User Manual 2 of 2

FCC ID: MLBHLIS-1

Users Manual

Download: PDF
FCCID_553146

04/07/21    12:18:45        31S2A650         0055




    Immobilizer System

    The Immobilizer System protects           If the system repeatedly does not        As required by the FCC:
    your vehicle from theft. If an            recognize the coding of your key,        This device complies with Part 15 of the
    improperly-coded key (or other            contact your dealer.                     FCC rules. Operation is subject to the
    device) is used, the engine’s fuel                                                 following two conditions: (1) This device
    system is disabled.                       Do not attempt to alter this system      may not cause harmful interference, and
                                              or add other devices to it. Electrical   (2) this device must accept any
    When you turn the ignition switch to      problems could result that may make      interference received, including
    ON (II), the Immobilizer System           your vehicle undriveable.                interference that may cause undesired
    indicator should come on for a few                                                 operation.
    seconds, then go out. If the indicator    If you have lost your key and cannot
    starts to blink, it means the system      start your engine, contact your          Changes or modifications not expressly
    does not recognize the coding of the      dealer.                                  approved by the party responsible for
    key. Turn the ignition switch to                                                   compliance could void the user’s
    LOCK (0), remove the key, reinsert                                                 authority to operate the equipment.
    it, and turn the switch to ON (II)
    again.                                                                             This device complies with Industry
                                                                                       Canada Standard RSS-210.
    The system may not recognize your                                                  Operation is subject to the following two
    key’s coding if another immobilizer                                                conditions: (1) this device may not cause
    key or other metal object (i.e. key                                                interference, and (2) this device must
    fob) is near the ignition switch when                                              accept any interference that may cause
    you insert the key.                                                                undesired operation of the device.




    52



Document Created: 2005-04-06 09:52:06
Document Modified: 2005-04-06 09:52:06

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC