Test Report ELEC0001

FCC ID: MQEE51-0386-40

Test Report

Download: PDF
FCCID_1481860

Electronic Controls Design, Inc. SGM2 Report No. ELEC0001 Report Prepared By www.nwemc.com 1-888-EMI-CERT © 2011 Northwest EMC, Inc

22975 NW Evergreen Parkway Suite 400 Hillsboro, Oregon 97124 Certificate of Test Last Date of Test: May 25, 2011 Electronic Controls Design, Inc. Model: SMG2 Emissions Test Description Specification Test Method Pass/Fail Dwell Time FCC 15.247:2011 ANSI C63.10:2009 Pass Spurious Radiated Emissions FCC 15.247:2011 ANSI C63.10:2009 Pass Modifications made to the product See the Modifications section of this report Test Facility The measurement facility used to collect the data is located at: Northwest EMC, Inc. 22975 NW Evergreen Parkway, Suite 400 Hillsboro, OR 97124 Phone: (503) 844-4066 Fax: 844-3826 This site has been fully described in a report filed with and accepted by the FCC (Federal Communications Commission) and Industry Canada (Site filing #2834D-1). Approved By: Tim O'Shea, Operations Manager NVLAP Lab Code: 200630-0 This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government of the United States of America. Product compliance is the responsibility of the client, therefore the tests and equipment modes of operation represented in this report were agreed upon by the client, prior to testing. This Report may only be duplicated in its entirety. The results of this test pertain only to the sample(s) tested. The specific description is noted in each of the individual sections of the test report supporting this certificate of test. Report No. ELEC0001 2/21

Northwest Revision History EMC Revision 06/29/09 Revision Description Date Page Number Number 00 None Barometric Pressure The recorded barometric pressure has been normalized to sea level. Report No. ELEC0001 3/21

Accreditations and Authorizations FCC Accredited by NVLAP for performance of FCC radio, digital, and ISM device testing. Our Open Area Test Sites, certification chambers, and conducted measurement facilities have been fully described in reports filed with the FCC and accepted by the FCC in letters maintained in our files. Northwest EMC has been accredited by ANSI to ISO / IEC Guide 65 as a product certifier. We have been designated by the FCC as a Telecommunications Certification Body (TCB). This allows Northwest EMC to certify transmitters to FCC specifications in accordance with 47 CFR 2.960 and 2.962. NVLAP Northwest EMC, Inc. is accredited under the National Voluntary Laboratory Accreditation Program (NVLAP) for satisfactory compliance with the requirements of ISO/IEC 17025 for Testing Laboratories. NVLAP is administered by the National Institute of Standards and Technology (NIST), an agency of the U.S. Commerce Department. The NVLAP accreditation encompasses Electromagnetic Compatibility Testing in accordance with the European Union EMC Directive 2004/108/EC, and ANSI C63.4. Additionally, Northwest EMC is accredited by NVLAP to perform radio testing in accordance with the European Union R&TTE Directive 1999/5/EEC, the requirements of FCC, and the RSS radio standards for Industry Canada. Industry Canada Accredited by NVLAP for performance of Industry Canada RSS and ICES testing. Our Open Area Test Sites and certification chambers comply with RSS-Gen, Issue 2 and have been filed with Industry Canada and accepted. Northwest EMC has been accredited by ANSI to ISO / IEC Guide 65 as a product certifier. We have been designated by NIST and recognized by Industry Canada as a Certification Body (CB) per the APEC Mutual Recognition Arrangement (MRA). This allows Northwest EMC to certify transmitters to Industry Canada technical requirements. (Site Filing Numbers - Hillsboro: 2834D-1, 2834D-2, Sultan: 2834C-1, Irvine: 2834B-1, 2834B-2, Brooklyn Park: 2834E-1) CAB Designated by NIST and validated by the European Commission as a Conformity Assessment Body (CAB) to conduct tests and approve products to the EMC directive and transmitters to the R&TTE directive, as described in the U.S. - EU Mutual Recognition Agreement. Australia/New Zealand The National Association of Testing Authorities (NATA), Australia has been appointed by the ACA as an accreditation body to accredit test laboratories and competent bodies for EMC standards. Accredited test reports or assessments by competent bodies must carry the NATA logo. Test reports made by an overseas laboratory that has been accredited for the relevant standards by an overseas accreditation body that has a Mutual Recognition Agreement (MRA) with NATA are also accepted as technical grounds for product conformity. The report should be endorsed with the respective logo of the accreditation body (NVLAP). Report No. ELEC0001 4/21

Accreditations and Authorizations VCCI Accepted as an Associate Member to the VCCI, Acceptance No. 564. Conducted and radiated measurement facilities have been registered in accordance with Regulations for Voluntary Control Measures, Article 8. (Registration Numbers. - Hillsboro: C-1071, R-1025, G-84, C-2687, T- 1658, and R-2318, Irvine: R-1943, G-85, C-2766, and T-1659, Sultan: R-871, G-83, C-1784, and T-1511, Brooklyn Park: R-3125, G-86, G-141, C-3464, and T-1634). BSMI Northwest EMC has been designated by NIST and validated by C-Taipei (BSMI) as a CAB to conduct tests as described in the APEC Mutual Recognition Agreement (US0017). GOST Northwest EMC, Inc. has been assessed and accredited by the Russian Certification bodies Certinform VNIINMASH, CERTINFO, SAMTES, and Federal CHEC, to perform EMC and Hygienic testing for Information Technology Products. As a result of their laboratory assessment, they will accept test results from Northwest EMC, Inc. for product certification KCC Northwest EMC, Inc is a CAB designated by MRA partners and recognized by Korea. (Assigned Lab Numbers: Hillsboro: US0017, Irvine: US0158, Sultan: US0157, Brooklyn Park: US0175) VIETNAM Vietnam MIC has approved Northwest EMC as an accredited test lab. Per Decision No. 194/QD-QLCL (dated December 15, 2009), Northwest EMC test reports can be used for Vietnam approval submissions. SCOPE For details on the Scopes of our Accreditations, please visit: http://www.nwemc.com/accreditations/ Report No. ELEC0001 5/21

Northwest EMC Locations Oregon California Minnesota Washington New York Labs EV01-EV12 Labs OC01-OC13 Labs MN01-MN08 Labs SU01-SU07 Labs WA01-WA04 th 22975 NW Evergreen Pkwy 41 Tesla 9349 W Broadway Ave. 14128 339 Ave. SE 4939 Jordan Rd. Suite 400 Irvine, CA 92618 Brooklyn Park, Sultan, WA 98294 Elbridge, NY 13060 Hillsboro, OR 97124 (949) 861-8918 MN 55445 (360) 793-8675 (315) 685-0796 (503) 844-4066 (763) 425-2281 Report No. ELEC0001 6/21

Northwest EMC Product Description Rev 11/17/06 Party Requesting the Test Company Name: Electronic Controls Design, Inc. Address: 4287A SE International Way City, State, Zip: Milwaukie, OR 97222 Test Requested By: Paul Austen Model: SGM2 First Date of Test: May 11, 2011 Last Date of Test: May 25, 2011 Receipt Date of Samples: May 10, 2011 Equipment Design Stage: Prototype Equipment Condition: No Damage Information Provided by the Party Requesting the Test Functional Description of the EUT (Equipment Under Test): Temperature Recorder Testing Objective: To demonstrate compliance to FCC 15.247 requirements. Report No. ELEC0001 7/21

Northwest Configurations EMC Revision 9/21/05 CONFIGURATION 1 ELEC0001 EUT Description Manufacturer Model/Part Number Serial Number Temperature Electronic Controls Design, Inc. SMG2 ECD-SMG20000005 Recorder Peripherals in test setup boundary Description Manufacturer Model/Part Number Serial Number Power Supply Electronic Controls Design PSB05R-050 P82500263A2 Cables Cable Type Shield Length (m) Ferrite Connection 1 Connection 2 Temperature USB Yes 0.8m No Power Supply Recorder Temperature Thermocouple (x6) No 0.5m No Unterminated Recorder PA = Cable is permanently attached to the device. Shielding and/or presence of ferrite may be unknown. Report No. ELEC0001 8/21

Northwest Modifications EMC Revision 4/28/03 Equipment modifications Item Date Test Modification Note Disposition of EUT Improved ground at Spurious Modified from RF antenna port. EUT remained at 1 5/11/2011 Radiated delivered Modification Northwest EMC Emissions configuration. authorized by Paul following the test. Austen. No EMI suppression Tested as devices were added or Scheduled testing 2 5/25/2011 Dwell Time delivered to modified during this was completed. Test Station. test. Report No. ELEC0001 9/21

NORTHWEST XMit 2010.11.03 EMC DWELL TIME Testing was performed using the mode(s) of operation and configuration(s) noted within the report. The individuals and/or the organization requesting the test provided the modes, configurations and settings used to complete the evaluation. The actual test parameters are specified in the test data, this includes items such as investigated frequency range (scanned) and test levels. The testing methods and performance specifications, as well as the test site used for the evaluation are indicated in the test data. TEST EQUIPMENT Description Manufacturer Model ID Last Cal. Interval Antenna, Horn ETS 3115 AIB 9/8/2010 24 EV12 Cables N/A Double Ridge Horn Cables EVT 11/22/2010 12 Spectrum Analyzer Agilent E4440A AAW 4/19/2011 12 MEASUREMENT UNCERTAINTY A measurement uncertainty estimation has been performed for each test per our internal quality document WP 342. The estimation is used to compare the measured result with its "true" or theoretically correct value. The expanded measurement uncertainty for radiated emissions measurements is less than +/- 4 dB, and for conducted emissions measurements is less than +/- 2.7 dB. Our measurement data meets or exceeds the measurement uncertainty requirements of CISPR 16-4; therefore, the test data can be compared directly to the specification limit to determine compliance. The calculations for measurement uncertainty are available upon request. TEST DESCRIPTION If the dwell time per channel of the hopping signal is less than 100 ms, then the average reading may be further adjusted by a “duty cycle correction factor”. The duty cycle correction factor is determined by measuring the worst case duty cycle for a single hopping channel. The total transmit time in any 100ms period should be measured, or for the actual period of the transmission if it is less than 100ms. Report No. ELEC0001 10/21

NORTHWEST XMit 2010.11.03 EMC DWELL TIME EUT: SMG2 Work Order: ELEC0001 Serial Number: ECD-SMG20000005 Date: 05/25/11 Customer: Electronic Controls Design, Inc. Temperature: 22.5°C Attendees: Paul Austen Humidity: 37% Project: None Barometric Pres.: 1020 Tested by: Ethan Schoonover Power: 120VAC 60Hz Job Site: EV12 TEST SPECIFICATIONS Test Method FCC 15.247:2011 ANSI C63.10:2009 COMMENTS Duty Cycle = 20 * log (On time in ms / 100ms), where the "On time" = 100ms - (Total off time). There are 21 short blanking intervals and 1 long blanking interval. Total off time = (21 * 0.591ms) + 30.13ms = 42.5 ms. On time = 100ms - 42.5ms = 57.5ms. Duty cyle correction factor = 20 * log (57.5ms/100ms) = -4.81 DEVIATIONS FROM TEST STANDARD None Configuration # 1 Signature Value Limit Results Long blanking interval Low Channel, 2405 MHz 30.13 ms N/A N/A Short blanking interval Low Channel, 2405 MHz 0.591 ms N/A N/A Period Low Channel, 2405 MHz 2.135 s N/A N/A Report No. ELEC0001 11/21

NORTHWEST XMit 2010.11.03 EMC DWELL TIME Long blanking interval Result: N/A Value: 30.13 ms Limit: N/A Short blanking interval Result: N/A Value: 0.591 ms Limit: N/A Report No. ELEC0001 12/21

NORTHWEST XMit 2010.11.03 EMC DWELL TIME Period Result: N/A Value: 2.135 s Limit: N/A Report No. ELEC0001 13/21

NORTHWEST XMit 2010.11.03 EMC DWELL TIME IMG_0816.JPG IMG_0815.JPG Report No. ELEC0001 14/21

NORTHWEST PSA 2011.04.26 EMC Spurious Radiated Emissions Testing was performed using the mode(s) of operation and configuration(s) noted within the report. The individuals and/or the organization requesting the test provided the modes, configurations and settings used to complete the evaluation. The actual test parameters are specified in the test data, this includes items such as investigated frequency range (scanned) and test levels. The testing methods and performance specifications, as well as the test site used for the evaluation are indicated in the test data. MODES OF OPERATION Hopping Through channels POWER SETTINGS INVESTIGATED 120VAC/60Hz FREQUENCY RANGE INVESTIGATED Start Frequency 30 MHz Stop Frequency 26.5 GHz SAMPLE CALCULATIONS Radiated Emissions: Field Strength = Measured Level + Antenna Factor + Cable Factor - Amplifier Gain + Distance Adjustment Factor + External Attenuation TEST EQUIPMENT Description Manufacturer Model ID Last Cal. Interval Antenna, Horn ETS Lindgren 3160-09 AIV NCR 0 Antenna, Horn ETS 3160-08 AIA NCR 0 Antenna, Horn ETS 3160.07 AHZ 9/8/2010 24 Antenna, Horn ETS 3115 AIB 9/8/2010 24 Antenna, Biconilog EMCO 3141 AXG 3/15/2010 24 Cable ESM Cable Corp. KMKM-72 EVY 9/15/2010 12 EV12 Cables N/A Standard Gain Horn Cables EVU 7/14/2010 12 EV12 Cables N/A Double Ridge Horn Cables EVT 11/22/2010 12 EV12 Cables N/A Bilog Cables EVS 7/14/2010 12 Pre-Amplifier Miteq AMF-6F-18002650-25-10P AVU 9/15/2010 12 Pre-Amplifier Miteq AMF-6F-12001800-30-10P AVI 7/14/2010 12 Pre-Amplifier Miteq AMF-6F-08001200-30-10P AVH 7/14/2010 12 Pre-Amplifier Miteq AMF-3D00100800-32-13P AVF 7/14/2010 12 Pre-Amplifier Miteq AM-1616-1000 AVM 7/14/2010 12 Spectrum Analyzer Agilent E4440A AAW 4/19/2011 12 MEASUREMENT BANDWIDTHS Frequency Range Peak Data Quasi-Peak Data Average Data (MHz) (kHz) (kHz) (kHz) 0.01 - 0.15 1.0 0.2 0.2 0.15 - 30.0 10.0 9.0 9.0 30.0 - 1000 100.0 120.0 120.0 Above 1000 1000.0 N/A 1000.0 Measurements were made using the bandwidths and detectors specified. No video filter was used. MEASUREMENT UNCERTAINTY A measurement uncertainty estimation has been performed for each test per our internal quality document WP 342. The estimation is used to compare the measured result with its "true" or theoretically correct value. Our measurement data meets or exceeds the measurement uncertainty requirements of CISPR 16-4. The measurement uncertainty estimation is available upon request. TEST DESCRIPTION The highest gain of each type of antenna to be used with the EUT was tested. The EUT was configured for low, mid, and high band transmit frequencies. For each configuration, the spectrum was scanned throughout the specified range. In addition, measurements were made in the restricted bands to verify compliance. While scanning, emissions from the EUT were maximized by rotating the EUT on a turntable, adjusting the position of the EUT and the EUT antenna in three orthogonal axis, and adjusting measurement antenna height and polarization, and manipulating the EUT antenna in 3 orthogonal planes (per ANSI C63.10:2009). A preamp and high pass filter were used for this test in order to provide sufficient measurement sensitivity. Report No. ELEC0001 15/21

NORTHWEST PSA 2011.04.26 EMC Spurious Radiated Emissions EMI 2008.1.9 EUT: SMG2 Work Order: ELEC0001 Serial Number: ECD-SMG20000005 Date: 05/25/11 Customer: Electronic Controls Design, Inc. Temperature: 22.5 Attendees: Paul Austen Humidity: 37% Project: None Barometric Pres.: 1020 Tested by: Ethan Schoonover Power: 120VAC/60Hz Job Site: EV12 TEST SPECIFICATIONS Test Method FCC 15.247:2011 ANSI C63.10:2009 TEST PARAMETERS Antenna Height(s) (m) 1-4 Test Distance (m) 3 COMMENTS None EUT OPERATING MODES Hopping Through channels DEVIATIONS FROM TEST STANDARD No deviations. Run # 1 Configuration # 1 Results Pass Signature 80.0 70.0 60.0 50.0 dBuV/m 40.0 30.0 20.0 10.0 0.0 2380.000 2400.000 2420.000 2440.000 2460.000 2480.000 2500.000 MHz Duty Cycle External Distance Compared to Freq Amplitude Factor Azimuth Height Correction Attenuation Polarity Detector Adjustment Adjusted Spec. Limit Spec. (MHz) (dBuV) (dB) (degrees) (meters) Factor (dB) (dB) dBuV/m dBuV/m (dB) Comments 2480.030 71.0 -0.1 119.0 1.4 4.6 20.0 H-Horn AV 0.0 86.3 EUT Vert. Marker Delta Method: 2483.500 119.0 1.4 0.0 20.0 H-Horn AV 0.0 51.7 54.0 -2.3 Peak 86.3 + -34.58 dBc = 51.72 2483.500 38.7 -0.1 65.0 1.0 4.8 20.0 V-Horn AV 0.0 53.8 54.0 -0.2 EUT Horz 2483.500 38.6 -0.1 360.0 1.4 4.8 20.0 H-Horn AV 0.0 53.7 54.0 -0.3 EUT On side. 2483.500 38.4 -0.1 135.0 1.0 4.8 20.0 H-Horn AV 0.0 53.5 54.0 -0.5 EUT Horz 2483.500 53.3 -0.1 119.0 1.0 0.0 20.0 H-Horn PK 0.0 73.2 74.0 -0.8 EUT Vert 2483.500 37.7 -0.1 314.0 1.0 4.8 20.0 V-Horn AV 0.0 52.8 54.0 -1.2 EUT On side. 2483.500 37.6 -0.1 168.0 1.1 4.8 20.0 V-Horn AV 0.0 52.7 54.0 -1.3 EUT Vert. 2483.500 49.9 -0.1 360.0 1.4 0.0 20.0 H-Horn PK 0.0 69.8 74.0 -4.2 EUT On side. 2483.500 49.2 -0.1 65.0 1.0 0.0 20.0 V-Horn PK 0.0 69.1 74.0 -4.9 EUT Horz 2483.500 48.6 -0.1 168.0 1.1 0.0 20.0 V-Horn PK 0.0 68.5 74.0 -5.5 EUT Vert. 2483.500 47.5 -0.1 135.0 1.0 0.0 20.0 H-Horn PK 0.0 67.4 74.0 -6.6 EUT Horz 2483.500 46.0 -0.1 314.0 1.0 0.0 20.0 V-Horn PK 0.0 65.9 74.0 -8.1 EUT On side. 2389.500 26.4 -0.3 271.0 1.0 4.8 20.0 V-Horn AV 0.0 41.3 54.0 -12.7 EUT Horz 2389.500 26.2 -0.3 131.0 1.3 4.8 20.0 H-Horn AV 0.0 41.1 54.0 -12.9 EUT Horz 2389.500 40.8 -0.3 131.0 1.3 0.0 20.0 H-Horn PK 0.0 60.5 74.0 -13.5 EUT Horz 2389.500 39.6 -0.3 271.0 1.0 0.0 20.0 V-Horn PK 0.0 59.3 74.0 -14.7 EUT Horz Report No. ELEC0001 16/21

NORTHWEST PSA 2011.04.26 EMC Spurious Radiated Emissions EMI 2008.1.9 EUT: SMG2 Work Order: ELEC0001 Serial Number: ECD-SMG20000005 Date: 05/25/11 Customer: Electronic Controls Design, Inc. Temperature: 22.5 Attendees: Paul Austen Humidity: 37% Project: None Barometric Pres.: 1020 Tested by: Ethan Schoonover Power: 120VAC/60Hz Job Site: EV12 TEST SPECIFICATIONS Test Method FCC 15.247:2011 ANSI C63.10:2009 TEST PARAMETERS Antenna Height(s) (m) 1-4 Test Distance (m) 3 COMMENTS None EUT OPERATING MODES Hopping Through channels DEVIATIONS FROM TEST STANDARD No deviations. Run # 1 Configuration # 1 Results Pass Signature Report No. ELEC0001 17/21

NORTHWEST PSA 2011.04.26 EMC Spurious Radiated Emissions EMI 2008.1.9 EUT: SMG2 Work Order: ELEC0001 Serial Number: ECD-SMG20000005 Date: 05/11/11 Customer: Electronic Controls Design, Inc. Temperature: 22.5 Attendees: Paul Austen Humidity: 37% Project: None Barometric Pres.: 1020 Tested by: Ethan Schoonover Power: 120VAC/60Hz Job Site: EV12 TEST SPECIFICATIONS Test Method FCC 15.247:2011 ANSI C63.10:2009 TEST PARAMETERS Antenna Height(s) (m) 1-4 Test Distance (m) 3 COMMENTS None EUT OPERATING MODES Tx DEVIATIONS FROM TEST STANDARD No deviations. Run # 2 Configuration # 1 Results Pass Signature 80.0 70.0 60.0 50.0 dBuV/m 40.0 30.0 20.0 10.0 0.0 3000.000 4000.000 5000.000 6000.000 7000.000 8000.000 9000.000 10000.000 MHz External Distance Compared to Freq Amplitude Factor Azimuth Height Distance Attenuation Polarity Detector Adjustment Adjusted Spec. Limit Spec. (MHz) (dBuV) (dB) (degrees) (meters) (meters) (dB) (dB) dBuV/m dBuV/m (dB) Comments 7441.060 34.4 18.7 209.0 1.0 3.0 0.0 V-Horn AV 0.0 53.1 54.0 -0.9 EUT Horz. 7441.060 34.1 18.7 202.0 1.7 3.0 0.0 H-Horn AV 0.0 52.8 54.0 -1.2 EUT Horz. 7321.400 33.3 18.2 0.0 1.0 3.0 0.0 V-Horn AV 0.0 51.5 54.0 -2.5 EUT Horz. 7321.400 31.9 18.2 350.0 1.0 3.0 0.0 H-Horn AV 0.0 50.1 54.0 -3.9 EUT Horz. 4960.700 37.6 9.6 321.0 1.0 3.0 0.0 H-Horn AV 0.0 47.2 54.0 -6.8 EUT Horz. 4811.030 37.9 9.1 273.0 1.0 3.0 0.0 V-Horn AV 0.0 47.0 54.0 -7.0 EUT Horz. 4811.030 37.6 9.1 285.0 1.0 3.0 0.0 H-Horn AV 0.0 46.7 54.0 -7.3 EUT on side. 4811.030 37.5 9.1 299.0 1.0 3.0 0.0 H-Horn AV 0.0 46.6 54.0 -7.4 EUT Vert 4811.030 37.2 9.1 176.0 1.0 3.0 0.0 V-Horn AV 0.0 46.3 54.0 -7.7 EUT Vert 4880.960 36.8 9.3 316.0 1.0 3.0 0.0 H-Horn AV 0.0 46.1 54.0 -7.9 EUT Horz. 4960.700 36.2 9.6 257.0 1.6 3.0 0.0 V-Horn AV 0.0 45.8 54.0 -8.2 EUT Horz. 4811.030 35.8 9.1 312.0 1.0 3.0 0.0 H-Horn AV 0.0 44.9 54.0 -9.1 EUT Horz. 4811.030 35.5 9.1 33.0 1.0 3.0 0.0 V-Horn AV 0.0 44.6 54.0 -9.4 EUT on side. 7441.060 42.8 18.7 209.0 1.0 3.0 0.0 V-Horn PK 0.0 61.5 74.0 -12.5 EUT Horz. 7441.060 42.7 18.7 202.0 1.7 3.0 0.0 H-Horn PK 0.0 61.4 74.0 -12.6 EUT Horz. 7321.400 41.8 18.2 0.0 1.0 3.0 0.0 V-Horn PK 0.0 60.0 74.0 -14.0 EUT Horz. 7321.400 40.5 18.2 350.0 1.0 3.0 0.0 H-Horn PK 0.0 58.7 74.0 -15.3 EUT Horz. 4960.700 45.3 9.6 321.0 1.0 3.0 0.0 H-Horn PK 0.0 54.9 74.0 -19.1 EUT Horz. 4811.030 45.7 9.1 273.0 1.0 3.0 0.0 V-Horn PK 0.0 54.8 74.0 -19.2 EUT Horz. 4811.030 45.4 9.1 285.0 1.0 3.0 0.0 H-Horn PK 0.0 54.5 74.0 -19.5 EUT on side. 4811.030 45.1 9.1 299.0 1.0 3.0 0.0 H-Horn PK 0.0 54.2 74.0 -19.8 EUT Vert 4960.700 44.2 9.6 257.0 1.6 3.0 0.0 V-Horn PK 0.0 53.8 74.0 -20.2 EUT Horz. 4880.960 44.4 9.3 316.0 1.0 3.0 0.0 H-Horn PK 0.0 53.7 74.0 -20.3 EUT Horz. 4811.030 44.1 9.1 176.0 1.0 3.0 0.0 V-Horn PK 0.0 53.2 74.0 -20.8 EUT Vert 4811.030 43.8 9.1 312.0 1.0 3.0 0.0 H-Horn PK 0.0 52.9 74.0 -21.1 EUT Horz. 4811.030 43.4 9.1 33.0 1.0 3.0 0.0 V-Horn PK 0.0 52.5 74.0 -21.5 EUT on side. Report No. ELEC0001 18/21





Document Created: 2011-06-06 16:31:18
Document Modified: 2011-06-06 16:31:18
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC