Operational Description

FCC ID: MRXAG6SP3

Operational Description

Download: PDF
FCCID_2373857

Consumer Use Manufacturing & Mode of Operation Explanation Frequency of Transmission Modes Service Modes Forced Transmission eg LF On receipt of a particular LF sequence this Forced transmission allows the X Forced Transmission as required Learn interrogation of the sensor in the vehicle factory or dealership X Off Mode Part is in an off state, No transmissions, No exit by motion or pressure change No transmissions. Transmitter enters mode after Service Mode Timeout - Wheel is not rotating - X Stationary Mode No transmissions. Vehicle is stopped. Enters mode upon exiting Stationary mode. This mode is entered when the vehicle X Drive Mode starts moving and motion is detected by the sensor. Transmission rate every 60secs Transmitter in normal operation - wheel is rotating This mode is interim period of 30secs once the sensor has dropped below the X Drive Mode (service) minimum roll detection threshold. After the Service Period time has elapsed the No transmissions. TPMS transmitter will exit to STATIONARY Mode Pressure Measure Mode Pursuant to Section 15.231(a)(4), alarm conditions apply Alarm transmission as required


Document Created: 2014-08-23 02:20:41
Document Modified: 2014-08-23 02:20:41
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC