Description

FCC ID: MRXAG2SZ3

Operational Description

Download: PDF
FCCID_2164114

Consumer Use Manufacturing & Mode of Operation Explanation Frequency of Transmission Modes Service Modes Forced Transmission eg Tool On receipt of a particular LF sequence this Forced transmission allows the Forced Transmission as required X LF / Factory LF (dealer / plant) interrogation of the sensor in the vehicle factory or dealership 9ASK + 4FSK (duration <1sec) X Off Mode Part is in an off state, No transmissions, No exit by motion No transmissions LF activation window 1secs. Timed X Factory Mode (plant & test) Faster response mode used during testing at plant transmissions every 15secs if in motion. Transmitter enters mode after First 24/36 Block (PAL/BMT) Drive Mode or 1min Park mode (stationary transmission) every X Stationary Mode Drive Mode - Wheel is not rotating - Vehicle is stopped. 6hours. 9ASK + 4FSK in Stationary modes First 36 Block BMT (Drive Enters mode upon exiting Stationary mode for first 36 transmissions. This mode is Transmission rate every 15secs. 4 FSK X Mode Non PAL enabled a function to learn the sensor IDs to confirm wheel positions on vehicle. frames in Rolling Modes sensor) First 24 Block PAL (Drive Enters mode upon exiting Stationary mode for first 24 transmissions. This mode is Transmission rate typically 21.5secs (min X Mode PAL enabled sensor) a function to learn the sensor IDs to confirm wheel positions on vehicle. 15secs). 4 FSK in Rolling Modes Transmission rate every 60secs. 4 FSK in X Drive Mode Transmitter in normal operation - wheel is rotating Rolling Modes Pressure Measure Mode Pursuant to Section 15.231(a)(4), alarm conditions apply Alarm transmission as required


Document Created: 2014-01-09 17:58:56
Document Modified: 2014-01-09 17:58:56
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC