RF Exposure Info.pdf

FCC ID: MQT-XAPT103PU

RF Exposure Info

Download: PDF
FCCID_2108854

RF EXPOSURE REPORT REPORT NO.: SA130902E05 MODEL NO.: xAPT-103PU FCC ID: MQT-XAPT103PU RECEIVED: Sep. 02, 2013 TESTED: Sep. 24, 2013 ISSUED: Oct. 09, 2013 APPLICANT: XAC AUTOMATION CORP. ADDRESS: 4F, No. 30, INDUSTRY E. RD. IX, SCIENCE-BASED INDUSTRIAL PARK,HSINCHU,TAIWAN ISSUED BY : Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: SA130902E05 1 of 10 Report Format Version 5.0.0

TABLE OF CONTENTS RELEASE CONTROL RECORD ..................................................................................... 3 1 CERTIFICATION ...................................................................................................... 4 2 EVALUATION RESULT ............................................................................................ 5 3 SAR TEST EXCLUSION THRESHOLDS ................................................................. 6 3.1 SAR TEST EXCLUSION THRESHOLDS - RFID ...................................................... 6 3.2 SAR TEST EXCLUSION THRESHOLDS - GSM AND WCDMA............................... 8 Report No.: SA130902E05 2 of 10 Report Format Version 5.0.0

RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA130902E05 Original release Oct. 09, 2013 Report No.: SA130902E05 3 of 10 Report Format Version 5.0.0

1 CERTIFICATION PRODUCT: Terminal BRAND NAME: XAC MODEL NO.: xAPT-103PU TEST SAMPLE: ENGINEERING SAMPLE APPLICANT: XAC AUTOMATION CORP. TESTED DATE: Sep. 24, 2013 STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (Model: xAPT-103PU) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: Oct. 09, 2013 ( Claire Kuan, Specialist ) APPROVED BY : , DATE: Oct. 09, 2013 ( May Chen, Manager ) Report No.: SA130902E05 4 of 10 Report Format Version 5.0.0

2 EVALUATION RESULT Following FCC KDB 447498 D01 “General SAR test exclusion guidance” The corresponding SAR Exclusion Threshold condition, listed below: 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR where  f(GHz) is the RF channel transmit frequency in GHz  Power and distance are rounded to the nearest mW and mm before calculation  The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. 2) At 100 MHz to 6 GHz and for test separation distances > 50 mm, the SAR test exclusion threshold is determined according to the following: a) [Threshold at 50 mm in step 1) + (test separation distance - 50 mm)·( f(MHz)/150)] mW, at 100MHz to 1500 MHz b) [Threshold at 50 mm in step 1) + (test separation distance - 50 mm)·10] mW at > 1500 MHz and ≤ 6 GHz 3) At frequencies below 100 MHz, the following may be considered for SAR test exclusion. a) The threshold at the corresponding test separation distance at 100 MHz in step 2) is multiplied by [1 + log(100/f(MHz))] for test separation distances > 50 mm and < 200 mm. b) The threshold determined by the equation in a) for 50 mm and 100 MHz is multiplied by ½ for test separation distances ≤ 50 mm. c) SAR measurement procedures are not established below 100 MHz. When SAR test exclusion cannot be applied, a KDB inquiry is required to determine SAR evaluation requirements for any test results to be acceptable. Report No.: SA130902E05 5 of 10 Report Format Version 5.0.0

3 SAR TEST EXCLUSION THRESHOLDS 3.1 SAR TEST EXCLUSION THRESHOLDS - RFID Smallest distance from the antenna and radiating structures or outer surface of the device The minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. (See below figure) Report No.: SA130902E05 6 of 10 Report Format Version 5.0.0

Power table Frequency Electric field EIRP Mode (MHz) (dBuV/m) @3m (dBm) RFID 13.56 69.9 -25.3 Field strength is then converted to EIRP as follows: (i) EIRP = ((E*d)^2) / 30 where: E is the field strength in V/m; d is the measurement distance in meters; EIRP is the equivalent isotropically radiated power in watts. (ii) Working in dB units, the above equation is equivalent to: EIRP[dBm] = E[dBμV/m] + 20 log(d[meters]) - 104.77 (iii) Or, if d is 10 meters: EIRP[dBm] = E[dBμV/m] – 84.8 If d is 3meters: EIRP[dBm] = E[dBμV/m] – 95.2 SAR Test Exclusion Thresholds Min. test SAR test exclusion Frequency Max. Power separation power thresholds *2 Result (MHz) (mW)*1 distance (mm) (mW) 13.56 0.002951 ≤ 50 mm 593 Pass *1 Max. power obtained from maximum EIRP. *2 Calculate SAR test exclusion thresholds from “ 3) ” formulas. (base on 10-g extremity SAR exclusion thresholds) Conclusion Since maximum EIRP is below SAR test exclusion power thresholds, the SAR evaluation is not required. Report No.: SA130902E05 7 of 10 Report Format Version 5.0.0

3.2 SAR TEST EXCLUSION THRESHOLDS - GSM AND WCDMA Smallest distance from the antenna and radiating structures or outer surface of the device The minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. (See below figure) Report No.: SA130902E05 8 of 10 Report Format Version 5.0.0

Source-base time average power table GPRS Mode: Source-based time-averaged Frequency Conducted power Conducted power conducted output (MHz) (dBm) (mW) power (mW) 848.8 32.6 1819.7 455 1850.2 29 794.32 198.61 Note: Calculations for RF Exposure compliance in the cellular and PCS bands are base on the maximum source based time-average power obtained from 2-Slot GPRS operation. The resulting duty cycle factor is 2/8, or 6.02dB. SAR Test Exclusion Thresholds Min. test SAR test exclusion Max. Power Frequency separation power thresholds *2 Result (mW)*1 distance (mm) (mW) 848.8 455 80 576.74 Pass 1850.2 198.61 80 575.67 Pass 1 * Max. power obtained from maximum source based time average power. *2 Calculate SAR test exclusion thresholds from “ 1) & 2) ” formulas. (base on 10-g extremity SAR exclusion thresholds) Report No.: SA130902E05 9 of 10 Report Format Version 5.0.0

Conclusion Since Source-base time average power is below SAR test exclusion power thresholds, the SAR evaluation is not required. --- END --- Report No.: SA130902E05 10 of 10 Report Format Version 5.0.0


Document Created: 2019-07-08 02:01:14
Document Modified: 2019-07-08 02:01:14
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC