This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled
environment.

Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un
environnement non contrôlé.

******************************************************************************




                            http://www.tpmseuroshop.com/documents/declaration_conformities



Document Created: 2017-07-28 09:18:27
Document Modified: 2017-07-28 09:18:27

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC